Commandes de plus de
$5000ST STBLW35TTR
Ultra-low power and wide input dynamic buck-boost converter
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Marques: STMicroelectronics, Inc
Pièce Fabricant #: STBLW35TTR
Fiche de données: STBLW35TTR Fiche de données (PDF)
Colis/Caisse: VFQFPN 20
type de produit: Voltage Regulators , DC DC Switching Regulators
Statut RoHS:
État des stocks: 2 085 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
STBLW35TTR Description générale
The STBLW35 is an ultra-low power and high-efficiency buck-boost DC-DC converter which can work as boost or buck-boost according to the selected hardware configuration. When in buck-boost the DC-DC can seamlessly switch between the two working modes depending on operating conditions.The IC shows very low power losses either in active or disable mode and provides an average output current between 33 mA to 70 mA, suitable to guarantee load minimum current constraints or to faster charge a battery. The device also allows the charge of any battery by tightly monitoring the end-of-charge and the minimum battery voltage in order to avoid overdischarge and to preserve battery life.The power manager covers the input voltage range from 150 mV up to 18 V and guarantees high efficiency in both buck-boost and boost configuration.Furthermore, the STBLW35 device shows very high flexibility thanks also to the trimming capability of the overvoltage and the undervoltage protection voltages.In order to optimize the power consumption during system operation, the device can be driven in standby mode thanks to the high impedance Enable pin.An unregulated voltage output is available (to supply a transceiver for instance), while two fully independent LDOs are embedded for powering sensors and other companion chips. Both LDOs (1.8 V and 3.3 V) can be independently enabled through dedicated pins.
Caractéristiques
- Seamless transition from Buck-Boost to Boost and vice versa working mode
- Up to 70 mA output current
- Four fully integrated MOSFETs
- Enable pin
- 2.6 V to 5.3 V trimmable overvoltage level (± 1% accuracy)
- 2.2 V to 3.6 V trimmable undervoltage level (± 1% accuracy)
- Two fully independent LDOs (1.8 V and 3.3 V output)
- Enable/disable LDO control pins
- Load disconnect function at first switch-on
- Embedded pass transistor status and DC-DC status open drain indication pins
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
feature-type | Step Down|Step Up | feature-maximum-power-dissipation-mw | |
feature-packaging | Tape and Reel | feature-rad-hard | |
feature-pin-count | 20 | feature-supplier-package | VFQFPN EP |
feature-standard-package-name1 | feature-cecc-qualified | ||
feature-esd-protection | feature-escc-qualified | ||
feature-military | No | feature-aec-qualified | No |
feature-aec-qualified-number | feature-auto-motive | No | |
feature-p-pap | No | feature-eccn-code | EAR99 |
feature-svhc |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
![]() |
Virement bancaire | facturer des frais bancaires de 30,00 $ US. |
![]() |
Pay Pal | facturer des frais de service de 4,0 %. |
![]() |
Carte de crédit | facturez des frais de service de 3,5%. |
![]() |
Western union | charge US.00 banking fee. |
![]() |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits