Commandes de plus de
$5000ISP1161A1BD
Low Speed/Full Speed/High Speed USB Single-Chip Host and Device Controller USB 2.0 3.3V/5V 64-Pin LQFP
Marques: STMicroelectronics
Pièce Fabricant #: ISP1161A1BD
Fiche de données: ISP1161A1BD Fiche de données (PDF)
Colis/Caisse: LQFP
Statut RoHS:
État des stocks: 8 172 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
ISP1161A1BD Description générale
Low Speed/Full Speed/High Speed USB Single-Chip Host and Device Controller USB 2.0 3.3V/5V 64-Pin LQFP
Caractéristiques
- Complies withUniversal Serial Bus Specification Rev. 2.0
- The Host Controller portion of the ISP1161A1 supports data transfer at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s)
- The Device Controller portion of the ISP1161A1 supports data transfer at full-speed (12 Mbit/s)
- Combines the HC and the DC in a single chip
- On-chip DC complies with most USB device class specifications
- Both the HC and the DC can be accessed by an external microprocessor via separate I/O port addresses
- Selectable one or two downstream ports for the HC and one upstream port for the DC
- High-speed parallel interface to most of the generic microprocessors and Reduced Instruction Set Computer (RISC) processors such as:
- Hitachi® SuperH™ SH-3 and SH-4
- MIPS-based™ RISC
- ARM7™, ARM9™, StrongARM®
- Maximum 15 Mbyte/s data transfer rate between the microprocessor and the HC, 11.1 Mbyte/s data transfer rate between the microprocessor and the DC
- Supports single-cycle and burst mode DMA operations
- Up to 14 programmable USB endpoints with 2 fixed control IN/OUT endpoints for the DC
- Built-in separate FIFO buffer RAM for the HC (4 kbytes) and DC (2462 bytes)
- Endpoints with double buffering to increase throughput and ease real-time data transfer for both DC transfers and HC isochronous (ISO) transactions
- 6 MHz crystal oscillator with integrated PLL for low EMI
- Controllable LazyClock (100 kHz±50 %) output during ‘suspend’
- Clock output with programmable frequency (3 MHz to 48 MHz)
- Software controlled connection to USB bus (SoftConnect) on upstream port for the DC
- Good USB connection indicator that blinks with traffic (GoodLink) for the DC
- Software selectable internal 15 kΩpull-down resistors for HC downstream ports
- Dedicated pins for suspend sensing output and wake-up control input for flexible applications
- Global hardware reset input pin and separate internal software reset circuits for HC and DC
- Operation from a 5 V or a 3.3 V power supply
- Operating temperature range−40°Cto+85°C
- Available in two LQFP64 packages (SOT314-2 and SOT414-1).
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Part Status | Obsolete | Automotive | |
PPAP | Type | USB Single-Chip Host and Device Controller | |
USB Transceiver | Yes | USB Speed Type | Low Speed|Full Speed|High Speed |
Maximum Data Rate (MBps) | 12 | Maximum Operating Frequency (MHz) | 48 |
Protocols Supported | USB 2.0 | Interface Type | Serial |
Minimum Operating Supply Voltage (V) | 4|3 | Maximum Operating Supply Voltage (V) | 5.5|3.6 |
Typical Operating Supply Voltage (V) | 3.3|5 | Typical Supply Current (mA) | 47 |
Minimum Operating Temperature (°C) | -40 | Maximum Operating Temperature (°C) | 85 |
Mounting | Surface Mount | Package Height | 1.45(Max) |
Package Width | 10.1(Max) | Package Length | 10.1(Max) |
PCB changed | 64 | Standard Package Name | QFP |
Supplier Package | LQFP | Pin Count | 64 |
Lead Shape | Gull-wing |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The ISP1161A1BD chip is an integrated circuit specifically designed for USB host and USB device applications. It provides a high-speed USB 2.0 interface capable of supporting data rates up to 480 Mbps. The chip is commonly used in various electronic devices such as computers, gaming consoles, and automotive systems for reliable and efficient USB connectivity.
-
Features
ISP1161A1BD is a high-speed USB 2.0 OTG transceiver that supports full-speed (12 Mbps) and low-speed (1.5 Mbps) data rates. It features an integrated clock recovery and a 3.3V IO supply. It also supports a wide range of applications, including USB host controllers, USB peripherals, and USB On-The-Go devices. -
Pinout
The ISP1161A1BD is a USB host controller IC. It has a pin count of 80 pins, and its functions include supporting USB 2.0 high-speed and full-speed devices, providing USB host interfaces, data transfer, and control interfaces. -
Manufacturer
The manufacturer of the ISP1161A1BD is NXP Semiconductors. NXP Semiconductors is a global semiconductor manufacturer providing high-performance mixed-signal and standard products. They focus on automotive, industrial, and Internet of Things (IoT) applications. -
Application Field
The ISP1161A1BD is a USB peripheral interface device that is commonly used in industrial automation, automotive electronics, and medical equipment. It provides a high-speed USB connection for data transfer and communication between various devices. -
Package
The ISP1161A1BD chip comes in a SOP-28 package and has a rectangular form with a size of approximately 17.9mm x 7.8mm.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits