Commandes de plus de
$5000LAN9252V/ML
Ethernet Controller 10/100 Base-FX/T/TX PHY SPI Interface 64-QFN (9x9)
Marques: Microchip Technology
Pièce Fabricant #: LAN9252V/ML
Fiche de données: LAN9252V/ML Fiche de données (PDF)
Colis/Caisse: 64-VFQFNExposedPad
Statut RoHS:
État des stocks: 9 977 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
LAN9252V/ML Description générale
Microchip’s LAN9252 is a 2/3-port EtherCAT device controller (ESC) with dual integrated Ethernet PHYs which each contain a full-duplex 100BASE-TX transceiver and support 100Mbps (100BASE-TX) operation. The LAN9252 supports HP Auto-MDIX, allowing the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber transceiver. This device provides system developers a cost-effective solution for realizing EtherCAT device solutions.
The LAN9252 includes a 3 port EtherCAT device controller with 4K bytes of Dual Port memory (DPRAM), 4 SyncManagers, 3 Fieldbus Memory Management Units (FMMUs) and a 64-bit Distributed Clock.
It supports 4 Process Data Interfaces - SPI/SQI, HBI and a 16 Bit Digital IO. SPI and SQI (high speed SPI) provide a low pin count synchronous slave interface that facilitates communication between the device and a host system. Whereas, the Host Bus Interface facilitates the same via a high-speed asynchronous slave interface. For simple digital modules without micro-controllers, the LAN9252 can also operate in Digital I/O Mode where 16 digital signals can be controlled or monitored by the EtherCAT master.
The LAN9252 can also be configured to operate via a single 3.3V supply utilizing an integrated 3.3V to 1.2V linear regulator. The internal linear regulator may also be disabled, allowing usage of a high efficiency external regulator for lower system power dissipation.
The LAN9252 is available in commercial, industrial and extended industrial temperature ranges and comes in either a 64 pin QFN or a 64 pin TQFP-EP.
Microchip's complimentary and confidential LANCheck® online design review service is available for customers who have selected our products for their application design-in*.
*The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.
Caractéristiques
- Highlights
- 2/3-port EtherCAT device controller with 3 Fieldbus Memory Management Units (FMMUs) and 4 SyncManagers
- Interfaces to 8/16-bit embedded controllers and 32-bit embedded controllers with an 8/16-bit bus
- Dual Integrated Ethernet PHYs with HP Auto-MDIX
- Cable diagnostic support
- 100 Base FX support via external transceiver
- 1.8V to 3.3V variable voltage I/O
- Integrated 1.2V core regulator for single 3.3V operation
- Low pin count, high integration and small body size package
- Target Applications
- Motor Motion Control
- Data Acquisition
- Process/Factory Automation
- Communication Modules & Interface Cards
- Sensors
- Power Grid Automation
- Building Automation
- Hydraulic & Pneumatic Valve Systems
- Operator HMI Interfaces
- Application Examples
- EtherCAT P - A fully compliant EtherCAT P example for UART communications and Motor Control
- EtherCAT Cortex M4F design example - Using SAM E54 & LAN9252
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Package | Tray | Product Status | Active |
Programmabe | Not Verified | Protocol | Ethernet |
Function | Controller | Interface | SPI |
Standards | 10/100 Base-FX/T/TX PHY | Voltage - Supply | 1.8V ~ 3.3V |
Operating Temperature | -40°C ~ 105°C | Package / Case | 64-VFQFN Exposed Pad |
Supplier Device Package | 64-QFN (9x9) |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The LAN9252V/ML is an Ethernet physical layer transceiver (PHY) chip designed for industrial applications. It provides high-speed communication between Ethernet devices over twisted-pair cables. The chip supports various industrial communication standards and features such as diagnostic capabilities and low power consumption.
-
Equivalent
Some equivalent products of the LAN9252V/ML chip are the LAN9250, LAN9253, and LAN9254. These chips are also Ethernet controllers that are designed for industrial applications and support various communication interfaces. -
Features
LAN9252V/ML is a versatile EtherCAT slave controller with integrated dual 10/100 Ethernet PHYs, supporting various industrial Ethernet protocols. It offers 4 integrated FlexRay transceivers for automotive applications, advanced SPI interface for configuration, integrated EEPROM, and high performance, low power consumption. It is suitable for industrial automation, automotive, and other real-time networking applications. -
Pinout
The LAN9252V/ML is a 64-pin QFP package Ethernet controller. It provides two Ethernet ports for communication, along with support for industrial communication protocols such as EtherCAT and PROFINET. The LAN9252V/ML also features integrated 32-bit IEEE 1588 precision time protocol for synchronized networking applications. -
Manufacturer
The manufacturer of the LAN9252V/ML is Microchip Technology Inc. They are a leading provider of microcontroller, mixed-signal and analog semiconductors for a wide range of applications in various industries, including automotive, industrial, and consumer electronics. Microchip is known for their high-quality and innovative semiconductor products. -
Application Field
The LAN9252V/ML is commonly used in industrial automation, robotics, and motion control systems for enabling communication between PLCs, HMIs, and motor drives. It is also used in automotive applications for connecting ECUs, sensors, and actuators in vehicles. Additionally, it is utilized in building automation systems for networking HVAC, lighting, and security devices. -
Package
The LAN9252V/ML chip is a QFN package, which stands for Quad Flat No-Lead. It comes in a 48-pin form and measures 7mm x 7mm in size.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits