TI UCC20225NPLR
Gate Driver Capacitive Coupling 2500Vrms 2 Channel 13-VLGA (5x5)
Marques: TI
Pièce Fabricant #: UCC20225NPLR
Fiche de données: UCC20225NPLR Fiche de données (PDF)
Colis/Caisse: VLGA-13
type de produit: Gate and Power Driver
Statut RoHS:
État des stocks: 2810 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureUCC20225NPLR Description générale
The UCC20225 is an isolated single input, dual-output gate driver with 4-A source and 6-A sink peak current in a 5-mm x 5-mm LGA-13 package. It is designed to drive power transistors up to 5-MHz with best-in-class propagation delay and pulse-width distortion.
The input side is isolated from the two output drivers by a 2.5-kVRMS isolation barrier, with minimum 100-V/ns common-mode transient immunity (CMTI). Internal functional isolation between the two output-side drivers allows working voltage up to 700-VDC.
The UCC20225 allows programmable dead time (DT) through a resistor on DT pin. A disable pin shuts down both outputs simultaneously when it is set high, and allows normal operation when left open or grounded.
The device accepts VDD supply voltages up to 25-V. A wide input VCCI range from 3-V to 18-V makes the driver suitable for interfacing with both analog and digital controllers. All the supply voltage pins have under voltage lock-out (UVLO) protection.
With all these advanced features, the UCC20225 enables high power density, high efficiency, and robustness in a wide variety of power applications.
Caractéristiques
- Single Input, Dual Output with Programmable Deadtime
- 5-mm x 5-mm Space-Saving LGA-13 Package
- Switching Parameters:
- 19-ns Typical Propagation Delay
- 5-ns Maximum Delay Matching
- 6-ns Maximum Pulse-Width Distortion
- CMTI Greater than 100-V/ns
- 4-A Peak Source, 6-A Peak Sink Output
- TTL and CMOS Compatible Inputs
- 3-V to 18-V Input VCCI Range
- Up to 25-V VDD with 8-V UVLO
- Programmable Dead Time
- Rejects Input Transients Shorter than 5-ns
- Fast Disable for Power Sequencing
- Safety-Related Certifications:
- 3535-VPK Isolation per DIN V VDE V 0884-11:2017-01
- 2500-VRMS Isolation for 1 Minute per UL 1577
- CQC Certification per GB4943.1-2011
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Number of channels | 2 | Isolation rating | Functional |
Withstand isolation voltage (VISO) (Vrms) | 2500 | Working isolation voltage (VIOWM) (Vrms) | 792 |
Transient isolation voltage (VIOTM) (VPK) | 3535 | Power switch | IGBT, MOSFET, SiCFET |
Peak output current (A) | 6 | Features | Disable, Programmable dead time |
Output VCC/VDD (max) (V) | 25 | Output VCC/VDD (min) (V) | 9.2 |
Input VCC (min) (V) | 3 | Input VCC (max) (V) | 18 |
Propagation delay time (µs) | 0.019 | Input threshold | CMOS, TTL |
Operating temperature range (°C) | -40 to 125 | Rating | Catalog |
Bus voltage (max) (V) | 792 | Rise time (ns) | 6 |
Fall time (ns) | 7 |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The UCC20225NPLR chip is a dual synchronous rectifier controller that is used in power supply applications. It is designed to work with both synchronous buck and half-bridge topologies and features adjustable dead-time control, adaptive dead-time optimization, and advanced protection features. This chip helps improve efficiency and performance in power supply designs.
-
Equivalent
The equivalent products of UCC20225NPLR chip are LTC3630, TPS61165, TPS62400, TPS61165N, and LM26420. These chips offer similar functionality and features, making them suitable alternatives for UCC20225NPLR in various applications. -
Features
- Dual-channel, high-speed USB Type-C buck-boost controller - Supports multi-mode operation - Integrated 2A/3A power switches - 5V to 22V input voltage range - Adjustable 3.3V to 14V output voltage - 3MHz switching frequency - Overcurrent, overvoltage, and thermal protection circuits - Compact 3mm x 3mm QFN package -
Pinout
The UCC20225NPLR is a 16-pin integrated circuit (IC) dual driver for synchronous rectification in DC/DC converters. It is used to control power MOSFETs in various applications, such as server, telecom, and industrial power supplies. The device features dual 6-A driver outputs and supports operation up to 36 V. -
Manufacturer
The manufacturer of the UCC20225NPLR is Texas Instruments. Texas Instruments is an American technology company that designs and manufactures semiconductors and integrated circuits for a variety of applications, including consumer electronics, industrial equipment, and telecommunications. Founded in 1930, Texas Instruments is a global leader in the semiconductor industry. -
Application Field
The UCC20225NPLR is a synchronous step-down DC/DC controller with dual outputs, making it suitable for various applications such as telecommunications, networking, and industrial power supplies. It is ideal for applications that require high efficiency and tight regulation for multiple output voltages. -
Package
The UCC20225NPLR chip comes in a surface-mount package type with 16 pins. It is a dual-channel half-bridge gate driver IC that measures 3.00mm x 6.40mm in size.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits