ATTINY261V-10PU

ATTINY261V-10PU Description générale

The ATTINY261V-10PU is a versatile microcontroller that offers a wide range of features for embedded applications. With its low voltage range of 1.8V to 5.5V, this microcontroller is suitable for a variety of projects that require efficient power consumption. Its 2KB of Flash memory provides ample storage for program codes, while the 128 bytes of SRAM and EEPROM offer additional memory for data storage. The 18 GPIO pins allow for easy interfacing with external devices, making it easy to expand the capabilities of the microcontroller

Caractéristiques

• High Performance, Low Power AVR® 8-Bit Microcontroller
• Advanced RISC Architecture
• – 123 Powerful Instructions – Most Single Clock Cycle Execution
• – 32 x 8 General Purpose Working Registers
• – Fully Static Operation
• Non-volatile Program and Data Memories
• – 2/4/8K Byte of In-System Programmable Program Memory Flash (ATtiny261/461/861) Endurance: 10,000 Write/Erase Cycles
• – 128/256/512 Bytes In-System Programmable EEPROM (ATtiny261/461/861) Endurance: 100,000 Write/Erase Cycles
• – 128/256/512 Bytes Internal SRAM (ATtiny261/461/861)
• – Programming Lock for Self-Programming Flash Program and EEPROM Data Security
• Peripheral Features
• – 8/16-bit Timer/Counter with Prescaler and Two PWM Channels
• – 8/10-bit High Speed Timer/Counter with Separate Prescaler
• 3 High Frequency PWM Outputs with Separate Output Compare Registers Programmable Dead Time Generator
• – Universal Serial Interface with Start Condition Detector
• – 10-bit ADC
• 11 Single Ended Channels
• 16 Differential ADC Channel Pairs
• 15 Differential ADC Channel Pairs with Programmable Gain (1x, 8x, 20x, 32x)
• – Programmable Watchdog Timer with Separate On-chip Oscillator
• – On-chip Analog Comparator
• Special Microcontroller Features
• – debugWIRE On-chip Debug System
• – In-System Programmable via SPI Port
• – External and Internal Interrupt Sources
• – Low Power Idle, ADC Noise Reduction, and Power-down Modes
• – Enhanced Power-on Reset Circuit
• – Programmable Brown-out Detection Circuit
• – Internal Calibrated Oscillator
• I/O and Packages
• – 16 Programmable I/O Lines
• – 20-pin PDIP, 20-pin SOIC and 32-pad MLF
• Operating Voltage:
• – 1.8 - 5.5V for ATtiny261V/461V/861V
• – 2.7 - 5.5V for ATtiny261/461/861
• Speed Grade:
• – ATtiny261V/461V/861V: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 10 MHz @ 2.7 - 5.5V
• – ATtiny261/461/861: 0 - 10 MHz @ 2.7 - 5.5V, 0 - 20 MHz @ 4.5 - 5.5V
• Industrial Temperature Range
• Low Power Consumption
• – Active Mode: 1 MHz, 1.8V: 380μA
• – Power-down Mode: 0.1μA at 1.8V

Caractéristiques