ST M24C01-WMN6TP
EEPROM EEPROM S I2C 1K
Marques: STMicroelectronics, Inc
Pièce Fabricant #: M24C01-WMN6TP
Fiche de données: M24C01-WMN6TP Datasheet (PDF)
Colis/Caisse: SOIC-8
Statut RoHS:
État des stocks: 3727 pièces, nouveau original
type de produit: Mémoire
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Tous les prix sont en USD
Qté | Prix unitaire | Prix ext |
---|---|---|
5 | $0,179 | $0,895 |
50 | $0,147 | $7,350 |
150 | $0,135 | $20,250 |
500 | $0,117 | $58,500 |
2500 | $0,111 | $277,500 |
5000 | $0,106 | $530,000 |
In Stock:3727 PCS
M24C01-WMN6TP Description générale
The M24C01(C02) is a 1(2)-Kbit I2C-compatible EEPROM (electrically erasable programmable memory) organized as 128 (256) × 8 bits.The M24C01/02-W can be accessed with a supply voltage from 2.5 V to 5.5 V, the M24C01/02-R can be accessed with a supply voltage from 1.8 V to 5.5 V, and the M24C02-F can be accessed either with a supply voltage from 1.7 V to 5.5 V (over the full temperature range) or with an extended supply voltage from 1.6 V to 5.5 V under some restricted conditions. These devices operate with a maximum clock frequency of 400 kHz.
Caractéristiques
- Compatible with following I2C bus modes:
- 400 kHz
- 100 kHz
- Memory array:
- 1 Kbit (128 byte) of EEPROM
- 2 Kbit (256 byte) of EEPROM
- Page size: 16 byte
- Single supply voltage:
- M24C01/02-W: 2.5 V to 5.5 V
- M24C01/02-R: 1.8 V to 5.5 V
- M24C02-F:1.7 V to 5.5 V 1.6 V to 5.5 V (under temperature constraint)
- Write:
- Byte write within 5 ms
- Page write within 5 ms
- Operating temperature range:
- from -40 °C up to +85 °C
- Random and sequential read modes
- Write protect of the whole memory array
- Enhanced ESD/latch-Up protection
- More than 4 million write cycles
- More than 200-years data retention
- Compatible with following I2C bus modes:
- Packages
- SO8N (ECOPACK2)
- TSSOP8 (ECOPACK2)
- UFDFPN8 (ECOPACK2)
- UFDFPN5 (ECOPACK2)
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Pin Count | 8 | Package Category | Small Outline Packages |
Released Date | Aug 29, 2022 |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The M24C01-WMN6TP chip is a memory IC developed by STMicroelectronics. It is a 1 KB serial EEPROM (Electrically Erasable Programmable Read-Only Memory) that can store data without power. The chip communicates through an I2C (Inter-Integrated Circuit) interface and operates over a wide voltage range. It is commonly used in various electronic devices for non-volatile data storage and retrieval.
-
Equivalent
Some equivalent products of the M24C01-WMN6TP chip are the M24C01-RMN6TP, M24C01-BN6TP, and M24C01-FMN6TP chips. -
Features
M24C01-WMN6TP is a 1-kilobit I2C serial electrically erasable programmable read-only memory (EEPROM) chip. It operates with a wide voltage range from 2.5V to 5.5V and has a memory organization of 128 bytes (256 pages of 16 bytes each). It features a Write Protect pin and has a high-speed protocol with a maximum operating frequency of 400 kHz. -
Pinout
The M24C01-WMN6TP is a 1K bit serial electrically erasable programmable memory (EEPROM) with a 2-wire serial interface. It has 8 pins, consisting of VSS (ground), VCC (power supply), SDA (data input/output), SCL (clock input), WP (write protect), A0 (address input), A1 (address input), and NC (no connection). -
Manufacturer
The manufacturer of the M24C01-WMN6TP is STMicroelectronics. It is a global semiconductor company that designs, develops, manufactures, and markets a range of semiconductor solutions. STMicroelectronics operates in various segments, including automotive, industrial, personal electronics, and telecommunications markets, providing a wide range of products for various applications. -
Application Field
The M24C01-WMN6TP is a 1-Kbit serial I²C bus EEPROM (Electrically Erasable Programmable Read-Only Memory) chip. It can be used in various applications such as consumer electronics, industrial automation, medical devices, automotive systems, and smart meters. -
Package
The M24C01-WMN6TP chip comes in a package type of SO-8 (SMD). Its form is a Surface Mount Device (SMD), and the size of the chip is typically 4.4mm x 3mm x 1.25mm.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits
Our products are built to last with Ovaga's durable and long-lasting electronic components. Highly recommend!