Commandes de plus de
$5000TI SN74AVC1T45YZPR
Voltage Level Translator Bidirectional 1 Circuit 1 Channel 500Mbps 6-DSBGA
Marques: TI
Pièce Fabricant #: SN74AVC1T45YZPR
Fiche de données: SN74AVC1T45YZPR Fiche de données (PDF)
Colis/Caisse: DSBGA-6
type de produit: Translators, Level Shifters
Statut RoHS:
État des stocks: 3 000 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
SN74AVC1T45YZPR Description générale
This single-bit noninverting bus transceiver uses two separate configurable power-supply rails. The SN74AVC1T45 is optimized to operate with VCCA/VCCB set at 1.4 V to 3.6 V. It is operational with VCCA/VCCB as low as 1.2 V. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.2 V to 3.6 V. This allows for universal low-voltage, bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes.
The SN74AVC1T45 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied to prevent excess ICC and ICCZ.
The SN74AVC1T45 is designed so that the DIR input is powered by VCCA.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
The VCC isolation feature ensures that if either VCC input is at GND, then both ports are in the high-impedance state.
NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package.
Caractéristiques
- Available in the Texas Instruments NanoFree Package
- Fully Configurable Dual-Rail Design Allows Each Port to
Operate Over the Full 1.2-V to 3.6-V Power-Supply Range - VCC Isolation Feature - If Either VCC
Input Is At GND, Both Ports Are In The High-Impedance State - DIR Input Circuit Referenced to VCCA
- ±12-mA Output Drive at 3.3 V
- I/Os Are 4.6-V Tolerant
- Ioff Supports Partial-Power-Down Mode Operation
- Typical Max Data Rates
- 500 Mbps (1.8-V to 3.3-V Translation)
- 320 Mbps (<1.8-V to 3.3-V Translation)
- 320 Mbps (Translate to 2.5 V or 1.8 V)
- 280 Mbps (Translate to 1.5 V)
- 240 Mbps (Translate to 1.2 V)
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22
- ±2000-V Human Body Model (A114-A)
- 200-V Machine Model (A115-A)
- ±1000-V Charged-Device Model (C101)
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Technology family | AVC | Applications | GPIO |
Bits (#) | 1 | High input voltage (min) (V) | 0.78 |
High input voltage (max) (V) | 3.6 | Vout (min) (V) | 1.2 |
Vout (max) (V) | 3.6 | Data rate (max) (MBps) | 500 |
IOH (max) (mA) | -12 | IOL (max) (mA) | 12 |
Supply current (max) (µA) | 20 | Features | Output enable, Overvoltage tolerant inputs, Partial power down (Ioff) |
Input type | Standard CMOS | Output type | 3-State, Balanced CMOS, Push-Pull |
Rating | Catalog |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The SN74AVC1T45YZPR chip is a single-bit dual-supply voltage level translator designed for data transmission between devices operating at different voltage levels. It allows for bidirectional voltage translation by providing an output signal that is compatible with the target device's voltage level. This compact chip is commonly used in various applications, such as portable electronic devices, industrial systems, and automotive electronics.
-
Features
The SN74AVC1T45YZPR is a single-bit dual-supply translating transceiver with 3-state outputs. It has an operating voltage range of 1.65V to 5.5V, supports mixed-mode signal operation, and has I/O voltage level translation capability. It features integrated pull-up and pull-down resistors, and the output configuration can be modified to suit various applications. -
Pinout
The SN74AVC1T45YZPR is a single-bit dual supply voltage level translator with a 6-pin count. It can translate signals from one voltage level to another, allowing communication between devices operating at different voltage levels while ensuring signal integrity and preventing damage to the devices. -
Manufacturer
The manufacturer of the SN74AVC1T45YZPR is Texas Instruments. Texas Instruments is a multinational semiconductor company that develops and manufactures a wide range of integrated circuits and electronic components for various industries, including automotive, industrial, and consumer electronics. -
Application Field
The SN74AVC1T45YZPR is a voltage level translator and voltage level shifter, specifically designed for use in applications that require bidirectional voltage level translation between two voltage domains. It is commonly used in mobile phones, tablets, and other portable devices for data communication between different voltage domains, such as interfaces between microcontrollers, sensors, and peripherals. -
Package
The SN74AVC1T45YZPR chip has a package type of DSBGA, form of WSON, and size of 6-DSBGA (1.6x1.6 mm).
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits