Commandes de plus de
$5000PIC24FJ128GL306-I/MR
Advanced microprocessor offering powerful processing capabilities in a small footprint
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Marques: Microchip
Pièce Fabricant #: PIC24FJ128GL306-I/MR
Fiche de données: PIC24FJ128GL306-I/MR Fiche de données (PDF)
Colis/Caisse: QFN-64
type de produit: Microcontrollers
Statut RoHS:
État des stocks: 4 598 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
PIC24FJ128GL306-I/MR Description générale
The PIC24FJ128GL306-I/MR microcontroller is a powerhouse of efficiency and innovation. Packed with core independent peripherals (CIPs), this family of low power microcontrollers offers an unparalleled level of functionality for your embedded applications. Its segmented LCD driver extends the capabilities of core independent animation, providing a versatile solution for a wide range of projects
Caractéristiques
- Segmented LCD Controller with Animation
- Up to 256 segments (8x commons and 32x segments)
- Core independent autonomous animation: Alternating dual display, blinking and blanking
- LCD Charge Pump for contrast management in battery-powered applications
- External bias option for reducing power consumption
- Operation in power-saving modes
- Core and Operating Conditions
- 2.0V to 3.6V, -40°C to 125°C, up to 16 MIPS operation
- Single-cycle instruction execution
- 16 x 16 Hardware Multiply, and 32-bit x 16-bit Hardware Divider
- C compiler optimized instruction set system
- AEC Q100 Grade 1 qualification
- eXtreme Low Power
- Ultra-low-power operation with sleep current down to nA with full RAM retention
- A range of power-saving modes to reduce current consumption, while balancing performance: PMD bits, DOZE, Idle, Sleep and Retention Sleep modes
- A range of Core Independent Peripherals (CIPs) that operate in power saving modes, while off-loading the Central Processing Unit (CPU)
- Secure Protection Features
- Flash ‘One Time Programming’ (OTP) by ICSP™ Write Inhibit that offers an ability to disable Flash erase/write/debug operations
- CodeGuard™ Flash protection to manage memory partitions and access restrictions
- 120-bit Unique Device ID, 256 bytes User OTP and the above protection schemes make an ideal combination of complementary features to implement security together with the CryptoAuthentication™ devices in a secure application
- Hardware Safety Features
- Flash with Error Correction Code (ECC) and Fault Injection for memory integrity check (Single error correction and Double error detection)
- Dead-Man Timer (DMT) clocked by instruction fetches for monitoring the health of software
- Windowed WatchDog Timer (WWDT) for system supervision
- CodeGuard™ Flash protection for memory partition and access restriction
- Fail-Safe Clock Monitor (FSCM) for clock fault management
- Enhanced Programmable Cyclic Redundancy Check (CRC), Programmable High-Low Voltage Detect (HLVD), Brown-out Reset (BOR) and Power-on Reset (POR)
- Class B Safety Library, IEC 60730
- Advanced Integrated Analog
- Up to 17-Channel, 400Ksps, 10/12-Bit Analog-to-Digital Converter (ADC)
- Low-voltage boost for input
- Bandgap reference input feature
- Core Independent windowed threshold compare feature
- Auto-scan feature
- Operation in power-saving modes
- Three Analog Comparators with input multiplexing and programmable reference voltage generators
- Timer/Counters/Output Compare/Input Capture/Pulse Width Modulation
- 5x 16-bit or 2x 32-bit dedicated timer/counters
- 14x PWM or Output Compare (OC) outputs with 5 independent timer bases – Multiple Capture Compare PWM (MCCP)
- 5x Input Captures (IC) – Multiple Capture Compare PWM (MCCP)
- A total of 15x 16-bit or 7x 32-bit timer/counters
- Hardware Real-Time Clock Calendar (RTCC) with Timestamping
- Core Independent Peripherals
- 4x Configurable Logic Cells (CLCs)
- 5x Multiple Capture Compare PWMs (MCCPs)
- Segmented LCD controller with Core Independent Animation, up to 256 segments (8 commons x 32 segments)
- ADC controller with threshold compare and automatic triggers
- Direct Memory Access (DMA) with 6 channels, supporting UART, SPI, ADC, and more
- Communication Interfaces
- 4x UARTs supporting LIN/J2602 and IrDA®
- 2x SPI/I2S, up to 25 MHz operation
- 2x I2C Master and Slave w/Address Masking, PMBus™ and IPMI support
- Clock Management
- On-chip 8 MHz Fast RC (FRC), and 32 kHz Low-Power RC (LPRC) and Secondary (SOSC) oscillators
- Programmable PLL with external oscillator clock sources and Reference Clock Output (REFO)
- Fail-Safe Clock Monitor (FSCM)
- Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) supporting two-speed start-up
- Special Features and Debugger Development Support
- MPLAB Code Configurator (MCC) support
- Peripheral Pin Select (PPS) for flexible pin mapping
- Configurable interrupt-on change on all IOs
- In-Circuit Serial Programming™ (ICSP™) and In-Circuit Emulation (ICE) via 2-pins
- JTAG Boundary Scan Support
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
CPU Type | 16-bit PIC MCU | CPU Speed (MHz) | 16 |
Program Memory Size (KB) | 128 | Multiple Flash Panels | No |
Direct Memory Access (DMA) Channels | 6 | Temp. Range Min.(C°) | -40 |
Temp. Range Max.(C°) | 125 | Operation Voltage Min.(V) | 2 |
Operation Voltage Max.(V) | 3.6 | Pin Count | 64 |
Low Power | Yes | Number of Comparators | 3 |
Number of ADCs | 1 | ADC Channels | 17 |
Max ADC Resolution (bits) | 12 | Max ADC Sampling Rate (ksps) | 400 |
Number of DACs | 0 | DAC outputs | 0 |
Max DAC Resolution (bits) | 0 | Hardware RTCC | Yes |
Motor Control PWM Channels | 0 | SMPS PWM Channels | 0 |
Number of PWM Time Bases | 5 | Output Compare Channels | 5 |
USB Interface | None | Number of CAN Modules | 0 |
Type of CAN module | None | Crypto Engine | No |
Quadrature Encoder Interface (QEI) | 0 | Segment LCD | 256 |
LCD/Graphics Interface | No | Configurable Logic Cell Modules (CLC /CCL) | 4 |
Peripheral Pin Select (PPS)/Pin Muxing | Yes |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
![]() |
Virement bancaire | facturer des frais bancaires de 30,00 $ US. |
![]() |
Pay Pal | facturer des frais de service de 4,0 %. |
![]() |
Carte de crédit | facturez des frais de service de 3,5%. |
![]() |
Western union | charge US.00 banking fee. |
![]() |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits