Commandes de plus de
$5000TI OPA657U
Voltage Feedback Amplifier 1 Circuit 8-SOIC
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Marques: ti
Pièce Fabricant #: OPA657U
Fiche de données: OPA657U Fiche de données (PDF)
Colis/Caisse: SOIC (D)-8
type de produit: Instrumentation, OP Amps, Buffer Amps
Statut RoHS:
État des stocks: 5 459 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
OPA657U Description générale
Photodiode applications can greatly benefit from the OPA657U's unique combination of a low-voltage noise JFET-input stage and high-gain bandwidth amplifier. The JFET input stage provides minimal current noise, while the low 4.8 nV/√Hz input voltage noise ensures exceptional input sensitivity for broadband applications. This amplifier's performance is further enhanced by its low input bias current and capacitance, allowing for reliable operation even with high source impedances
Caractéristiques
- Rugged and compact operational amplifier
- High-speed performance with low distortion
- Suitable for high-frequency applications
- Low noise figure with high common-mode rejection ratio
- Excellent linearity with fast settling time
- Precision and stability guaranteed
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Architecture | FET / CMOS Input, Voltage FB | Number of channels | 1 |
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) | 8 | Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) | 12 |
GBW (typ) (MHz) | 1600 | BW at Acl (MHz) | 350 |
Acl, min spec gain (V/V) | 7 | Slew rate (typ) (V/µs) | 700 |
Vn at flatband (typ) (nV√Hz) | 4.8 | Vn at 1 kHz (typ) (nV√Hz) | 7 |
Iq per channel (typ) (mA) | 14 | Vos (offset voltage at 25°C) (max) (mV) | 1.8 |
Rail-to-rail | No | Features | Decompensated |
Rating | Catalog | Operating temperature range (°C) | -40 to 85 |
CMRR (typ) (dB) | 89 | Input bias current (max) (pA) | 20 |
Offset drift (typ) (µV/°C) | 2 | Iout (typ) (mA) | 70 |
2nd harmonic (dBc) | 74 | 3rd harmonic (dBc) | 106 |
Frequency of harmonic distortion measurement (MHz) | 5 |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
![]() |
Virement bancaire | facturer des frais bancaires de 30,00 $ US. |
![]() |
Pay Pal | facturer des frais de service de 4,0 %. |
![]() |
Carte de crédit | facturez des frais de service de 3,5%. |
![]() |
Western union | charge US.00 banking fee. |
![]() |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The OPA657U is a high-speed operational amplifier (op-amp) chip manufactured by Texas Instruments. It is designed for applications requiring fast slew rate and wide bandwidth, making it suitable for use in high-speed data acquisition systems, buffering, and voltage-controlled amplifiers. The OPA657U offers low distortion, high output current drive, and is suitable for precision applications.
-
Equivalent
The equivalent products of the OPA657U chip are the OPA657N, OPA656N, and OPA858. These chips are high-speed, ultra-low distortion operational amplifiers designed for high-speed signal conditioning, precision data acquisition, and high-performance audio applications. -
Features
The OPA657U is a high-speed, ultra-low distortion operational amplifier with a bandwidth of 1.5GHz, a slew rate of 3125V/µs, and a low input offset voltage of 0.5mV, making it ideal for high-frequency and high-precision applications. It features a low input bias current of 250nA and a wide supply voltage range of ±2.25V to ±18V. -
Pinout
The OPA657U is a high-speed operational amplifier with a pin count of 8. It is commonly used for high-performance applications, such as in audio equipment or high-frequency signal processing. The pin functions include power supply inputs, signal inputs, and output pins. -
Manufacturer
The manufacturer of OPA657U is Texas Instruments. Texas Instruments is an American technology company that designs and manufactures semiconductors and integrated circuits for a variety of applications, including analog and digital signal processing, power management, and microcontrollers. -
Application Field
OPA657U is a high-speed, ultra-low noise amplifier commonly used in applications such as high-speed communications, test and measurement equipment, and medical imaging devices. It is also used in precision instrumentation, radar systems, and audio equipment where high bandwidth and low noise are crucial requirements. -
Package
The OPA657U is a microcircuit (chip) in a SOIC-8 surface mount package. It has a rectangular form with dimensions of 5.3mm x 4.4mm, and a thickness of 1.75mm. This chip is designed for high-speed, wideband operation in various electronic applications.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits