Les images sont à titre de référence uniquement. Voir les spécifications du produit
Commandes de plus de
$5000AD5200BRMZ10
Digital Potentiometer ICs 8-Bit Digital POT
Marques: Analog Devices Inc.
Pièce Fabricant #: AD5200BRMZ10
Fiche de données: AD5200BRMZ10 Fiche de données (PDF)
Colis/Caisse: 10-TFSOP
Statut RoHS:
État des stocks: 7 463 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
AD5200BRMZ10 Description générale
The AD5200 and AD5201 are programmable resistor devices, with 256 positions and 33 positions respectively, that can be digitally controlled through a 3-wire SPI serial interface. The terms programmable resistor, variable resistor (VR), and RDAC are commonly used interchangeably to refer to digital potentiometers. These devices perform the same electronic adjustment functionas a potentiometer or variable resistor. Both AD5200 / AD5201 contain a single variable resistor in the compact MSOP package. Each device contains a fixed wiper resistance at the wiper contact that taps the programmable resistance at a point determined by a digital code. The code is loaded in the serialinput register. The resistance between the wiper and either end point of the programmable resistor varies linearly with respect to the digital code transferred into the VR latch. Each variable resistor offers a completely programmable value of resistance, between the A terminal and the wiper, or the B terminal and the wiper. The fixed A-to-B terminal resistance of 10 kΩ or 50 kΩ has a nominal temperature coefficient of 500 ppm/°C. The VR has a VR latch that holds its programmed resistance value. The VR latch is updated from an SPI-compatible serial-to-parallel shift register that is loaded from a standard 3-wire serial-input digital interface. Eight data bits for the AD5200 and six databits for the AD5201 make up the data word that is clocked into the serial input register. The internal preset forces the wiper to the midscale position by loading 80H and 10H into AD5200 and AD5201 VR latches respectively. The SHDN pin forces the resistor to an end-to-end open-circuit condition on the A terminal and shorts the wiper to the B terminal, achieving a microwatt power shutdown state. When SHDN is returned to logic high, the previous latch setting puts the wiper in the same resistance setting prior to shutdown. The digital interface is still active during shutdown so that code changes can be made that will produce a new wiper position when the device is returned from shutdown.
Caractéristiques
- 10K, 50K Ohm End-to-End Terminal Resistance
- 33 Position AD5201 Wiper Connects Directly to Both End Terminals
- 3-Wire SPI Compatible Serial Data Input
- +2.7 V to +5.5 V Single-Supply; ±2.7 V Dual-Supply Operation, Ideal for Ground
- Referenced AC Signals
Application
- Mechanical Potentiometer Replacement
- Instrumentation: Gain, Offset Adjustment
- Programmable Voltage to Current Conversion
- Programmable Filters, Delays, Time Constants
- Line Impedance Matching
Caractéristiques
| Paramètre | Valeur | Paramètre | Valeur |
|---|---|---|---|
| Package | Tube | Product Status | Active |
| Programmabe | Not Verified | Taper | Linear |
| Configuration | Potentiometer | Number of Circuits | 1 |
| Number of Taps | 256 | Resistance (Ohms) | 10k |
| Interface | SPI | Memory Type | Volatile |
| Voltage - Supply | 2.7V ~ 5.5V, ±2.3V ~ 2.7V | Tolerance | ±30% |
| Temperature Coefficient (Typ) | 500ppm/°C | Mounting Type | Surface Mount |
| Supplier Device Package | 10-MSOP | Package / Case | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) |
| Operating Temperature | -40°C ~ 85°C | Resistance - Wiper (Ohms) (Typ) | 50 |
| Base Product Number | AD5200 |
Expédition
| Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
| Modalités de paiement | Frais de main | |
|---|---|---|
 |
Virement bancaire | facturer des frais bancaires de 30,00 $ US. |
 |
Pay Pal | facturer des frais de service de 4,0 %. |
 |
Carte de crédit | facturez des frais de service de 3,5%. |
 |
Western union | charge US.00 banking fee. |
 |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
![Produit]( "Produit")
Étape1 :Produit
-
![Emballage sous vide]( "Emballage sous vide")
Étape2 :Emballage sous vide
-
![Sac antistatique]( "Sac antistatique")
Étape3 :Sac antistatique
-
![Emballage individuel]( "Emballage individuel")
Étape4 :Emballage individuel
-
![Boîtes d'emballage]( "Boîtes d'emballage")
Étape5 :Boîtes d'emballage
-
![étiquette d'expédition à code-barres]( "étiquette d'expédition à code-barres")
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The AD5200BRMZ10 is a digitally-controlled potentiometer chip that provides 256-position adjustment for precision control in electronic circuits. It operates on a voltage range of 2.7V to 5.5V and offers non-volatile memory, allowing the settings to be retained even when the power is turned off. This chip is commonly used in applications such as audio volume control, LED brightness adjustment, and sensor calibration.
-
Equivalent
Equivalent alternatives to the AD5200BRMZ10 chip include the AD5200BRM10, AD5200BRM50, AD5200BRM100, and AD5200BRZ10. These devices are also digitally controlled potentiometers and offer similar functionality and performance characteristics. -
Features
The AD5200BRMZ10 is a digitally controlled, non-volatile programmable potentiometer with 256 positions and a maximum resistance of 10 kΩ. It operates from a single supply of 2.7 V to 5.5 V and is designed for audio volume control, sensor calibration, and offset adjustment applications. -
Pinout
The AD5200BRMZ10 is a single-channel, non-volatile digital potentiometer with 256 resistor taps. It has a 10 kΩ resistance value and is controlled via a two-wire I2C interface. The device is available in a 10-lead MSOP package and has VREF, SDA, SCL, and GND pins. -
Manufacturer
Analog Devices is the manufacturer of the AD5200BRMZ10. It is a multinational semiconductor company that specializes in designing and manufacturing integrated circuits for various industries including automotive, communication, and industrial applications. Analog Devices is known for its high-performance analog and digital signal processing products. -
Application Field
AD5200BRMZ10 is commonly used in industrial automation, automotive, and communication systems for digital potentiometer applications. It is also suitable for use in audio equipment, medical devices, and test and measurement instruments. Its precision, low power consumption, and small size make it ideal for a wide range of electronic devices. -
Package
The AD5200BRMZ10 chip is a digitally programmable resistor with a 10kΩ resistance value. It comes in a 6-lead SC70 package with a size of 2mm x 2mm.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
![Produit]( "Produit")
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
![quantity]( "quantity")
La quantité minimum de commande commence à partir de 1 pièce.
-
![shipping]( "shipping")
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
![garantie]( "garantie")
Garantie de qualité de 365 jours pour tous les produits
