Commandes de plus de
$5000TI TPS70930DBVR
LDO Voltage Regulators 150mA 30V Ultra-Lo IQ Wd Input LDO Reg
Marques: TI
Pièce Fabricant #: TPS70930DBVR
Fiche de données: TPS70930DBVR Fiche de données (PDF)
Colis/Caisse: SOT-23 (DBV)-5
type de produit: Voltage Regulators , Linear, Low Drop Out Regulators
Statut RoHS:
État des stocks: 8 431 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
TPS70930DBVR Description générale
The TPS709 series of linear regulators are ultralow, quiescent current devices designed for power-sensitive applications. A precision band-gap and error amplifier provides 2% accuracy over temperature. Quiescent current of only 1 µA makes these devices ideal solutions for battery-powered, always-on systems that require very little idle-state power dissipation. These devices have thermal-shutdown, current-limit, and reverse-current protections for added safety.
Shutdown mode is enabled by pulling the EN pin low. The shutdown current in this mode goes down to 150 nA, typical.
The TPS709 series is available in WSON-6 and SOT-23-5 packages.
Caractéristiques
- Ultra-low IQ: 1 µA
- Reverse current protection
- Low ISHUTDOWN: 150 nA
- Input voltage range: 2.7 V to 30 V
- Supports 200-mA peak output
- 2% accuracy over temperature
- Available in fixed-output voltages: 1.2 V to 6.5 V
- Thermal shutdown and overcurrent protection
- Packages: SOT-23-5, WSON-6
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Output options | Fixed Output | Iout (max) (A) | 0.15 |
Vin (max) (V) | 30 | Vin (min) (V) | 2.7 |
Vout (max) (V) | 6 | Vout (min) (V) | 1.2 |
Fixed output options (V) | 1.2, 1.35, 1.5, 1.6, 1.8, 1.9, 2.5, 2.7, 2.8, 3, 3.3, 3.45, 3.6, 3.8, 3.9, 4.2, 5, 6 | Noise (µVrms) | 190 |
Iq (typ) (mA) | 0.001 | Thermal resistance θJA (°C/W) | 73 |
Rating | Catalog | Load capacitance (min) (µF) | 2 |
Regulated outputs (#) | 1 | Features | Enable, Reverse Current Protection, Reverse current protection |
Accuracy (%) | 2 | PSRR at 100 KHz (dB) | 26 |
Dropout voltage (Vdo) (typ) (mV) | 300 |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The TPS70930DBVR is a low-dropout voltage regulator chip designed for use in a wide range of applications. It offers a fixed output voltage of 3.0V and can deliver up to 150mA of current. The chip features low quiescent current, high accuracy, and thermal shutdown protection, making it an ideal choice for battery-powered devices and other low-power applications.
-
Equivalent
The equivalent products of TPS70930DBVR chip are LM2937 IMP-3, LP2951-30DBVR, LM285D-2.5, LP2950C-3.0, and MCP1700T-3302E/TT. These chips are all low-dropout voltage regulators with similar specifications and features. -
Features
The TPS70930DBVR is a low dropout regulator with ultra-low quiescent current, making it ideal for power-sensitive applications. It has a fixed output voltage of 3.0V, a maximum input voltage of 30V, and a high PSRR of 60 dB at 1 kHz. It also features thermal shutdown and current limit protection. -
Pinout
The TPS70930DBVR is a fixed voltage regulator with a pin count of 5. Pin functions are Input (VIN), Ground (GND), Enable (EN), Output (VOUT), and Output Bypass (BP). It provides a regulated output voltage of 3.0V with a maximum output current of 150mA. -
Manufacturer
The TPS70930DBVR is manufactured by Texas Instruments. Texas Instruments is a global semiconductor company that designs and manufactures a range of semiconductors and integrated circuits for various applications, including industrial, automotive, consumer electronics, and communications. They are known for their high-quality and innovative products in the electronics industry. -
Application Field
The TPS70930DBVR is a low dropout voltage regulator designed for applications that require a regulated output voltage with minimal dropout voltage. Common application areas include battery-powered devices, portable electronics, automotive systems, industrial controls, and other applications where a stable and reliable power supply is needed. -
Package
The TPS70930DBVR is a SOT-23-5 package that is in a surface-mount form. It has a size of 2.9mm x 1.6mm x 1.5mm and a capacity of 50mA with a 3.0V fixed output voltage.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits