Commandes de plus de
$5000TI TUSB212RWBR
Signal Processing Interface 12-X2QFN (1.6x1.6)
Marques: TI
Pièce Fabricant #: TUSB212RWBR
Fiche de données: TUSB212RWBR Fiche de données (PDF)
Colis/Caisse: X2QFN-12
type de produit: Specialized
Statut RoHS:
État des stocks: 3 000 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
TUSB212RWBR Description générale
The TUSB212 is a USB High-Speed (HS) signal conditioner, designed to compensate for ISI signal loss in a transmission channel.
TUSB212 has a patent-pending design which is agnostic to USB Low Speed (LS) and Full Speed (FS) signals. LS and FS signal characteristics are unaffected by the TUSB212 while HS signals are compensated.
Programmable signal AC boost and DC boost permits fine tuning device performance to optimize High Speed signals at the connector. This helps to pass USB High Speed electrical compliance tests.
In addition, TUSB212 is compatible with the USB On-The-Go (OTG) and Battery Charging (BC) protocols.
Caractéristiques
- Compatible with USB 2.0, OTG 2.0 and BC 1.2
- Pin strap or I2C configurable
- Support for LS, FS, HS signaling
- Ultra-low USB Disconnect and Shutdown Power Consumption
- Selectable Signal Gain Via Daisy Chain Device for High Loss Applications
- D1P/M and D2P/M Interchangeable and Host/Device Agnostic
- Supports up to 5m pre-channel or 2m post-channel Cable Length
- Four Selectable AC Boost Settings Via External Pulldown Resistor
- DC Boost Along With AC Boost for Best Signal Integrity
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Type | Redriver | Function | USB 2.0 |
USB speed (MBits) | 480 | Number of channels | 1 |
Supply voltage (max) (V) | 3.6 | Supply voltage (min) (V) | 3 |
Input/output voltage (min) (V) | 0 | Input/output voltage (max) (V) | 3.6 |
Configuration | USB 2.0 Single-channel | Features | USB 2.0 Redriver with 4 Meter Cable Redriving Strength |
Rating | Catalog | Operating temperature range (°C) | -40 to 85, 0 to 70 |
Supply current (max) (µA) | 30000 | ESD HBM (typ) (kV) | 2 |
Bandwidth (MHz) | 240 |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The TUSB212RWBR chip is a USB Type-C controller that supports USB Power Delivery 3.0 and is designed for use in wired and wireless USB-C applications. It offers high-performance data transmission, power delivery, and signal integrity for a wide range of devices.
-
Equivalent
Some equivalent alternatives to the TUSB212RWBR chip are the USB2ANY, TUSB212ICRWBR, and TUSB212SWIRWBR chips. These chips are also designed for USB Type-C and USB Power Delivery applications. -
Features
The TUSB212RWBR is a USB Type-C reversible signal conditioner with integrated USB communication pipe to support USB Type-C connector integration. It offers ESD protection up to ±30kV and supports USB 3.2 Gen 2 data rates. The device is designed with a configurable I²C slave interface for device configuration. -
Pinout
The TUSB212RWBR is a USB Type-C™ and USB PD 2.0 linear redriver with two Type-C connectors. It has a 36-pin count and functions as a USB signal conditioning device, providing signal enhancements for longer USB connections. -
Manufacturer
The manufacturer of the TUSB212RWBR is Texas Instruments. Texas Instruments is an American semiconductor company that designs and manufactures a wide range of semiconductor products, including microcontrollers, analog integrated circuits, and digital signal processors. They are a leading provider of electronic components for various industries, including automotive, industrial, and consumer electronics. -
Application Field
The TUSB212RWBR is commonly used in applications such as smartphones, tablets, laptops, and other portable devices that require USB Type-C connectivity. It enables fast data transfer rates and power delivery capabilities, making it ideal for a wide range of consumer electronics products. -
Package
The TUSB212RWBR chip is in a WQFN-16 package type, available in reel form, and has a size of 4mm x 4mm.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits