ST STM32F103C4T6A
ARM Microcontrollers - MCU 32BIT Cortex M3 L/D PERF LINE 32KB
Marques: STMicroelectronics, Inc
Pièce Fabricant #: STM32F103C4T6A
Fiche de données: STM32F103C4T6A Datasheet (PDF)
Colis/Caisse: LQFP-48
type de produit: Processeurs et contrôleurs intégrés
Statut RoHS:
État des stocks: 2644 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureSTM32F103C4T6A Description générale
The STM32F103x4 and STM32F103x6 performance line family incorporates the high-performance ARM® Cortex™-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 32 Kbytes and SRAM up to 6 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.The STM32F103xx low-density performance line family operates from a 2.0 to 3.6 V power supply. It is available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F103xx low-density performance line family includes devices in four different package types: from 36 pins to 64 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.These features make the STM32F103xx low-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.Evaluation board with STM32F103Zx MCU.STM32 Nucleo-64 development board with STM32F103.ST-LINK/V2 in-circuit debugger/programmer for ST.
Caractéristiques
- ARM 32-bit Cortex™-M3 CPU Core
- 72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
- Single-cycle multiplication and hardware division
- Memories
- 16 or 32 Kbytes of Flash memory
- 6 or 10 Kbytes of SRAM
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR, and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC
- PLL for CPU clock
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- 2 x 12-bit, 1 μs A/D converters (up to 16 channels)
- Conversion range: 0 to 3.6 V
- Dual-sample and hold capability
- Temperature sensor
- DMA
- 7-channel DMA controller
- Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
- Up to 51 fast I/O ports
- 26/37/51 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- 6 timers
- Two 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- 16-bit, motor control PWM timer with dead-time generation and emergency stop
- 2 watchdog timers (Independent and Window)
- SysTick timer 24-bit downcounter
- 6 communication interfaces
- 1 x I2C interface (SMBus/PMBus)
- 2 × USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
- 1 × SPI (18 Mbit/s)
- CAN interface (2.0B Active)
- USB 2.0 full-speed interface
- CRC calculation unit, 96-bit unique ID
- Packages are ECOPACK®
Application
- The STM32F103C4T6A microcontroller is widely used in a variety of applications, including but not limited to:
- Industrial automation and control systems
- Home automation and smart appliances
- Automotive systems
- Medical devices
- Consumer electronics
- Internet of Things (IoT) devices
- Robotics and drones
- Power management systems
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Product Name | STM32F103C4T6A | Product Type | Microcontroller |
Manufacturer | STMicroelectronics | Series | STM32F1 Series |
Core Processor | ARM Cortex-M3 | Core Size | 32-Bit |
Speed | 72MHz | Connectivity | I²C, SPI, UART/USART |
Peripherals | ADC, DAC, DMA, RTC, Timers, USB | Number of I/Os | 37 |
Program Memory Size | 16KB | Data RAM Size | 6KB |
Voltage - Supply | 2.0 V ~ 3.6 V | Operating Temperature | -40°C ~ 85°C |
Mounting Type | Surface Mount |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Pièces équivalentes
Pour le STM32F103C4T6A composant, vous pouvez envisager ces pièces de rechange et alternatives:
Numéro d'article
Marques
Emballer
Description
Numéro d'article : STM32F103C4T6A
Marques :
Emballer : LQFP-48
Description : The STM32F103C4T6A is a specific part number from STMicroelectronics. It does not have direct equivalent parts from other manufacturers. However, there are other microcontrollers in the STM32F1 series that offer similar features and performance. Some examples include STM32F103C8T6, STM32F103CBT6, and STM32F103RBT6.
Numéro d'article : STM32F103C4T6A
Marques :
Emballer : LQFP-48
Description : Overall, the STM32F103C4T6A is a versatile microcontroller chip that provides a powerful and flexible platform for embedded system development.
Points de pièce
-
The STM32F103C4T6A chip is a 32-bit microcontroller unit (MCU) based on the ARM Cortex-M3 architecture. It offers a wide range of features, including a high-performance processing core, various communication interfaces, and an extensive set of peripheral functions. The chip is commonly used in embedded systems and provides a reliable and efficient solution for applications requiring advanced control and connectivity capabilities.
-
Equivalent
Some equivalent products of the STM32F103C4T6A chip are STM32F103C8T6, STM32F103C6T6, STM32F103C4, and STM32F103CBT6. -
Features
STM32F103C4T6A is a 32-bit microcontroller from STMicroelectronics, featuring an ARM Cortex-M3 core. It has 64KB flash memory, 20KB SRAM, and operates at a maximum frequency of 72MHz. It also offers various peripherals, including ADC, UART, SPI, I2C, timers, PWM, and GPIOs, making it suitable for a wide range of applications. -
Pinout
The STM32F103C4T6A is a microcontroller with a pin count of 48. It is part of the STM32F1 series and features a 32-bit ARM Cortex-M3 core, along with various peripherals such as GPIO, SPI, USART, and more, making it suitable for a wide range of applications. -
Manufacturer
STMicroelectronics is the manufacturer of the STM32F103C4T6A. It is a multinational semiconductor and electronics company based in Europe. -
Application Field
The STM32F103C4T6A microcontroller is suitable for a wide range of applications, including industrial control systems, home automation, consumer electronics, motor control, and wearable devices. Its compact size, low power consumption, and high-performance features make it ideal for various embedded systems requiring real-time control and connectivity. -
Package
The STM32F103C4T6A chip is available in a LQFP (Low-profile Quad Flat Package) package type. It has 48 pins and a size of 7mm x 7mm.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits
Overall, a decent experience with Ovaga's electronic components.