Commandes de plus de
$5000TI TPS61220DCKR
Boost Switching Regulator IC Positive Adjustable 1.8V 1 Output 200mA (Switch) 6-TSSOP, SC-88, SOT-363
Marques: TI
Pièce Fabricant #: TPS61220DCKR
Fiche de données: TPS61220DCKR Fiche de données (PDF)
Colis/Caisse: SC70-6
Statut RoHS:
État des stocks: 5 943 pièces, nouveau original
type de produit: Voltage Regulators , DC DC Switching Regulators
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Tous les prix sont en USD
Qté | Prix unitaire | Prix ext |
---|---|---|
1 | $0,434 | $0,434 |
10 | $0,348 | $3,480 |
30 | $0,312 | $9,360 |
100 | $0,267 | $26,700 |
500 | $0,233 | $116,500 |
1000 | $0,222 | $222,000 |
En stock: 5 943 PC
TPS61220DCKR Description générale
The TPS6122x family devices provide a power-supply solution for products powered by either a single-cell, two-cell, or three-cell alkaline, NiCd or NiMH, or one-cell Li-Ion or Li-polymer battery. Possible output currents depend on the input-to-output voltage ratio. The boost converter is based on a hysteretic controller topology using synchronous rectification to obtain maximum efficiency at minimal quiescent currents. The output voltage of the adjustable version can be programmed by an external resistor divider, or is set internally to a fixed output voltage. The converter can be switched off by a featured enable pin. While being switched off, battery drain is minimized. The device is offered in a 6-pin SC-70 package (DCK) measuring 2 mm × 2 mm to enable small circuit layout size.
Caractéristiques
- Up to 95% Efficiency at Typical Operating
Conditions - 5.5 µA Quiescent Current
- Startup Into Load at 0.7 V Input Voltage
- Operating Input Voltage from 0.7 V to 5.5 V
- Pass-Through Function during Shutdown
- Minimum Switching Current 200 mA
- Protections:
- Output Overvoltage
- Overtemperature
- Input Undervoltage Lockout
- Adjustable Output Voltage from 1.8 V to 6 V
- Fixed Output Voltage Versions
- Small 6-pin SC-70 Package
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Topology | Boost | Vin (min) (V) | 0.7 |
Vin (max) (V) | 5.5 | Vout (min) (V) | 1.8 |
Vout (max) (V) | 6 | Switch current limit (typ) (A) | 0.4 |
Type | Converter | Regulated outputs (#) | 1 |
Switching frequency (min) (kHz) | 500 | Switching frequency (max) (kHz) | 2000 |
Iq (typ) (mA) | 0.005 | Features | Synchronous Rectification |
Duty cycle (max) (%) | 90 | Operating temperature range (°C) | -40 to 85 |
Rating | Catalog |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The TPS61220DCKR is a step-up DC/DC converter chip from Texas Instruments. It is designed to provide efficient power management solutions for portable and battery-powered applications. This chip converts a lower input voltage to a higher output voltage, making it ideal for boosting battery power for devices such as smartphones, tablets, and portable electronics.
-
Equivalent
The equivalent products of TPS61220DCKR chip are TPS61221DCK, TPS61222DCK, TPS61223DCK, TPS61224DCK, TPS61225DCK, TPS61226DCK, TPS61227DCK, and TPS61228DCK. These chips are all step-up DC/DC converters with similar specifications and features. -
Features
The TPS61220DCKR is a high efficiency boost converter with a 1.8A switch that supports output voltages up to 12V. It includes an adaptive voltage scaling feature and operates from a single cell Li-ion battery. This device is designed for use in portable and battery-powered systems that require high efficiency and low quiescent current. -
Pinout
The TPS61220DCKR is a 6-pin DC-DC boost converter with an input voltage range of 0.3V to 5.5V. It provides up to 5.5V output voltage and has a 1.2MHz switching frequency. The pins are labeled as: EN (enable), VIN (input voltage), PG (power good), SW (switch node), GND (ground), and VOUT (output voltage). -
Manufacturer
The TPS61220DCKR is manufactured by Texas Instruments, which is an American multinational semiconductor company. Texas Instruments specializes in designing and manufacturing semiconductors, offering a wide range of products for various industries including consumer electronics, automotive, and industrial applications. -
Application Field
The TPS61220DCKR is commonly used in applications where a boost converter is needed to efficiently step up voltage levels in portable devices such as smartphones, wearables, portable medical devices, and various battery-powered systems. Its small size, high efficiency, and low quiescent current make it suitable for a wide range of compact and power-sensitive applications. -
Package
The TPS61220DCKR chip is a SMD package type with six pins, in the form of a dual in-line package (DCK), and has a size of 2.5mm x 1.5mm x 1mm.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits