Commandes de plus de
$5000TI LM3S2616-IQR50-A0
ARM Microcontrollers - MCU ARM Cortex-M3 128K
Marques: Texas Instruments
Pièce Fabricant #: LM3S2616-IQR50-A0
Fiche de données: LM3S2616-IQR50-A0 Fiche de données (PDF)
Colis/Caisse: LQFP-64
type de produit: Microcontrollers
Statut RoHS:
État des stocks: 6 554 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
LM3S2616-IQR50-A0 Description générale
The Stellaris® LM3S2616 microcontroller is based on the ARM® Cortex™-M3 controller core operating at up to 50 MHz, with 128 kB flash, 16 kB SRAM, a 32-ch DMA, and ROM preloaded with the StellarisWare Driver Library and BootLoader. The LM3S2616 also features real-time industrial connectivity, with a CAN controller, an I2C interface, and a UART. The LM3S2616 microcontroller also features advanced motion control features, including 6 motion-control PWM outputs with dead-band, a quadrature encoder input for precise position monitoring, and a fault protection input for low-latency shutdown. The microcontroller also features intelligent analog capability, including 2 analog comparators and 6 channels of highly accurate 10-bit analog-to-digital conversion - with the ability to sample at speeds of 1M samples per second. Finally, the LM3S2616 microcontroller provides a 24-bit systick timer, 4 32-bit or 8 16-bit general-purpose timers, a watchdog timer, a battery-backed hibernation module with RTC and 256 bytes of non-volatile state-saving memory, a low drop-out voltage regulator so that only one supply voltage is required, brown-out reset, power-on reset controller, and up to 33 GPIOs.
Caractéristiques
32-bit ARM® Cortex™-M3 50-MHz processor core with System Timer (SysTick), integrated Nested Vectored Interrupt Controller (NVIC), Memory Protection Unit (MPU), and Thumb-2 instruction set
Full-featured debug solution with debug access via JTAG and Serial Wire interfaces, and IEEE 1149.1-1990 compliant Test Access Port (TAP) controller
128 KB single-cycle flash and 16 KB single-cycle SRAM
Internal ROM loaded with StellarisWare® software
Lower-power battery-backed Hibernation module with Real-Time Clock
ARM PrimeCell® 32-channel configurable μDMA controller
1-33 GPIOs (depending on configuration) with programmable control for GPIO interrupts and pad configuration
ARM FiRM-compliant Watchdog Timer ; plus four General-Purpose Timer Modules (GPTM), each of which provides two 16-bit timers and can be configured to operate independently
10-bit Analog-to-Digital Converter (ADC) with six analog input channels and a sample rate of one million samples/second
Fully programmable 16C550-type UART with IrDA support
Inter-Integrated Circuit (I2C) Interface, providing Standard (100 Kbps) and Fast (400 Kbps) transmission and support for sending and receiving data as either a master or a slave
Controller Area Network (CAN) Interface using CAN protocol version 2.0 part A/B and with bit rates up to 1 Mbps
Two integrated analog comparators configurable for output to initiate an ADC sample sequence, drive an output pin or generate an interrupt
Three PWM generator blocks, each with one 16-bit counter, two PWM comparators, a PWM signal generator, a dead-band generator, and an interrupt/ADC-trigger selector; one PWM fault inputs to promote low-latency shutdown
Quadrature Encoder Interface (QEI) featuring position integrator to track encoder position and velocity capture using built-in timer
Industrial-range 64-pin RoHS-compliant LQFP package
Application
- The LM3S2616-IQR50-A0 microcontroller can be used in a wide range of applications, including but not limited to:
- Industrial automation
- Consumer electronics
- Automotive systems
- Home appliances
- Medical devices
- Internet of Things (IoT) devices
- Robotics
- Energy management systems
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Product Name | LM3S2616-IQR50-A0 | Product Type | Microcontroller |
Manufacturer | Texas Instruments | Core Processor | ARM Cortex-M3 |
Core Size | 32-Bit | Speed | 50MHz |
Connectivity | CAN, Ethernet, I²C, SPI, USB, UART/USART | Peripherals | DMA, PWM, WDT |
Number of I/Os | 26 | Program Memory Size | 256KB (256K x 8) |
Data RAM Size | 32KB | Voltage - Supply | 3 V ~ 3.6 V |
Operating Temperature | -40°C ~ 105°C | Mounting Type | Surface Mount |
Package / Case | 64-LQFP | Product Category | ARM Microcontrollers - MCU |
RoHS | Details | Series | LM3S2616 |
Mounting Style | SMD/SMT | Core | ARM Cortex M3 |
Data Bus Width | 32 bit | ADC Resolution | 10 bit |
Maximum Clock Frequency | 50 MHz | Supply Voltage - Min | 2.25 V |
Supply Voltage - Max | 2.75 V | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Analog Supply Voltage | 3.3 V |
Brand | Texas Instruments | Height | 1.4 mm |
I/O Voltage | 3.3 V | Interface Type | CAN, I2C, SPI, SSI, UART |
Length | 10 mm | Moisture Sensitive | Yes |
Number of ADC Channels | 6 Channel | Number of Timers/Counters | 6 Timer |
Processor Series | Stellaris | Product | MCUs |
Program Memory Type | Flash | Factory Pack Quantity | 160 |
Subcategory | Microcontrollers - MCU | Tradename | Stelaris |
Width | 10 mm |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Pièces équivalentes
Pour le LM3S2616-IQR50-A0 composant, vous pouvez envisager ces pièces de rechange et alternatives:
Numéro d'article
Marques
Emballer
Description
Numéro d'article : LM3S2616-IQR50-A0
Marques :
Emballer : 64-LQFP (10x10)
Description : There are no direct equivalent parts to the LM3S2616-IQR50-A0 as it is a unique model from Texas Instruments. However, other microcontrollers from different manufacturers, such as Microchip and Atmel, may offer similar features and capabilities.
Points de pièce
-
The LM3S2616-IQR50-A0 is a low-power microcontroller chip from Texas Instruments, part of the Stellaris family. It features a Cortex-M3 core, 256 KB flash memory, 32 KB RAM, and various peripherals for industrial automation, motor control, and other applications. This chip is ideal for embedded systems requiring high performance and low power consumption.
-
Equivalent
The equivalent products of the LM3S2616-IQR50-A0 chip are the TM4C123GH6PM and TM4C1294NCPDT by Texas Instruments. These chips have similar features and functions, making them suitable replacements for the LM3S2616-IQR50-A0 in various applications. -
Features
The LM3S2616-IQR50-A0 is a microcontroller with a 50MHz ARM Cortex-M3 core, 64KB flash memory, 16KB RAM, 64 GPIO pins, 2 UART, 2 SPI, and 2 I2C interfaces. It also has an integrated ADC, PWM, USB, and Ethernet connectivity options, making it suitable for a variety of embedded applications. -
Pinout
The LM3S2616-IQR50-A0 is a 64-pin microcontroller with functions including ARM Cortex-M3 core, 256KB Flash memory, 64KB RAM, and various communication interfaces. It is used for industrial control, remote monitoring, and data acquisition applications. -
Manufacturer
The manufacturer of LM3S2616-IQR50-A0 is Texas Instruments Incorporated. It is an American technology company that designs and manufactures semiconductors and various integrated circuits for a wide range of electronic devices, including microcontrollers, digital signal processors, and analog ICs. -
Application Field
The LM3S2616-IQR50-A0 is commonly used in industrial control systems, automation, Internet of Things (IoT) devices, and embedded network applications. It is suitable for projects that require low power consumption, real-time processing, and connectivity features such as Ethernet and USB. -
Package
The LM3S2616-IQR50-A0 chip comes in a QFP package, with 64 pins. It is in a surface mount form and has a size of 10mm x 10mm.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits