Commandes de plus de
$5000TI BQ24075TRGTR
Charger IC Lithium Ion 16-VQFN (3x3)
Marques: Texas Instruments
Pièce Fabricant #: BQ24075TRGTR
Fiche de données: BQ24075TRGTR Fiche de données (PDF)
Colis/Caisse: VQFN-16
Statut RoHS:
État des stocks: 6 178 pièces, nouveau original
type de produit: Battery Chargers
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Tous les prix sont en USD
Qté | Prix unitaire | Prix ext |
---|---|---|
1 | $1,917 | $1,917 |
10 | $1,593 | $15,930 |
30 | $1,391 | $41,730 |
100 | $0,992 | $99,200 |
500 | $0,898 | $449,000 |
1000 | $0,857 | $857,000 |
En stock: 6 178 PC
BQ24075TRGTR Description générale
The BQ2407xT series of devices are integrated Li-ion linear chargers and system power path management devices targeted at space-limited portable applications. The devices operate from either a USB port or AC adapter and support charge currents up to 1.5A. The input voltage range with input over-voltage protection supports unregulated adapters. The USB input current limit accuracy and start up sequence allow the BQ2407xT to meet USB-IF inrush current specification. Additionally, the input dynamic power management (VIN - DPM) prevents the charger from crashing incorrectly configure USB sources.
The BQ2407xT features dynamic power path management (DPPM) that powers the system while simultaneously and independently charging the battery. The DPPM circuit reduces the charge current when the input current limit causes the system output to fall to the DPPM threshold; thus, supplying the system load at all times while monitoring the charge current separately. This feature reduces the number of charge and discharge cycles on the battery, allows for proper charge termination and enables the system to run with a defective or absent battery pack.
Additionally, the regulated system input enables instant system turn-on when plugged in even with a totally discharged battery. The power-path management architecture also permits the battery to supplement the system current requirements when the adapter cannot deliver the peak system currents, enabling the use of a smaller adapter.
The battery is charged in three phases: conditioning, constant current, and constant voltage. In all charge phases, an internal control loop monitors the IC junction temperature and reduces the charge current if the internal temperature threshold is exceeded. The charger power stage and charge current sense functions are fully integrated. The charger function has high accuracy current and voltage regulation loops, charge status display, and charge termination. The input current limit and charge current are programmable using external resistors.
Caractéristiques
- Fully Compliant USB Charger
- Selectable 100 mA and 500 mA maximum input current
- 100 mA Maximum current limit ensures compliance to USB-IF standard
- Input based dynamic power management (VIN-DPM) for protection against poor USB sources
- 28 V Input lting with over-voltage protection
- Integrated dynamic power path management (DPPM) function simultaneously and independently powers the system and charges the battery
- System output tracks battery voltage (BQ24072T)
- Supports up to 1.5 A charge current with current monitoring output (ISET)
- Programmable Input Current Limit up to 1.5 A for wall adapters
- Battery disconnect function with SYSOFF input
- Reverse current, short-circuit and thermal protection
- Flexible voltage based NTC thermistor input
- Proprietary start up sequence limits inrush current
- Status indication – charging/done, power good
- Small 3 mm × 3 mm 16 Lead VQFN Package
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Number of series cells | 1 | Charge current (max) (A) | 1.5 |
Vin (max) (V) | 6.4 | Cell chemistry | Li-Ion/Li-Polymer |
Battery charge voltage (min) (V) | 4.2 | Battery charge voltage (max) (V) | 4.2 |
Absolute max Vin (max) (V) | 28 | Control topology | Linear |
Control interface | Standalone (RC-Settable) | Features | BAT temp thermistor monitoring (hot/cold profile), IC thermal regulation, Input OVP, Power Path, VINDPM (Input voltage threshold to maximize adaptor power) |
Vin (min) (V) | 4.35 | Rating | Catalog |
Operating temperature range (°C) | -40 to 85 |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The BQ24075TRGTR is a highly integrated standalone linear Li-ion and Li-polymer battery charger for portable applications. It features a low-dropout linear regulator for power supply, accurate voltage regulation, and USB-compatible input voltage range. The chip also includes battery temperature monitoring and charging safety timer functions.
-
Equivalent
The equivalent products of the BQ24075TRGTR chip are BQ24090, BQ24091, BQ24092, BQ24094, BQ24113, and BQ24153. These chips are all battery chargers and power management ICs designed for portable devices such as smartphones and tablets. -
Features
1. Integrated power path management with integrated FETs 2. Programmable input current limit up to 1.5A 3. Fast charge up to 4.5A with thermal regulation 4. USB 2.0 compatible for BC1.2 detection 5. Integrated battery over-voltage protection 6. Small package size (RGR) for space-constrained applications. -
Pinout
The BQ24075TRGTR is a 12-pin IC with the following functions: 1. Pin 1 (CE): Charger enable input 2. Pin 2 (PG): Power good output 3. Pin 3 (PGND): Ground for charger 4. Pin 4 (AC): Input for charger 5. Pin 5 (TS): Thermistor input 6. Pin 6 (BAT): Battery input 7. Pin 7 (SYS): System output 8. Pin 8 (IMVP): Input voltage present Additional Pins: TR (thermal regulation input), SR (system reset output), TS (thermal sensor). -
Manufacturer
The manufacturer of BQ24075TRGTR is Texas Instruments, a leading American semiconductor company that designs and manufactures a wide range of integrated circuits including analog, digital, and mixed-signal devices for various applications in the electronics industry. -
Application Field
The BQ24075TRGTR is commonly used in portable devices such as smartphones, tablets, and portable media players as a single-cell Li-ion battery charger. It is also suitable for use in power banks, wireless headsets, and other battery-powered devices requiring a compact, efficient charging solution. -
Package
The BQ24075TRGTR is a 4mm x 4mm QFN package with a form factor of 0.8mm height. It is a linear charger IC with power path management for single-cell Li-ion and Li-polymer batteries, with a size of 16 pins.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits