Commandes de plus de
$5000
NCP1230P133G
AC to DC Switching Converter Off-Line Switcher 143kHz Tube 7-Pin PDIP
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Marques: onsemi
Pièce Fabricant #: NCP1230P133G
Fiche de données: NCP1230P133G Fiche de données (PDF)
Colis/Caisse: 8-DIP
Statut RoHS:
État des stocks: 8 781 pièces, nouveau original
type de produit: AC DC Converters, Offline Switches
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Tous les prix sont en USD
Qté | Prix unitaire | Prix ext |
---|---|---|
1 | $0,490 | $0,490 |
200 | $0,190 | $38,000 |
500 | $0,183 | $91,500 |
1000 | $0,180 | $180,000 |
En stock: 8 781 PC
NCP1230P133G Description générale
The NCP1230 represents a major leap towards achieving low standby power in medium-to-high power Switched-Mode Power Supplies such as notebook adapters, off-line battery chargers and consumer electronics equipment. Housed in a compact 8-pin package (SO-8 or PDIP-7), the NCP1230 contains all needed control functionality to build a rugged and efficient power supply. The NCP1230 is a current mode controller with internal ramp compensation. Among the unique features offered by the NCP1230 is an event management scheme that can disable the front-end PFC circuit during standby, thus reducing the no load power consumption. The NCP1230 itself goes into cycle skipping at light loads while limiting peak current (to 25% of nominal peak) so that no acoustic noise is generated. The NCP1230 has a high-voltage start-up circuit that eliminates external components and reduces power consumption. The NCP1230 also features an internal latching function that can be used for OVP protection. This latch is triggered by pulling the CS pin above 3.0 V and can only be reset by pulling VCC to ground. True overload protection, internal 2.5 ms soft start, internal leading edge blanking, internal frequency dithering for low EMI are some of the other important features offered by the NCP1230.
Caractéristiques
- Current−Mode Operation with Internal Ramp Compensation
- Internal High−Voltage Start−Up Current Source for Loss Less Start−Up
- Extremely Low No−Load Standby Power
- Skip−Cycle Capability at Low Peak Currents
- Direct Connection to PFC Controller for Improved No−Load Standby Power
- Internal 2.5 ms Soft Start
- Internal Leading Edge Blanking
- Latched Primary Overcurrent and Overvoltage Protection
- Short−Circuit Protection Independent of Auxiliary Level
- Internal Frequency Jittering for Improved EMI Signature
- +500 mA/−800 mA Peak Current Drive Capability
- Available in Three Frequency Options: 65 kHz, 100 kHz, and 133 kHz
- Direct Optocoupler Connection
- SPICE Models Available for TRANsient and AC Analysis
- Pb-Free Packages are Available
Application
- High Power AC/DC Adapters for Notebooks, etc.
- Offline Battery Chargers
- Flat TVs, DVD RW, Home Theatre, Set Top Boxes
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Mfr | onsemi | Series | - |
Package | Tube | Product Status | Active |
Output Isolation | Isolated | Internal Switch(s) | No |
Voltage - Breakdown | - | Topology | Flyback |
Voltage - Start Up | 12.6 V | Voltage - Supply (Vcc/Vdd) | 7.7V ~ 18V |
Duty Cycle | 80% | Frequency - Switching | 133kHz |
Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit | Control Features | - |
Operating Temperature | -40°C ~ 125°C (TJ) | Package / Case | 8-DIP (0.300", 7.62mm), 7 Leads |
Supplier Device Package | 7-PDIP | Mounting Type | Through Hole |
Base Product Number | NCP1230 |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
![]() |
Virement bancaire | facturer des frais bancaires de 30,00 $ US. |
![]() |
Pay Pal | facturer des frais de service de 4,0 %. |
![]() |
Carte de crédit | facturez des frais de service de 3,5%. |
![]() |
Western union | charge US.00 banking fee. |
![]() |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits