ADI OP27AZ
Precision Amplifiers LOW-NOISE PRECISION OP AM
Marques: Analog Devices, Inc
Pièce Fabricant #: OP27AZ
Fiche de données: OP27AZ Datasheet (PDF)
Colis/Caisse: CDIP-8
type de produit: CI d'amplificateur
Statut RoHS:
État des stocks: 3242 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureOP27AZ Description générale
The OP279 is a dual rail-to-rail, high output current, single supply amplifier.It is designed for low voltage applications that require either current or capacitive load drive capability.The OP279 can sink and source currents of ±80 mA (typ) and is stable with capacitive loads to 10 nF.
Applications with the benefit from the OP279's high output current include driving headphones, displays, transformers, and power transistors. The powerful output is combined with a unique input stage that maintains very low distortion with wide common-mode range, even in single supply designs.
The OP279 can be used as a buffer to provide much greater drive capability than can usually be provided by CMOS outputs.CMOS ASICs and DACs often have outputs that can swing to both the positive supply and ground, but are incapable of driving greater than a few milliamps.
Bandwith is typically 5 MHz and the slew rate is 3 V/µs, making these amplifiers well suited for single supply applications that require audio bandwidths when used in high gain configurations.Operation is guaranteed from voltages as low as 4.5 V, up to 12 V.
When using the OP279 in +5 volt systems, very good audio performance can be attained.THD is below 0.01% with a 600 Ohm load, and noise is a respectable 21 nV/Hz.Supply current is less than 3.5 mA per amplifier.
The OP279 is available in 8-pin plastic DIP and SO-8 surface mount packages.They are specified over the industrial (-40°C to +80°C) temperature range.
Caractéristiques
- Rail-to-Rail Inputs and Outputs
- High Output Current: ±60 mA
- Single Supply: 5 V to 12 V
- Wide Bandwidth: 5 MHz
- High Slew Rate: 3 V/±s
- Low Distortion: 0.01%
- Unity-Gain Stable
- No Phase Reversal
- Short-Circuit Protected
- Drives Capacitive Loads: 10 nF
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Pin Count | 8 | Package Category | Dual-In-Line Packages |
Released Date | Jan 11, 2017 |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The OP27AZ is a precision operational amplifier integrated circuit that is commonly used in signal conditioning and amplification applications. It offers low input offset voltage, drift, and noise, making it ideal for high-accuracy measurement and sensor interface circuits. Its high open-loop gain and bandwidth make it suitable for a wide range of precision analog circuit designs.
-
Equivalent
Some equivalent products of the OP27AZ chip are AD827, LT1115, and OPA627. These operational amplifier chips offer similar performance characteristics and are commonly used as replacements for the OP27AZ in various applications. -
Features
The OP27AZ is a low-noise precision operational amplifier with high input impedance, low offset voltage, and low input bias current. It features low distortion, high gain bandwidth product, and wide supply voltage range. It is suitable for precision instrumentation, active filters, and precision integrators. -
Pinout
The OP27AZ is a high precision operational amplifier with a pin count of 8. Pin 1 is the offset null, pins 2 and 3 are the inverting input, pins 4 and 7 are the power supply, pin 5 is the non-inverting input, pin 6 is the output, and pin 8 is the offset null. -
Manufacturer
OP27AZ is manufactured by Analog Devices Inc., a multinational semiconductor company specializing in data conversion and signal processing technology. Analog Devices produces a wide range of integrated circuits for various applications including communication, industrial, automotive, and healthcare industries. -
Application Field
The OP27AZ is a precision operational amplifier commonly used in precision instrumentation, data acquisition systems, medical equipment, and audio equipment. It is also used in control systems, test equipment, and signal processing applications that require high accuracy and low noise performance. -
Package
The OP27AZ chip is packaged in a standard 8-pin plastic DIP (Dual Inline Package) form with a size of approximately 9.05mm x 6.13mm x 3.30mm.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits
The selection of components they offer is unrivaled. Always happy with my orders.