Commandes de plus de
$5000TI TLC27L2BIP
CMOS Amplifier 2 Circuit 8-PDIP
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Marques: Texas Instruments
Pièce Fabricant #: TLC27L2BIP
Fiche de données: TLC27L2BIP Fiche de données (PDF)
Colis/Caisse: 8-PDIP
type de produit: Instrumentation, OP Amps, Buffer Amps
Statut RoHS:
État des stocks: 6 387 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
TLC27L2BIP Description générale
The TLC27L2 and TLC27L7 dual operational amplifiers combine a wide range of input offset voltage grades with low offset voltage drift, high input impedance, extremely low power, and high gain.
These devices use Texas Instruments silicon-gate LinCMOS technology, which provides offset voltage stability far exceeding the stability available with conventional metal-gate processes.
The extremely high input impedance, low bias currents, and low power consumption make these cost-effective devices ideal for high gain, low frequency, low power applications. Four offset voltage grades are available (C-suffix and I-suffix types), ranging from the low-cost TLC27L2 (10 mV) to the high-precision TLC27L7 (500 µV). These advantages, in combination with good common-mode rejection and supply voltage rejection, make these devices a good choice for new state-of-the-art designs as well as for upgrading existing designs.
In general, many features associated with bipolar technology are available in LinCMOS operational amplifiers, without the power penalties of bipolar technology. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are easily designed with the TLC27L2 and TLC27L7. The devices also exhibit low voltage single-supply operation and ultra-low power consumption, making them ideally suited for remote and inaccessible battery-powered applications. The common-mode input voltage range includes the negative rail.
A wide range of packaging options is available, including small-outline and chip-carrier versions for high-density system applications.
The device inputs and outputs are designed to withstand -100-mA surge currents without sustaining latch-up.
The TLC27L2 and TLC27L7 incorporate internal ESD-protection circuits that prevent functional failures at voltages up to 2000 V as tested under MIL-STD-883C, Method 3015.2; however, care should be exercised in handling these devices as exposure to ESD may result in the degradation of the device parametric performance.
The C-Suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized for operation from -40°C to 85°C. The M-suffix devices are characterized for operation over the full military temperature range of -55°C to 125°C.
Caractéristiques
- Trimmed Offset Voltage: TLC27L7.500 µV Max at 25°C, VDD = 5 V
- Input Offset Voltage Drift . . . Typically 0.1 µV/Month, Including the First 30 Days
- Wide Range of Supply Voltages Over Specified Temperature Range:>
- 0°C to 70°C.3 V to 16 V
- -40°C to 85°C.4 V to 16 V
- -55°C to 125°C.4 V to 16 V
- Single-Supply Operation
- Common-Mode Input Voltage Range Extends Below the Negative Rail (C-Suffix, I-Suffix Types)
- Ultra-Low Power.Typically 95 µW at 25°C, VDD = 5 V
- Output Voltage Range Includes Negative Rail
- High Input Impedance.1012 Typ
- ESD-Protection Circuitry
- Small-Outline Package Option Also Available in Tape and Reel
- Designed-In Latch-Up immunity
LinCMOS is a trademark of Texas Instruments.
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Manufacturer | Texas Instruments | Product Category | Precision Amplifiers |
RoHS | Details | Series | TLC27L2B |
Number of Channels | 2 Channel | GBP - Gain Bandwidth Product | 110 kHz |
SR - Slew Rate | 30 mV/us | CMRR - Common Mode Rejection Ratio | 94 dB |
Output Current per Channel | 30 mA | Ib - Input Bias Current | 0.6 pA |
Vos - Input Offset Voltage | 204 uV | en - Input Voltage Noise Density | 68 nV/sqrt Hz |
Supply Voltage - Max | 16 V | Supply Voltage - Min | 3 V |
Operating Supply Current | 20 uA | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Shutdown | No Shutdown |
Mounting Style | Through Hole | Package / Case | PDIP-8 |
Amplifier Type | Precision Amplifier | Brand | Texas Instruments |
Height | 4.57 mm | Input Type | Rail-to-Rail |
Ios - Input Offset Current | 60 pA | Length | 9.81 mm |
Operating Supply Voltage | 4 V to 16 V | Pd - Power Dissipation | 1 W |
Product | Precision Amplifiers | Product Type | Precision Amplifiers |
Factory Pack Quantity | 50 | Subcategory | Amplifier ICs |
Supply Type | Single | Technology | LinCMOS |
Tradename | LinCMOS | Vcm - Common Mode Voltage | Negative Rail - 0.2 V to Positive Rail - 1 V |
Width | 6.35 mm |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
![]() |
Virement bancaire | facturer des frais bancaires de 30,00 $ US. |
![]() |
Pay Pal | facturer des frais de service de 4,0 %. |
![]() |
Carte de crédit | facturez des frais de service de 3,5%. |
![]() |
Western union | charge US.00 banking fee. |
![]() |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits