ON PCA9655EMTTXG
I/O Expander 16 I2C, SMBus 100 kHz 24-QFN (4x4)
Marques: ON Semiconductor, LLC
Pièce Fabricant #: PCA9655EMTTXG
Fiche de données: PCA9655EMTTXG Datasheet (PDF)
Colis/Caisse: QFN-24
type de produit: CI d'interface
Statut RoHS:
État des stocks: 2757 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclaturePCA9655EMTTXG Description générale
The PCA9655E provides 16 bits of General Purpose parallel Input and Output (GPIO) expansion through the I2C-bus and SMBus. The PCA9655E consists of two 8-bit Configuration (Input or Output selection); Input, Output and Polarity Inversion (active-HIGH) or active-LOW operation) registers. At power on, all IOs default to inputs. Each IO may be configured as either input or output by writing to its corresponding IO configuration bit. The data for each Input or Output is kept in its corresponding Input or Output register. The Polarity Inversion register may be used to invert the Polarity if the read register. All registers can be read by the system master. The PCA9655E provides an open-drain interrupt output which is activated when any input state differs from its corresponding input port register state. The interrupt output is used to indicate to the system master that an input state has changed. The power-on reste sets the registers to their default values and initializes the device state machine. Three hardware pins (AD0, AD1, AD2) are used to configure the I2C-bus slave address of the device. Up to 64 devices are allowed to share the same I2C-bus and SMBus.
Caractéristiques
- VCC Operating Range: 1.65 V to 5.5 V
- SDA Sink Capability: 30 mA
- 5.5 V Tolerant I/Os
- Polarity Inversion Register
- Active LOW Interrupt Output
- Low Standby Current
- Noise Filter on SCL/SDA Inputs
- No Glitch on Powerup
- Internal Poweron Reset
- 64 Programmable Slave Addresses Using Three Address Pins
- 16 I/O Pins Which Default to 16 Inputs
- I2C SCL Clock Frequencies Supported:Standard Mode: 100 kHz/Fast Mode: 400 kHz/Fast Mode +: 1 MHz
- ESD Performance: 2000 V Human Body Model,200 V Machine Model
Application
- Input/output Port Expansion for Extended Addressing Capability
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Source Content uid | PCA9655EMTTXG | Pbfree Code | Yes |
Part Life Cycle Code | Active | Ihs Manufacturer | ONSEMI |
Part Package Code | WQFN24 4x4, 0.5P | Package Description | QFN-24 |
Pin Count | 24 | Manufacturer Package Code | 485BG |
Reach Compliance Code | compliant | HTS Code | 8542.39.00.01 |
Factory Lead Time | 76 Weeks | Samacsys Manufacturer | onsemi |
Interface IC Type | INTERFACE CIRCUIT | JESD-30 Code | S-PDSO-N24 |
Moisture Sensitivity Level | 1 | Number of Functions | 1 |
Number of Terminals | 24 | Package Body Material | PLASTIC/EPOXY |
Package Code | HVQCCN | Package Shape | SQUARE |
Package Style | SMALL OUTLINE | Peak Reflow Temperature (Cel) | 260 |
Surface Mount | YES | Temperature Grade | MILITARY |
Terminal Finish | MATTE TIN | Terminal Form | NO LEAD |
Terminal Position | DUAL | Time@Peak Reflow Temperature-Max (s) | 30 |
feature-maximum-operating-supply-voltage-v | 5.5 | feature-process-technology | |
feature-minimum-operating-supply-voltage-v | 1.65 | feature-packaging | Tape and Reel |
feature-rad-hard | feature-pin-count | 24 | |
feature-supplier-package | WQFN EP | feature-standard-package-name1 | |
feature-cecc-qualified | No | feature-esd-protection | Yes |
feature-military | No | feature-aec-qualified | No |
feature-aec-qualified-number | feature-auto-motive | No | |
feature-p-pap | No | feature-eccn-code | EAR99 |
feature-svhc | No |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
PCA9655EMTTXG chip is a 16-bit I/O expander with I2C interface. It allows the user to add additional I/O pins to a microcontroller using only two wires. The chip can be used in various applications, such as LED control, keypads, and general-purpose digital I/O expansion. It provides an efficient and convenient way to increase the number of I/O pins without using multiple microcontroller pins.
-
Features
The PCA9655EMTTXG is a 16-bit I2C-bus LED dimmer with programmable register settings, designed to control LED brightness in automotive lighting applications. It offers a wide voltage range of 4.5V to 5.5V, high current capability, low standby current, and compatibility with different LED types. Additionally, it provides fault detection and protection features for safe operation. -
Pinout
The PCA9655EMTTXG is an I/O expander with 24-bit bidirectional I/O ports and interrupt output. It has a 56-pin count with functions such as I/O pins, interrupt output, power supply, and ground connections. -
Manufacturer
The manufacturer of the PCA9655EMTTXG is NXP Semiconductors. It is a large multinational semiconductor company focused on providing secure connectivity and embedded processing solutions for various industries, including automotive, industrial, and Internet of Things (IoT) applications. -
Application Field
The PCA9655EMTTXG is a motorized potentiometer manufactured by NXP Semiconductors. It is commonly used in applications that require precise control and adjustment of analog signals, such as audio amplifiers, telecommunications equipment, and automotive electronics. -
Package
The PCA9655EMTTXG chip comes in the EMT package type, has a form factor of MTT, and has a compact size.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits
I found Ovaga's electronic components to be of reliable quality and reasonably priced.