Commandes de plus de
$5000
TI TLV2332IP
Operational Amplifiers - Op Amps LiNCMOS Med Bias
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Marques: Texas Instruments
Pièce Fabricant #: TLV2332IP
Fiche de données: TLV2332IP Fiche de données (PDF)
Colis/Caisse: 8-PDIP
Statut RoHS:
État des stocks: 8 144 pièces, nouveau original
type de produit: Instrumentation, OP Amps, Buffer Amps
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Tous les prix sont en USD
Qté | Prix unitaire | Prix ext |
---|---|---|
1 | $5,245 | $5,245 |
200 | $2,031 | $406,200 |
500 | $1,960 | $980,000 |
1000 | $1,924 | $1924,000 |
En stock: 8 144 PC
TLV2332IP Description générale
The TLV233x operational amplifiers are in a family of devices that has been specifically designed for use in low-voltage single-supply applications. Unlike the TLV2322 which is optimized for ultra-low power, the TLV233x is designed to provide a combination of low power and good ac performance. Each amplifier is fully functional down to a minimum supply voltage of 2 V, is fully characterized, tested, and specified at both 3-V and 5-V power supplies. The common-mode input-voltage range includes the negative rail and extends to within 1 V of the positive rail.
Having a maximum supply current of only 310 uA per amplifier over full temperature range, the TLV233x devices offer a combination of good ac performance and microampere supply currents. From a 3-V power supply, the amplifier's typical slew rate is 0.38 V/us and its bandwidth is 300 kHz.
These amplifiers offer a level of ac performance greater than that of many other devices operating at comparable power levels. The TLV233x operational amplifiers are especially well suited for use in low-current or battery-powered applications.
Low-voltage and low-power operation has been made possible by using the Texas Instruments silicon-gate LinCMOSTM technology. The LinCMOS process also features extremely high input impedance and ultra-low bias currents making these amplifiers ideal for interfacing to high-impedance sources such as sensor circuits or filter applications.
To facilitate the design of small portable equipment, the TLV233x is made available in a wide range of package options, including the small-outline and thin-shrink small-outline package (TSSOP). The TSSOP package has significantly reduced dimensions compared to a standard surface-mount package. Its maximum height of only 1.1 mm makes it particularly attractive when space is critical.
The device inputs and outputs are designed to withstand -100-mA currents without sustaining latch-up. The TLV233x incorporates internal ESD-protection circuits that prevents functional failures at voltages up to 2000 V as tested under MIL-STD 883C, Method 3015.2; however, care should be exercised in handling these devices as exposure to ESD may result in the degradation of the device parametric performance.
Caractéristiques
- Wide Range of Supply Voltages Over Specified Temperature Range:
- TA = -40°C to 85°C.2 V to 8 V
- Fully Characterized at 3 V and 5 V
- Single-Supply Operation
- Common-Mode Input-Voltage Range
Extends Below the Negative Rail and up to
VDD -1 V at TA = 25°C - Output Voltage Range Includes Negative Rail
- High Input Impedance.1012 Typ
- ESD-Protection Circuitry
- Designed-In Latch-Up Immunity
LinCMOS is a trademark of Texas Instruments Incorporated.
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Manufacturer | Texas Instruments | Product Category | Operational Amplifiers - Op Amps |
RoHS | Details | Mounting Style | Through Hole |
Package / Case | PDIP-8 | Number of Channels | 2 Channel |
Supply Voltage - Max | 8 V | GBP - Gain Bandwidth Product | 525 kHz |
Output Current per Channel | 9 mA | SR - Slew Rate | 430 mV/us |
Vos - Input Offset Voltage | 9 mV | Supply Voltage - Min | 2 V |
Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 85 C |
Ib - Input Bias Current | 2 nA | Operating Supply Current | 210 uA |
Shutdown | No Shutdown | CMRR - Common Mode Rejection Ratio | 91 dB |
en - Input Voltage Noise Density | 32 nV/sqrt Hz | Series | TLV2332 |
Amplifier Type | Low Power Amplifier | Brand | Texas Instruments |
Height | 4.57 mm | Input Type | Rail-to-Rail |
Length | 9.81 mm | Minimum Dual Supply Voltage | +/- 1 V |
Operating Supply Voltage | 2 V to 8 V, +/- 1 V to +/- 4 V | Output Type | Rail-to-Rail |
Pd - Power Dissipation | 1 W | Product | Operational Amplifiers |
Product Type | Op Amps - Operational Amplifiers | Factory Pack Quantity | 50 |
Subcategory | Amplifier ICs | Supply Type | Single, Dual |
Technology | LinCMOS | Tradename | LinCMOS |
Vcm - Common Mode Voltage | Negative Rail - 0.2 V to Positive Rail - 1 V | Voltage Gain dB | 104.61 dB |
Width | 6.35 mm |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
![]() |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
![]() |
Virement bancaire | facturer des frais bancaires de 30,00 $ US. |
![]() |
Pay Pal | facturer des frais de service de 4,0 %. |
![]() |
Carte de crédit | facturez des frais de service de 3,5%. |
![]() |
Western union | charge US.00 banking fee. |
![]() |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits