Commandes de plus de
$5000Microchip KSZ8567STXV-VAO
7-Port 10/100 AVB Ethernet Switch.
Marques: Microchip Technology, Inc
Pièce Fabricant #: KSZ8567STXV-VAO
Fiche de données: KSZ8567STXV-VAO Fiche de données (PDF)
Colis/Caisse: TQFP-128
Statut RoHS:
État des stocks: 2 953 pièces, nouveau original
type de produit: LED Drivers
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Tous les prix sont en USD
Qté | Prix unitaire | Prix ext |
---|---|---|
1 | $131,309 | $131,309 |
30 | $125,395 | $3761,850 |
En stock: 2 953 PC
KSZ8567STXV-VAO Description générale
The KSZ8567 is a fully integrated layer 2, managed,seven-port 10/100 Ethernet switch with numerousadvanced features, designed to exceed Automotive AEC-Q100 Grade 2 (-40°C to +105°C) and EMC requirements . Five of the seven ports incorporate10/100 Mbps PHYs. The other two ports have 1000 Mbps MAC interfaces that can be configured as SGMII, RGMII, MII or RMII.Either of these may connect directly to a host processor orto an external PHY.
Full register access is available by SPI or I2C interfaces,and by optional in-band management via any of the data ports.PHY register access is provided by a MIIM interface.
Security features include support for IEEE 802.1X port-based authentication and Access Control List (ACL) filtering.
As a member of the EtherSynch® product family, theKSZ8567 incorporates full hardware support for the IEEE1588v2 Precision Time Protocol (PTP), including hardwaretime-stamping at all PHY-MAC interfaces, and a high-resolution hardware “PTP clock”. IEEE 1588 provides sub-microsecond synchronization for a range of industrialEthernet applications.
The KSZ8567 fully supports the IEEE family of audiovideo bridging (AVB) standards, which provide for highquality of service (QoS) for latency sensitive traffic streamsover Ethernet. Time-stamping and time-keeping featuressupport IEEE 802.1AS time synchronization. All portsfeature credit based traffic shapers for IEEE 802.1Qav,and a time aware scheduler as proposed for IEEE802.1Qbv.
An assortment of power-management features includingEnergy-Efficient Ethernet (EEE) have been designed in tosatisfy energy efficient environments.
Microchip's complimentary and confidential LANCheck® online design review service is available for customers who have selected our products for their application design-in. The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.
Caractéristiques
- Non-blocking wire-speed Ethernet switching fabric
- IEEE802.1AS (AVB) time synchronization support
- IEEE802.1Qav (AVB) credit based traffic shaper
- Time aware traffic scheduler with low latency cut- through mode
- IEEE1588v2 Precision Time Protocol support
- Time-stamping on all ports
- Precision GPIO pin timed to the AVB/1588 clock
- Full-featured forwarding and filtering control, including Access Control List (ACL) filtering
- IEEE802.1X support (Port-Based Network Access Control)
- IEEE802.1Q VLAN supportfor 128 active VLAN groups and the full range of 4096 VLAN IDs
- IEEE802.1p/Q tag insertion or removal on a per port basis and support for double-tagging
- VLAN ID tag/untag options on per port basis
- IEEE802.3x full-duplex flow control and half-duplex back pressure collision control
- IGMPv1/v2/v3 snooping for multicast packet filtering
- IPv6 multicast listener discovery (MLD) snooping
- QoS/CoS packets prioritization support: 802.1p, DiffServ-based and re-mapping of 802.1p priority field per-port basis on four priority levels
- IPv4/IPv6 QoS support
- Programmable rate limiting at ingress and egress ports
- Broadcast storm protection
- Four priority queues with dynamic packet mapping for IEEE802.1p, IPv4 DIFFSERV, IPv6 TrafficClass
- MAC filtering function to filter or forward unknown unicast, multicast and VLAN packets
- Self-address filtering for implementing ring topologies
- High-speed SPI (4-wire, up to 50MHz) interface to access all internal registers
- I2C Interface to access all registers
- MII management (MIIM, MDC/MDIO 2 wire) interface to access all PHY registers per IEEE 802.3 specification
- In-band management to access all registers via any of the seven ports, strap enabled
- I/O pin strapping facility to set certain register bits from I/O pins at reset time
- Control registers configurable on-the-fly
- Port mirroring/monitoring/sniffing: ingress and/or egress traffic to any port or MII/RMII
- MIB counters for fully-compliant statistics gathering (34 MIB counters per port)
- Full-chip software power-down
- Energy detect power-down (EDPD)
- Support IEEE P802.3az Energy Efficient Ethernet (EEE)
- Wake on LAN (WoL) support
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Ethernet Bandwidth | 10/100Mbps | Interrupt Pin | Yes |
Op Voltage | 3.3 | # Ethernet Ports | 5 |
Interface | MII/RMII/RGMII/SGMII | IOPins | 1 |
IEEE1588 | Yes | Temp Range Min | -40 |
Temp Range Max | 105 | Dual MII Support | Yes |
Managed | Yes | Copper Support | 10/100 (5) |
Fiber Support | SGMII | Supply Voltage (V) | 3.3 |
Internal LDO | No | Vdd I/O (V) | 1.8/2.5/3.3 |
LinkMD Cable Diag | Yes | Repeater Mode | No |
On-Chip Termination | Yes | Smart Power Adjust | Yes |
Largest Pkt-Size Bytes | 9000 | IPV6 | Yes |
Flow Ctrl | Yes | Rate Limiting | Yes |
Rapid Spanning Tree | Yes |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits