Commandes de plus de
$5000
TI TL032ACP
J-FET Amplifier 2 Circuit 8-PDIP
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Marques: Texas Instruments
Pièce Fabricant #: TL032ACP
Fiche de données: TL032ACP Fiche de données (PDF)
Colis/Caisse: 8-PDIP
Statut RoHS:
État des stocks: 6 856 pièces, nouveau original
type de produit: Instrumentation, OP Amps, Buffer Amps
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Tous les prix sont en USD
Qté | Prix unitaire | Prix ext |
---|---|---|
1 | $1,400 | $1,400 |
200 | $0,542 | $108,400 |
500 | $0,523 | $261,500 |
1000 | $0,515 | $515,000 |
En stock: 6 856 PC
TL032ACP Description générale
The TL03x series of JFET-input operational amplifiers offer improved dc and ac characteristics over the TL06x family of low-power BiFET operational amplifiers. On-chip zener trimming of offset voltage yields precision grades as low as 1.5 mV (TL031A) for greater accuracy in dc-coupled applications. The Texas Instruments improved BiFET process and optimized designs also yield improved bandwidths and slew rates without increased power consumption. The TL03x devices are pin-compatible with the TL06x and can be used to upgrade existing circuits or for optimal performance in new designs.
BiFET operational amplifiers offer the inherently higher input impedance of the JFET-input transistors without sacrificing the output drive associated with bipolar amplifiers. This higher input impedance makes the TL3x amplifiers better suited for interfacing with high-impedance sensors or very low-level ac signals. These devices also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption.
The TL03x family has been optimized for micropower operation, while improving on the performance of the TL06x series. Designers requiring significantly faster ac response should consider the Excalibur TLE206x family of low-power BiFET operational amplifiers.
Because BiFET operational amplifiers are designed for use with dual power supplies, care must be taken to observe common-mode input-voltage limits and output swing when operating from a single supply. DC biasing of the input signal is required, and loads should be terminated to a virtual-ground node at midsupply. The TI TLE2426 integrated virtual-ground generator is useful when operating BiFET amplifiers from single supplies.
The TL03x devices are fully specified at ±15 V and ±5 V. For operation in low-voltage and/or single-supply systems, the TI LinCMOS families of operational amplifiers (TLC prefix) are recommended. When moving from BiFET to CMOS amplifiers, particular attention should be paid to slew rate, bandwidth requirements, and output loading.
The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized for operation from 40°C to 85°C. The M-suffix devices are characterized for operation over the full military temperature range of 55°C to 125°C.
Caractéristiques
- Direct Upgrades for the TL06x Low-Power BiFETs
- Low Power Consumption . . . 6.5 mW/Channel Typ
- On-Chip Offset-Voltage Trimming for Improved DC Performance (1.5 mV, TL031A)
- Higher Slew Rate and Bandwidth Without Increased Power Consumption
- Available in TSSOP for Small Form-Factor Designs
Excalibur is a trademark of Texas Instruments.
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Manufacturer | Texas Instruments | Product Category | Precision Amplifiers |
RoHS | Details | Series | TL032A |
Number of Channels | 2 Channel | GBP - Gain Bandwidth Product | 1.1 MHz |
SR - Slew Rate | 5.1 V/us | CMRR - Common Mode Rejection Ratio | 94 dB |
Output Current per Channel | 40 mA | Ib - Input Bias Current | 2 pA |
Vos - Input Offset Voltage | 570 uV | en - Input Voltage Noise Density | 41 nV/sqrt Hz |
Supply Voltage - Max | 30 V | Supply Voltage - Min | 10 V |
Operating Supply Current | 422 uA | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Shutdown | No Shutdown |
Mounting Style | Through Hole | Package / Case | PDIP-8 |
Amplifier Type | Low Power Amplifier | Brand | Texas Instruments |
Dual Supply Voltage | +/- 9 V, +/- 12 V | Height | 4.57 mm |
In - Input Noise Current Density | 0.003 pA/sqrt Hz | Input Type | Rail-to-Rail |
Length | 9.81 mm | Maximum Dual Supply Voltage | +/- 15 V |
Minimum Dual Supply Voltage | +/- 5 V | Operating Supply Voltage | 10 V to 30 V, +/- 5 V to +/- 15 V |
Product | Precision Amplifiers | Product Type | Precision Amplifiers |
Factory Pack Quantity | 50 | Subcategory | Amplifier ICs |
Supply Type | Single, Dual | Technology | BiFET |
Vcm - Common Mode Voltage | Negative Rail + 3.5 V to Positive Rail - 1 V | Voltage Gain dB | 81.58 dB |
Width | 6.35 mm |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
![]() |
Virement bancaire | facturer des frais bancaires de 30,00 $ US. |
![]() |
Pay Pal | facturer des frais de service de 4,0 %. |
![]() |
Carte de crédit | facturez des frais de service de 3,5%. |
![]() |
Western union | charge US.00 banking fee. |
![]() |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits