Les images sont à titre de référence uniquement. Voir les spécifications du produit
STSPIN32F0
Advanced BLDC controller with embedded STM32 MCU
Marques: STMicroelectronics
Pièce Fabricant #: STSPIN32F0
Fiche de données: STSPIN32F0 Fiche de données (PDF)
Colis/Caisse: VFQFPN-48
type de produit: Motor / Motion / Ignition Controllers & Drivers
Statut RoHS:
État des stocks: 9458 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureSTSPIN32F0 Description générale
The STSPIN32F0 is a System-In-Package providing an integrated solution suitable for driving three-phase BLDC motors using different driving modes.It embeds a triple half-bridge gate driver able to drive power MOSFETs or IGBTs with a current capability of 600 mA (sink and source). The high- and low-side switches of same half-bridge cannot be simultaneously driven high thanks to an integrated interlocking function.An internal DC/DC buck converter provides the 3.3 V voltage suitable to supply both the MCU and external components. An internal LDO linear regulator provides the supply voltage for gate drivers.The integrated operational amplifiers are available for the signal conditioning of the analog Hall-effect sensors and the shunt resistor signal.A comparator with a programmable threshold is integrated to perform the overcurrent protection.The integrated MCU (STM32F031C6 with extended temperature range, suffix 7 version) allows performing field-oriented control, the 6-step sensorless and other advanced driving algorithm including the speed control loop. It has the write-protection and read-protection feature for the embedded Flash memory to protect against unwanted writing and/or reading.The STSPIN32F0 device also features overtemperature and undervoltage lockout protections and can be put in the standby mode to reduce the power consumption. The device provides 16 general-purpose I/O ports (GPIO) with the 5 V tolerant capability, one 12-bit analog-to-digital converter with up to 9 channels performing conversions in a single-shot or scan modes, 5 synchronizable general-purpose timers and supports an easy to use debugging serial interface (SWD).STSPIN32F0 Advanced BLDC controller with embedde.
Caractéristiques
- Extended operating voltage from 8 to 45 V
- Three-phase gate drivers
- 600 mA sink/source
- Integrated bootstrap diodes
- Cross-conduction prevention
- 32-bit ARM® Cortex®-M0 core:
- Up to 48 MHz clock frequency
- 4-kByte SRAM with HW parity
- 32-kByte Flash memory with option bytes used for write/readout protection
- 3.3. V DC/DC buck converter regulator with overcurrent, short-circuit, and thermal protection
- 12 V LDO linear regulator with thermal protection
- 16 general-purpose I/O ports (GPIO)
- 5 general-purpose timers
- 12-bit ADC converter (up to 9 channels)
- I2C, USART and SPI interfaces
- 4 rail-to-rail operation amplifiers for signal conditioning
- Comparator for overcurrent protection with programmable threshold
- 3FG open-drain output providing the decoded result of 3 Hall sensors inputs
- Standby mode for low power consumption
- UVLO protection on each power supply:
- VM, VDD, VREG and VBOOTx
- On-chip debug support via SWD
- Extended temperature range: -40 to +125 °C
Caractéristiques
| Paramètre | Valeur | Paramètre | Valeur |
|---|---|---|---|
| Manufacturer: | STMicroelectronics | Product Category: | Motor / Motion / Ignition Controllers & Drivers |
| RoHS: | Details | Product: | Brushless DC Motor Controllers |
| Type: | 3 Phase | Operating Supply Voltage: | 8 V to 45 V |
| Output Current: | 600 mA | Operating Supply Current: | 2.5 mA |
| Minimum Operating Temperature: | - 40 C | Maximum Operating Temperature: | + 125 C |
| Mounting Style: | SMD/SMT | Package / Case: | VFQFPN-48 |
| Packaging: | Tray | Brand: | STMicroelectronics |
| Moisture Sensitive: | Yes | Operating Frequency: | 200 kHz |
| Output Voltage: | 3.3 V | Product Type: | Motor / Motion / Ignition Controllers & Drivers |
| Series: | STSPIN32F0 | Factory Pack Quantity: | 1560 |
| Subcategory: | PMIC - Power Management ICs |
Expédition
| Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
| Modalités de paiement | Frais de main | |
|---|---|---|
 |
Virement bancaire | facturer des frais bancaires de 30,00 $ US. |
 |
Pay Pal | facturer des frais de service de 4,0 %. |
 |
Carte de crédit | facturez des frais de service de 3,5%. |
 |
Western union | charge US.00 banking fee. |
 |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
![Produit]( "Produit")
Étape1 :Produit
-
![Emballage sous vide]( "Emballage sous vide")
Étape2 :Emballage sous vide
-
![Sac antistatique]( "Sac antistatique")
Étape3 :Sac antistatique
-
![Emballage individuel]( "Emballage individuel")
Étape4 :Emballage individuel
-
![Boîtes d'emballage]( "Boîtes d'emballage")
Étape5 :Boîtes d'emballage
-
![étiquette d'expédition à code-barres]( "étiquette d'expédition à code-barres")
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The STSPIN32F0 is a compact and high-performance chip developed by STMicroelectronics. It combines a microcontroller unit (MCU) and a system-on-chip (SoC) motor driver in a single package. The chip integrates advanced features such as a field-oriented control (FOC) algorithm, a high-resolution encoder interface, and three half-bridge drivers. It is designed to meet the increasing demands of motor control applications in various industries.
-
Equivalent
There are no direct equivalent products of the STSPIN32F0 chip. However, the STSPIN32F0B6 and the STSPIN32F051 are similar microcontroller-based systems designed to drive 3-phase brushless motors. -
Features
STSPIN32F0 is a system-in-package device integrating a microcontroller and an embedded motion-control coprocessor, suitable for driving three-phase BLDC motors. It offers a wide range of features, including high-performance motion control algorithms, real-time acceleration profiles, trapezoidal and field-oriented control, PWM current control, and UART/I2C communication interfaces. -
Pinout
The STSPIN32F0 has a 48-pin count and is a compact ready-to-use motor driver solution. It integrates a microcontroller, MOSFET drivers, and an energy efficient power stage in a single chip. It is ideal for driving 3-phase brushless motors and can be used in a variety of applications including drones, fans, and home appliances. -
Manufacturer
The manufacturer of the STSPIN32F0 is STMicroelectronics. It is a multinational semiconductor company that designs, develops, and manufactures a wide range of microcontrollers, integrated circuits, and other electronic components. STMicroelectronics serves various industries including automotive, industrial, consumer, and communication sectors. -
Application Field
The STSPIN32F0 is an advanced motor driver for controlling three-phase brushless motors. It is commonly used in applications such as drones, robotics, industrial automation, and consumer devices that require precise control and efficient motor operation. -
Package
The STSPIN32F0 chip is available in a QFN32 package. It has a small form factor and compact size.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
![Produit]( "Produit")
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
![quantity]( "quantity")
La quantité minimum de commande commence à partir de 1 pièce.
-
![shipping]( "shipping")
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
![garantie]( "garantie")
Garantie de qualité de 365 jours pour tous les produits
