Les images sont à titre de référence uniquement. Voir les spécifications du produit
Microchip PIC24FJ256GB110-I/PF
16-bit Microcontrollers - MCU 16B 16MIPS 256KB I/O RAM84 OTG
Marques: Microchip Technology, Inc
Pièce Fabricant #: PIC24FJ256GB110-I/PF
Fiche de données: PIC24FJ256GB110-I/PF Datasheet (PDF)
Colis/Caisse: TQFP-100
type de produit: Processeurs et contrôleurs intégrés
Statut RoHS:
État des stocks: 2343 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclaturePIC24FJ256GB110-I/PF Description générale
Ideal for low power (<100nA standby current) and connectivity applications that benefit from the availability of multiple serial ports (3xI2C, 3xSPI), 4xUARTS, and 23 independent timers. Large amounts of RAM (16kB) memory for buffering and large (up to 256kB) Enhanced Flash program memory make it ideal for embedded control and monitoring applications. PPS (peripheral pin select) aids in configuring the most efficient pin configuration of available I/O, and CTMU provides touch support for up to 64 individual buttons. Supports USB 2.0 for device, Host, and OTG with a complete and free software stack that includes a thumb drive application stack.Available in 64, 80, and 100 pin packages.
USB Application Design Center
Caractéristiques
- Universal Serial Bus Features
- USB v2.0 On-the-Go compliant
- Dual role capable, can act as either Host or Device
- Low speed(1.5Mb/s) and full speed(12 Mb/s) operation in host mode
- Full speed USB operation in Device mode
- Supports 32 endpoints
- On-chip USB transceiver
- CPU
- Up to 16 MIPS performance
- 16 x 16 Hardware Multiply, Single Cycle Execution
- 12-bit x 16-bit Hardware Divider
- C Compiler Optimized Instruction Set
- Low Power nanoWatt
- Run, Idle and Sleep modes
- Multiple, Switchable Clock Modes for Optimum Performance and Power Management
- Run mode: 1 mA/MIPS, 2.0V Typical
- Sleep mode Current Down to 100 nA Typical
- Standby Current with 32 kHz Oscillator:2.5 uA,2.0V typical
- Flash Program Memory
- Self-Reprogrammable under Software Control
- 10,000 erase/write cycles
- 20 year data retention
- EEprom emulation capable
- System
- Internal oscillator support - 31 kHz to 8 MHz, up to 32 MHz with 4X PLL
- On-chip LDO Voltage Regulator
- JTAG Boundary Scan and Flash Memory Program Support
- Fail-Safe Clock Monitor – allows safe shutdown if clock fails
- Watchdog Timer with separate RC oscillator
- Analog Features
- 10-bit ADC, 16 channels, 500k samples per second
- Three Analog comparators
- Peripherals
- CTMU supports Capacitive Touch applications
- Peripheral Pin Select allows I/O remapping of many peripherals in real time
- 4xUART Modules with LIN and IrDA support, 4 Deep FIFO
- 3xSPI ™ Modules with 8 Deep FIFO
- 3xI2C™ Modules with Master and Slave Modes
- Five 16-bit Timer Modules
- Up to 9 Input Capture and 9 Output Compare/PWM with dedicated time base
- Hardware RTCC, Real-Time Clock Calendar with Alarms
- PMP, Parallel Master Port, with 16 Address Lines, and 8/16-bit Data
Application
- The PIC24FJ256GB110-I/PF microcontroller is commonly used in a wide range of embedded systems and applications such as:
- Industrial control systems
- Medical devices
- Consumer electronics
- Automotive applications
- Home automation
- Internet of Things (IoT) devices
- Sensor interfacing and data acquisition
- Motor control
- Human Machine Interface (HMI)
- Gaming systems
- Security systems and access control
Caractéristiques
| Paramètre | Valeur | Paramètre | Valeur |
|---|---|---|---|
| Product Name | PIC24FJ256GB110-I/PF | Product Type | Microcontroller |
| Manufacturer | Microchip | Series | PIC24 Family |
| Core Processor | dsPIC33 | Core Size | 16-Bit |
| Speed | 40MHz | Connectivity | I²C, SPI, UART/USART |
| Peripherals | DMA, POR, PWM, WDT | Number of I/Os | 82 |
| Program Memory Size | 256KB | Data RAM Size | 16KB |
| Voltage - Supply | 2.2 V ~ 3.6 V | Operating Temperature | -40°C ~ 85°C |
| Mounting Type | Surface Mount |
Expédition
| Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
| Modalités de paiement | Frais de main | |
|---|---|---|
 |
