Commandes de plus de
$5000MM74HC245AWM
Octal 3-STATE Transceiver
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Marques: Onsemi
Pièce Fabricant #: MM74HC245AWM
Fiche de données: MM74HC245AWM Fiche de données (PDF)
Colis/Caisse: SOIC-20W
type de produit: Buffers, Drivers, Receivers, Transceivers
Statut RoHS:
État des stocks: 7 903 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
MM74HC245AWM Description générale
Boasting advanced silicon-gate CMOS technology, the MM74HC245A 3-STATE bidirectional buffer is purposefully designed for seamless two-way asynchronous communication between data buses. Its high drive current outputs facilitate high speed operation, even when driving large bus capacitances, making it a reliable and efficient choice. With low power consumption and high noise immunity, this device aligns with the best attributes of CMOS circuitry, while delivering speeds comparable to low power Schottky TTL circuits. The active LOW enable input G# and direction control input, DIR, allow for precise control over the flow of data, ensuring seamless and reliable communication. Capable of driving up to 15 LS-TTL Loads and featuring protected inputs, the MM74HC245A is a secure and dependable solution for bidirectional data transfer
Caractéristiques
- High input impedance: 1 MΩ typical
- Wide operating temperature range: -40°C to 125°C
- Low noise and distortion: 0.2 mV typical
Application
- High performance for any task.
- Trustworthy and efficient product.
- Meets various application requirements.
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Status | Active | Compliance | PbAHP |
Package Type | SOIC-20W | Case Outline | 751D-05 |
MSL Type | 3 | MSL Temp (°C) | 260 |
Container Type | TUBE | Container Qty. | 38 |
ON Target | N | Channels | 8 |
Output | 3-State | VCC Min (V) | 2 |
VCC Max (V) | 6 | tpd Max (ns) | 15 |
IO Max (mA) | 7.8 |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
![]() |
Virement bancaire | facturer des frais bancaires de 30,00 $ US. |
![]() |
Pay Pal | facturer des frais de service de 4,0 %. |
![]() |
Carte de crédit | facturez des frais de service de 3,5%. |
![]() |
Western union | charge US.00 banking fee. |
![]() |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The MM74HC245AWM chip is a bidirectional octal bus transceiver that provides non-inverting buffer function. It features 8-bit wide data lines with 3-state outputs, allowing for communication between buses of different voltage levels. This chip is commonly used in digital applications for signal conversion and isolation.
-
Equivalent
Some equivalent products of MM74HC245AWM chip are SN74HC245, CD74HC245, and MC74HC245. These chips are all octal bus transceivers that provide bidirectional voltage level translation between two separate systems. They have similar functionalities and are interchangeable in many applications. -
Features
The MM74HC245AWM is an octal bus transceiver designed to convert signals between TTL logic levels and CMOS levels. It features 3-state outputs, high-speed operation, and low power consumption. This device is ideal for applications requiring bidirectional data transfer between different logic levels. -
Pinout
The MM74HC245AWM is a Octal 3-STATE Non-Inverting Bus Transceiver with an eight-pin count. It is used to transfer data safely between buses of different voltage levels. It features an input-output voltage compatibility up to Vcc = 6V and typical propagation delay of 11 ns. -
Manufacturer
The MM74HC245AWM is manufactured by Fairchild Semiconductor, a company that specializes in the development and production of integrated circuits and other semiconductor components. Fairchild Semiconductor is known for its high-quality and reliable products in the electronics industry worldwide. -
Application Field
The MM74HC245AWM is a octal bus transceiver that is commonly used in various electronic systems including communication equipment, data transmission, networking, and industrial control systems. It is used to facilitate bidirectional data transfer between different parts of a circuit, ensuring smooth communication and signal continuity. -
Package
The MM74HC245AWM chip comes in a Surface Mount Package (SMD), specifically a SOIC-20 package. It has a Width of 7.5mm, Length of 12.8mm, and Thickness of 3.8mm.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits