Commandes de plus de
$5000AT91SO100
ARM Microcontroller - MCU for embedded applications
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Marques: MICROCHIP TECHNOLOGY INC
Pièce Fabricant #: AT91SO100
Fiche de données: AT91SO100 Fiche de données (PDF)
Colis/Caisse: BGA256
Statut RoHS:
État des stocks: 5 907 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Caractéristiques
- 400 MHz ARM926EJ-S™ ARM® Thumb® Processor
- – 32 Kbytes Data Cache, 32 Kbytes Instruction Cache, MMU
- Memories
- – DDR2 Controller 4-bank DDR2/LPDDR, SDRAM/LPSDR
- – External Bus Interface supporting 4-bank DDR2/LPDDR, SDRAM/LPSDR, Static Memories, CompactFlash, SLC NAND Flash with ECC
- – One 64-Kbyte internal SRAM, single-cycle access at system speed or processor speed through TCM interface
- – One 64-Kbyte internal ROM, embedding bootstrap routine
- Peripherals
- – LCD Controller supporting STN and TFT displays up to 1280860
- – ITU-R BT. 601/656 Image Sensor Interface
- – USB Device High Speed, USB Host High Speed and USB Host Full Speed with On-Chip Transceiver
- – 10/100 Mbps Ethernet MAC Controller
- – Two High Speed Memory Card Hosts (SDIO, SDCard, MMC)
- – AC97 controller
- – Two Master/Slave Serial Peripheral Interfaces
- – Two Three-channel 16-bit Timer/Counters
- – Two Synchronous Serial Controllers (I2S mode)
- – Four-channel 16-bit PWM Controller
- – Two Two-wire Interfaces
- – Four USARTs with ISO7816, IrDA, Manchester and SPI modes
- – 8-channel 10-bit ADC with 4-wire Touch Screen support
- – Write Protected Registers
- System
- – 133 MHz twelve 32-bit layer AHB Bus Matrix
- – 37 DMA Channels
- – Boot from NAND Flash, SDCard, DataFlash® or serial DataFlash
- – Reset Controller with on-chip Power-on Reset
- – Selectable 32768 Hz Low-power and 12 MHz Crystal Oscillators
- – Internal Low-power 32 kHz RC Oscillator
- – One PLL for the system and one 480 MHz PLL optimized for USB High Speed
- – Two Programmable External Clock Signals
- – Advanced Interrupt Controller and Debug Unit
- – Periodic Interval Timer, Watchdog Timer, Real Time Timer and Real Time Clock
- – Five 32-bit Parallel Input/Output Controllers
- – 160 Programmable I/O Lines Multiplexed with up to Two Peripheral I/Os with Schmitt trigger input
- Package
- – 324-ball TFBGA, pitch 0.8 mm
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Source Content uid | AT91SO100 | Part Life Cycle Code | Active |
Ihs Manufacturer | MICROCHIP TECHNOLOGY INC | Reach Compliance Code | compliant |
ECCN Code | 3A991.A.2 | HTS Code | 8542.31.00.01 |
Has ADC | NO | Address Bus Width | 24 |
Bit Size | 32 | Boundary Scan | NO |
CPU Family | SC100 | Clock Frequency-Max | 50 MHz |
DAC Channels | NO | DMA Channels | NO |
External Data Bus Width | 16 | Format | FIXED POINT |
Integrated Cache | YES | JESD-30 Code | S-PBGA-B256 |
Length | 15 mm | Low Power Mode | YES |
Number of I/O Lines | 40 | Number of Serial I/Os | 2 |
Number of Terminals | 256 | Number of Timers | 2 |
On Chip Data RAM Width | 8 | On Chip Program ROM Width | 8 |
PWM Channels | NO | Package Body Material | PLASTIC/EPOXY |
Package Code | LFBGA | Package Equivalence Code | BGA256,17X17,32 |
Package Shape | SQUARE | Package Style | GRID ARRAY, LOW PROFILE, FINE PITCH |
RAM (bytes) | 102400 | ROM (words) | 262144 |
ROM Programmability | EEPROM | Seated Height-Max | 1.25 mm |
Supply Voltage-Max | 3.63 V | Supply Voltage-Min | 2.97 V |
Supply Voltage-Nom | 3.3 V | Surface Mount | YES |
Technology | CMOS | Terminal Form | BALL |
Terminal Pitch | 0.8 mm | Terminal Position | BOTTOM |
Width | 15 mm | uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
Product Category | ARM Microcontrollers - MCU | Series | 91S |
Mounting Style | SMD/SMT | Package / Case | BGA-256 |
Core | ARM SC100 | Program Memory Size | 256 kB |
Data Bus Width | 32 bit | ADC Resolution | No ADC |
Maximum Clock Frequency | 50 MHz | Number of I/Os | 40 I/O |
Data RAM Size | 96 kB | Supply Voltage - Min | 2.97 V |
Supply Voltage - Max | 3.63 V | Minimum Operating Temperature | 0 C |
Maximum Operating Temperature | + 70 C | Brand | Microchip Technology / Atmel |
Height | 0.53 mm | Interface Type | SPI, UART, USB |
Number of Timers/Counters | 3 Timer | Product Type | ARM Microcontrollers - MCU |
Program Memory Type | EPROM | Subcategory | Microcontrollers - MCU |
Unit Weight | 0.098203 oz |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
![]() |
Virement bancaire | facturer des frais bancaires de 30,00 $ US. |
![]() |
Pay Pal | facturer des frais de service de 4,0 %. |
![]() |
Carte de crédit | facturez des frais de service de 3,5%. |
![]() |
Western union | charge US.00 banking fee. |
![]() |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits