Commandes de plus de
$5000Microchip PIC24FJ1024GB606T-I/MR
High-performance microcontroller for advanced applications and complex design
Marques: Microchip Technology, Inc
Pièce Fabricant #: PIC24FJ1024GB606T-I/MR
Fiche de données: PIC24FJ1024GB606T-I/MR Fiche de données (PDF)
Colis/Caisse: QFN-64
Statut RoHS:
État des stocks: 2 593 pièces, nouveau original
type de produit: Microcontrollers
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Tous les prix sont en USD
Qté | Prix unitaire | Prix ext |
---|---|---|
1 | $5,493 | $5,493 |
200 | $2,127 | $425,400 |
500 | $2,051 | $1025,500 |
1000 | $2,015 | $2015,000 |
En stock: 2 593 PC
PIC24FJ1024GB606T-I/MR Description générale
One of its key features is the dual-partition Flash with Live Update capability, which allows for simultaneous programming of one partition while executing application code from the other. This feature provides flexibility and efficiency in firmware updates. Moreover, the ability to perform over-the-air firmware updates adds a level of convenience and cost-effectiveness for designers and engineers
Caractéristiques
- CPU
- Modified Harvard Architecture
- Up to 16 MIPS Operation @ 32 MHz
- 8 MHz Internal Oscillator:
- 96 MHz PLL option
- Multiple clock divide options
- Run-time self-calibration capability for maintaining better than ±0.20% accuracy
- Fast start-up
- 17-Bit x 17-Bit Single-Cycle Hardware Fractional/Integer Multiplier
- 32-Bit by 16-Bit Hardware Divider
- 16 x 16-Bit Working Register Array
- C Compiler Optimized Instruction Set Architecture
- Two Address Generation Units for Separate Read and Write Addressing of Data Memory
- Live Update
- Dual Partition Flash with Live Update Capability
- Capable of Holding Two Independent Software Applications, including Bootloader
- Permits Simultaneous Programming of One Partition while Executing Application Code from the Other
- Allows Run-Time Switching Between Active Partitions
- Low-Power Features
- Sleep and Idle modes Selectively Shut Down Peripherals and/or Core for Substantial Power Reduction and Fast Wake-up
- Doze mode Allows CPU to Run at a Lower Clock Speed than Peripherals
- Alternate Clock modes Allow On-the-Fly Switching to a Lower Clock Speed for Selective Power Reduction
- Universal Serial Bus (USB) Features
- USB v2.0 On-The-Go (OTG) Compliant
- USB Device mode Operation from FRC Oscillator – No Crystal Oscillator Required
- Low-Speed (1.5 Mb/s) and Full-Speed (12 Mb/s) USB Operation in Host mode
- Supports up to 32 Endpoints (16 bidirectional)
- Supports Control, Interrupt, Isochronous and Bulk Transfers
- On-Chip Pull-up and Pull-Down Resistors
- Analog Features
- 10/12-Bit, up to 24-Channel Analog-to-Digital (A/D) Converter:
- 12-bit conversion rate of 200 ksps
- Auto-scan and threshold compare features
- Conversion available during Sleep
- Three Rail-to-Rail, Enhanced Analog Comparators with Programmable Input/Output Configuration
- Charge Time Measurement Unit (CTMU):
- Used for capacitive touch sensing, up to 24 channels
- Time measurement down to 100 ps resolution
- Peripheral Features
- Peripheral Pin Select (PPS) –Allows Independent I/O Mapping of Many Peripherals
- Eight-Channel DMA Supports All Peripheral modules
- Six Input Capture modules, Each with a Dedicated 16-Bit Timer
- Six Output Compare/PWM modules, Each with a Dedicated 16-Bit Timer
- Four Single Output CCPs (SCCPs) and Three Multiple Output CCPs (MCCPs)
- Enhanced Parallel Master/Slave Port (EPMP/EPSP)
- Hardware Real-Time Clock/Calendar (RTCC) with Timestamping
- Programmable 32-Bit Cyclic Redundancy Check (CRC) Generator
- Four Configurable Logic Cells (CLCs)
- 5.5V Tolerant Inputs on Multiple I/O Pins
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Manufacturer: | Microchip | Product Category: | 16-bit Microcontrollers - MCU |
RoHS: | Y | Mounting Style: | SMD/SMT |
Package / Case: | QFN-64 | Core: | PIC24F |
Data Bus Width: | 16 bit | Maximum Clock Frequency: | 32 MHz |
Program Memory Size: | 1 MB | Data RAM Size: | 32 kB |
ADC Resolution: | 10 bit/12 bit | Number of I/Os: | 53 I/O |
Operating Supply Voltage: | 2 V to 3.6 V | Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 85 C | Series: | PIC24FJxxxGB606 |
Packaging: | Reel | Product: | USB MCU |
Program Memory Type: | Flash | Brand: | Microchip Technology |
Data RAM Type: | SRAM | Data ROM Size: | - |
Interface Type: | I2C, SPI, JTAG, UART, USB | I/O Voltage: | 5.5 V |
Number of ADC Channels: | 16 Channel | Number of Timers/Counters: | 5 x 16 bit, 2 x 32 bit |
Processor Series: | PIC24F | Product Type: | 16-bit Microcontrollers - MCU |
Factory Pack Quantity: | 3300 | Subcategory: | Microcontrollers - MCU |
Supply Voltage - Max: | 3.6 V | Supply Voltage - Min: | 2 V |
Tradename: | PIC | Watchdog Timers: | Watchdog Timer |
Tags | PIC24FJ1024GB60, PIC24FJ1024GB, PIC24FJ10, PIC24FJ1, PIC24FJ, PIC24F, PIC24, PIC2, PIC |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits