Ce site web utilise des cookies. En utilisant ce site, vous consentez à l'utilisation de cookies. Pour plus d'informations, veuillez consulter notre politique de confidentialité.

TI DP83816AVNG 48HRS

Ethernet ICs 10/100 Mbps integrated PCI Ethernet media access controller & physical layer (MacPhyter-II) 144-LQFP 0 to 70

ISO14001 ISO9001 DUNS

Marques: ti

Pièce Fabricant #: DP83816AVNG

Fiche de données: DP83816AVNG Fiche de données (PDF)

Colis/Caisse: TQFP144

Statut RoHS:

État des stocks: 180 pièces, nouveau original

type de produit: More ICs

Warranty: 1 Year Ovaga Warranty - Find Out More

Tarifs

*Tous les prix sont en USD

Qté Prix unitaire Prix ext
1 $11,167 $11,167
200 $4,323 $864,600
500 $4,170 $2085,000
1000 $4,095 $4095,000

In Stock:180 PCS

- +

Citation courte

Veuillez soumettre une demande de prix pour DP83816AVNG ou envoyez-nous un email: E-mail: [email protected], nous vous contacterons dans les 12 heures.

DP83816AVNG Description générale

The DP83816 device is a single-chip 10/100 Mb/s ethernet controller for the PCI bus. It is targeted at low-cost, high-volume PC motherboards, adapter cards, and embedded systems. The DP83816 device fully implements the V2.2 33-MHz PCI bus interface for host communications with power management support. Packet descriptors and data are transferred via bus-mastering, reducing the burden on the host CPU. The DP83816 device can support full-duplex 10/100 Mb/s transmission and reception with minimum interframe gap.

DP83816AVNG

Caractéristiques

  • IEEE 802.3 Compliant, PCI V2.2 Media Access
    Controller (MAC) and Bus Interface Unit (BIU)
    Supports Traditional Data Rates of 10 Mb/s
    Ethernet and 100 Mb/s Fast Ethernet (Through
    Internal PHY)
  • Bus Master – Burst Sizes of up to 128 Dwords
    (512 Bytes)
  • BIU Compliant With PC 97 and PC 98 Hardware
    Design Guides, PC 99 Hardware Design Guide
    Draft, ACPI v1.0, PCI Power Management
    Specification v1.1, OnNow Device Class Power
    Management Reference Specification – Network
    Device Class v1.0a
  • Wake on LAN (WoL) Support Compliant With
    PC98, PC99, SecureOn, and OnNow, Including
    Directed Packets, Magic Packet™ VLAN Packets,
    ARP Packets, Pattern Match Packets, and PHY
    Status Change
  • Clkrun Function for PCI Mobile Design Guide
  • Virtual LAN (VLAN) and Long Frame Support
  • Support for IEEE 802.3× Full-Duplex Flow Control
  • Extremely Flexible Rx Packet Filtration Including:
    Single Address Perfect Filter With MSb Masking,
    Broadcast, 512 Entry Multicast and Unicast Hash
    Table, Deep Packet Pattern Matching for up to
    Four Unique Patterns
  • Statistics Gathered for Support of RFC 1213
    (MIB II), RFC 1398 (Ether-Like MIB), IEEE 802.3
    LME, Reducing CPU Overhead for Management
  • Internal 2KB Transmit and 2KB Receive Data
    FIFOs
  • Serial EEPROM Port With Auto-Load of
    Configuration Data From EEPROM at Power On
  • Flash or PROM Interface for Remote Boot Support
  • Fully Integrated IEEE 802.3 3.3-V CMOS Physical
    Layer
  • IEEE 802.3 10BASE-T Transceiver With Integrated
    Filters IEEE 802.3u 100BASE-TX Transceiver
  • Fully integrated ANSI X3.263 Compliant TP-PMD
    Physical Sublayer With Adaptive Equalization and
    Baseline Wander Compensation
  • IEEE 802.3u Auto-Negotiation – Advertised
    Features Configurable Through EEPROM
  • Full-Duplex Support for 10- and 100-Mb/s Data
    Rates
  • Single 25-MHz Reference Clock
  • 144-pin LQFP Package
  • Low-Power 3.3-V CMOS Design With Typical
    Consumption of 383 mW Operating, 297 mW
    During WoL, and 53 mW During Sleep Mode
  • IEEE 802.3u MII for Connecting Alternative
    External Physical Layer Devices
  • 3.3-V Signaling With 5-V Tolerant I/O

Application

  • Ethernet networking in computer systems, routers, switches, and industrial applications
  • Network communication in Internet of Things (IoT) devices
  • Data transmission and reception in Ethernet-based systems
  • Ethernet connectivity in automotive applications
  • Industrial automation and control systems

Caractéristiques

Paramètre Valeur Paramètre Valeur
Datarate (Mbps) 10/100 Interface type PCI (33MHz)
Number of ports Single Rating Catalog
Features 5-V tolerant I/Os Supply voltage (V) 3.3
Operating temperature range (°C) 0 to 70 Number of LEDs 3
ESD HBM (kV) 2

Expédition

Type d'expédition Frais d'expédition Délai de mise en œuvre
DHL DHL $20.00-$40.00 (0.50 KG) 2-5 jours
Fedex FedEx $20.00-$40.00 (0.50 KG) 2-5 jours
UPS UPS $20.00-$40.00 (0.50 KG) 2-5 jours
TNT TNT $20.00-$40.00 (0.50 KG) 2-5 jours
EMS EMS $20.00-$40.00 (0.50 KG) 2-5 jours
LA POSTE AÉRIENNE ENREGISTRÉE LA POSTE AÉRIENNE ENREGISTRÉE $20.00-$40.00 (0.50 KG) 2-5 jours

Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.

Paiement

Modalités de paiement Frais de main
Virement bancaire Virement bancaire facturer des frais bancaires de 30,00 $ US.
Pay Pal Pay Pal facturer des frais de service de 4,0 %.
Carte de crédit Carte de crédit facturez des frais de service de 3,5%.
Western union Western union charge US.00 banking fee.
Paiement de Petit Montant Paiement de Petit Montant facturer des frais bancaires de 0,00 $ US.

Garanties

1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.

2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.

Emballage

  • Produit

    Étape1 :Produit

  • Emballage sous vide

    Étape2 :Emballage sous vide

  • Sac antistatique

    Étape3 :Sac antistatique

  • Emballage individuel

    Étape4 :Emballage individuel

  • Boîtes d'emballage

    Étape5 :Boîtes d'emballage

  • étiquette d'expédition à code-barres

    Étape6 :étiquette d'expédition à code-barres

Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.

L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.

Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.

Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.

  • ESD
  • ESD

Pièces équivalentes

Pour le DP83816AVNG composant, vous pouvez envisager ces pièces de rechange et alternatives:

Numéro d'article

Marques

Emballer

Description

Numéro d'article :   DP83816AVNG

Marques :  

Emballer :   TQFP144

Description :   None provided. The DP83816AVNG is a unique part with no equivalent substitute mentioned.

Points de pièce

  • The DP83816AVNG chip is a single-chip Ethernet controller designed for low power consumption. It is capable of supporting 10/100 Mbps communication over twisted pair cables. The chip provides functionalities like Auto-MDIX, loopback modes, and power management features. It is commonly used in networking applications, such as routers, switches, and embedded systems, where a reliable and efficient Ethernet connection is required.
  • Equivalent

    Some equivalent products of the DP83816AVNG chip include DP83816AVHG, DP83816AVNG/NOPB, DP83816AVNGX, and DP83816AVNGX/NOPB.
  • Features

    The DP83816AVNG is a Single-Port 10/100 Mb/s Ethernet Physical Layer Transceiver. It supports auto-negotiation and auto-detection of full or half-duplex modes. It also has built-in diagnostics and cable length and quality indicators. It features reduced power consumption and advanced power management options.
  • Pinout

    The DP83816AVNG is a 144-pin QFP package. It is a specifically designed Ethernet transceiver with an integrated 10/100 Mbps physical layer interface. Its functions include auto-negotiation, link establishment, and maintenance of data transfers.
  • Manufacturer

    Texas Instruments is the manufacturer of the DP83816AVNG. It is a semiconductor manufacturing company that designs and produces a wide range of integrated circuits and semiconductor devices.
  • Application Field

    The DP83816AVNG is a networking chip that can be used in various application areas such as Ethernet switches, routers, network interface cards (NICs), and other network communication devices. It provides reliable and high-speed network connectivity, enabling seamless data transmission and communication between devices within a network.
  • Package

    The DP83816AVNG chip is in a 100-pin LQFP (Low Quad Flat Package) form. The package size is 14mm x 14mm.

Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente

  • Produit

    Nous avons des produits riches, pouvons répondre à vos différents besoins.

  • quantity

    La quantité minimum de commande commence à partir de 1 pièce.

  • shipping

    Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $

  • garantie

    Garantie de qualité de 365 jours pour tous les produits

Notes et avis

Notes
Veuillez évaluer le produit !
Merci de saisir un commentaire

Veuillez soumettre vos commentaires après vous être connecté à votre compte.

Soumettre

Recommander