Virement bancaire | facturer des frais bancaires de 30,00 $ US. |
 |
Pay Pal | facturer des frais de service de 4,0 %. |
 |
Carte de crédit | facturez des frais de service de 3,5%. |
 |
Western union | charge US.00 banking fee. |
 |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
![Produit]( "Produit")
Étape1 :Produit
-
![Emballage sous vide]( "Emballage sous vide")
Étape2 :Emballage sous vide
-
![Sac antistatique]( "Sac antistatique")
Étape3 :Sac antistatique
-
![Emballage individuel]( "Emballage individuel")
Étape4 :Emballage individuel
-
![Boîtes d'emballage]( "Boîtes d'emballage")
Étape5 :Boîtes d'emballage
-
![étiquette d'expédition à code-barres]( "étiquette d'expédition à code-barres")
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Pièces équivalentes
Pour le PIC24FJ256GB110-I/PF composant, vous pouvez envisager ces pièces de rechange et alternatives:
Numéro d'article
Marques
Emballer
Description
Numéro d'article : PIC24FJ256GB110-I/PF
Marques :
Emballer : TQFP-100
Description : There are no exact equivalent parts for the PIC24FJ256GB110-I/PF as it is a specific Microchip product. However, other microcontrollers from the PIC24F series may have similar features and capabilities. It is recommended to refer to the official Microchip documentation and product selection guides to find the most suitable alternative for specific application requirements.
Points de pièce
-
The PIC24FJ256GB110-I/PF is a microcontroller chip developed by Microchip Technology. It belongs to the PIC24F family and has 256KB of flash memory. The chip offers an extensive range of peripherals and is widely used in various applications such as industrial control systems, consumer electronics, and medical devices. It provides enhanced performance, low power consumption, and advanced connectivity options.
-
Equivalent
Some equivalent products of the PIC24FJ256GB110-I/PF chip include PIC24FJ128GB110-I/PF, PIC24FJ192GB110-I/PF, and PIC24FJ512GB110-I/PF. -
Features
The PIC24FJ256GB110-I/PF is a microcontroller with 256KB of Flash memory, 16KB of RAM, and a 16-bit instruction set. It has a maximum operating frequency of 32 MHz and includes peripherals such as UART, SPI, I2C, and USB. It also supports 10-bit ADC, PWM, and various timers and interrupts for efficient control and communication. -
Pinout
The PIC24FJ256GB110-I/PF has a pin count of 100 pins. It is a microcontroller with a wide range of functions and features, including high performance, integrated peripherals, and extensive memory options. -
Manufacturer
Microchip Technology Inc. is the manufacturer of PIC24FJ256GB110-I/PF. It is an American company that specializes in designing and manufacturing microcontrollers, microprocessors, and other semiconductor products used in embedded systems. -
Application Field
The PIC24FJ256GB110-I/PF microcontroller can be used in a wide range of applications including motor control, industrial automation, medical devices, consumer electronics, security systems, and IoT devices. It offers high performance, low power consumption, and a rich set of peripherals, making it suitable for various embedded systems. -
Package
The PIC24FJ256GB110-I/PF chip is packaged in a 100-pin plastic TQFP (Thin Quad Flat Package) form. Its size and dimensions are usually in the range of 14x14 mm.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
![Produit]( "Produit")
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
![quantity]( "quantity")
La quantité minimum de commande commence à partir de 1 pièce.
-
![shipping]( "shipping")
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
![garantie]( "garantie")
Garantie de qualité de 365 jours pour tous les produits
Recommander
-
![PIC24FV32KA302-I/SO]()
-
![PIC24FJ64GA306-I/PT]()
-
![PIC24EP256GP204-I/PT]()
Microchip Technology, Inc
16-bit Microcontrollers - MCU 16B 256KB FL 32KBR 6...
-
![PIC24F32KA304-I/PT]()
-
![PIC24F32KA304-I/ML]()
-
![PIC24FJ128GA306-I/PT]()
ovaga excels in customer service! I received the PIC24FJ256GB110-I/PF components in perfect condition, thanks to their attention to detail and quick response to any queries I had.