TI WL1835MODGBMOCR
Bluetooth, WiFi 802.11b/g/n, Bluetooth 4.2 Transceiver Module 2.4GHz Surface Mount
Marques: TI
Pièce Fabricant #: WL1835MODGBMOCR
Fiche de données: WL1835MODGBMOCR Fiche de données (PDF)
Colis/Caisse: SMD
type de produit: RF Transceiver Modules
Statut RoHS:
État des stocks: 600 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureWL1835MODGBMOCR Description générale
The certified WiLink™ 8 module from TI offers high throughput and extended range along with Wi-Fi® and Bluetooth® coexistence (WL1835MOD only) in a power-optimized design. The WL18x5MOD device is a 2.4-GHz module, two antenna solution. The device is FCC, IC, ETSI/CE, and TELEC certified for AP and client. TI offers drivers for high-level operating systems such as Linux and Android™. Additional drivers, such as WinCE and RTOS, which includes QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties.
Caractéristiques
- General
- Integrates RF, power amplifiers (PAs), clock, RF switches, filters, passives, and power management
- Quick hardware design with TI module collateral and reference designs
- Operating temperature: –20°C to +70°C
- Small form factor: 13.3 × 13.4 × 2 mm
- 100-pin MOC package
- FCC, IC, ETSI/CE, and TELEC certified with PCB, dipole, chip, and PIFA antennas
- Wi-Fi
- WLAN baseband processor and RF transceiver support of IEEE Std 802.11b, 802.11g, and 802.11n
- 20- and 40-MHz SISO and 20-MHz 2 × 2 MIMO at 2.4 GHz for high throughput: 80 Mbps (TCP), 100 Mbps (UDP)
- 2.4-GHz MRC support for extended range
- Fully calibrated: production calibration not required
- 4-bit SDIO host interface support
- Wi-Fi direct concurrent operation (multichannel, multirole)
- Bluetooth and Bluetooth low energy (WL183xMOD only)
- Bluetooth 5.1 secure connection compliant and CSA2 support (declaration ID: D032799)
- Host controller interface (HCI) transport for Bluetooth over UART
- Dedicated audio processor support of SBC encoding + A2DP
- Dual-mode Bluetooth and Bluetooth low energy
- TI’s Bluetooth and Bluetooth low energy certified stack
- Key benefits
- Reduces design overhead
- Differentiated use cases by configuring WiLink™ 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channel (Wi-Fi networks)
- Best-in-class Wi-Fi with high-performance audio and video streaming reference applications with up to 1.4× the range versus one antenna
- Different provisioning methods for in-home devices connectivity to Wi-Fi in one step
- Lowest Wi-Fi power consumption in connected idle (< 800 µA)
- Configurable wake on WLAN filters to only wake up the system
- Wi-Fi and Bluetooth single antenna coexistence
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Processor | External MPU | Type | Module, Transceiver |
Protocols | Combo (Wi-Fi + Bluetooth), Wi-Fi 2.4 GHz | Throughput (max) (MBits) | 100 |
Security | Networking security (WPA3) | Features | 2x2 MIMO, 802.11bgn, AP, Bluetooth, Bluetooth low energy, COEX, STA, Wi-Fi direct mode |
Certifications | CE, FCC, ISED, MIC | Operating temperature range (°C) | -20 to 70 |
Rating | Catalog |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The WL1835MODGBMOCR chip is a wireless connectivity module developed by Texas Instruments. It is designed for embedded applications requiring Wi-Fi and Bluetooth connectivity. The chip integrates a Wi-Fi transceiver and a Bluetooth transceiver, enabling devices to communicate wirelessly with other devices or networks. It offers high-performance Wi-Fi and Bluetooth functionality in a compact form factor, making it ideal for various IoT and smart home applications.
-
Equivalent
There are no direct equivalent products of the WL1835MODGBMOCR chip. However, similar alternatives include the ESP32 and nRF52840, which offer similar functionalities and features for wireless communication and IoT applications. -
Features
The WL1835MODGBMOCR is a Wi-Fi and Bluetooth module by Texas Instruments. Its features include support for 2.4 and 5 GHz bands, Wi-Fi Direct and Soft AP modes, Bluetooth Low Energy (BLE) connectivity, and Bluetooth Classic support. It also offers integrated power management and enhanced security capabilities. -
Pinout
The pin count of the WL1835MODGBMOCR module is 88. It is a wireless network module that integrates Wi-Fi, Bluetooth, and Bluetooth Low Energy (BLE) functionalities. -
Manufacturer
The manufacturer of the WL1835MODGBMOCR is Texas Instruments. It is an American technology company that specializes in designing and manufacturing semiconductors and various integrated circuits. -
Application Field
The WL1835MODGBMOCR is a wireless connectivity module typically used in applications such as home automation, industrial automation, smart grids, healthcare, and asset tracking. It enables wireless communication over Bluetooth and Wi-Fi, making it suitable for various IoT devices requiring connectivity and data transfer capabilities. -
Package
The WL1835MODGBMOCR chip has a Ball Grid Array (BGA) package type, with a form factor of 7.5mm x 7.5mm.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits