Commandes de plus de
$5000TI DS26C32ATMX
This quad receiver is ideal for applications requiring reliable and high-speed data transmission, thanks to its RS-422/RS-423 compatibility
Marques: Texas Instruments
Pièce Fabricant #: DS26C32ATMX
Fiche de données: DS26C32ATMX Fiche de données (PDF)
Colis/Caisse: SOIC-Narrow-16
type de produit: Drivers, Receivers, Transceivers
Statut RoHS:
État des stocks: 6 626 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
DS26C32ATMX Description générale
A standout in its category, the DS26C32ATMX serves as a quad differential line receiver designed to excel in the transmission of digital data over balanced lines. Its wide voltage range, typically between ±7V and ±14V, renders it suitable for a diverse range of applications. Boasting high-speed capabilities, it is capable of managing data rates up to 20 Mbps, making it an ideal fit for high-speed communication systems. The device's typical input hysteresis of 35 mV ensures noise immunity and reliable signal reception, while its thermal shutdown protection safeguards it against excessive temperatures. Its small package size and low power consumption make it a perfect fit for space-constrained and energy-efficient designs. The DS26C32ATMX is commonly employed in industrial automation, telecommunications, and networking applications where dependable differential signaling is vital for data transmission over long distances
Caractéristiques
- 16 E1, T1, or J1 Short/Long-Haul Line Interface Units
- Independent E1, T1 or J1 Selections
- Fully Internal Impedance Match Requires No External Resistors
- Software-Selectable Transmit and ReceiveSide Impedance Match
- Crystal-Less Jitter Attenuator
- Selectable Single-Rail and Dual-Rail Mode and AMI or HDB3/B8ZS Line Encoding and Decoding
- Detection and Generation of AIS
- Digital/Analog Loss of Signal Detection as per T1.231, G.775 and ETS 300 233
- External Master Clock Can Be Multiple of 2.048MHz or 1.544MHz for T1/J1 or E1 Operation; This Clock Will Be Internally Adapted for T1 or E1 Usage
- Receiver Signal Level Indicator from -2.5dB to -38dB in T1 Mode and -3dB to -43dB in E1 Mode in 2.5dB Increments
- Two Built-In BERT Testers for Diagnostics
- 8-Bit Parallel Interface Support for Intel or Motorola Mode or a 4-Wire Serial Interface
- Transmit Short-Circuit Protection
- G.772 Nonintrusive Monitoring
- Receive Monitor Mode Handles Combinations of 14dB to 30dB of Resistive Attenuation Along with 12dB to 30dB of Cable Attenuation
- Specification Compliance to the Latest T1 and E1 Standards—ANSI T1.102, AT&T Pub 62411, T1.231, T1.403, ITU-T G.703, G.742, G.775, G.823, ETS 300 166, and ETS 300 233
- Single 3.3V Supply with 5V Tolerant I/O
- JTAG Boundary Scan as Per IEEE 1149.1
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Manufacturer | Texas Instruments | Product Category | RS-422 Interface IC |
RoHS | N | Mounting Style | SMD/SMT |
Package / Case | SOIC-Narrow-16 | Series | DS26C32AT |
Number of Receivers | 4 Receiver | Supply Voltage - Max | 5.5 V |
Supply Voltage - Min | 4.5 V | Operating Supply Current | 23 mA |
Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 85 C |
Brand | Texas Instruments | Operating Supply Voltage | 5 V |
Product Type | RS-422 Interface IC | Factory Pack Quantity | 2500 |
Subcategory | Interface ICs |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The DS26C32ATMX chip is a quad differential line receiver that converts balanced signals into TTL/CMOS levels. It is commonly used in industrial and communication applications where high noise immunity and long-distance data transmission are required. The chip provides high-speed and high-impedance differential inputs, making it suitable for various data communication protocols.
-
Equivalent
The DS26C32ATMX is a quad differential line driver chip. Equivalent products include the DS26LS32AC, DS26LS32CM, DS26LS32CN, DS26LS32MJ, and DS26LS32MW. These chips are high-speed CMOS compatible devices with the same functionality as the DS26C32ATMX. -
Features
The DS26C32ATMX is a quad differential line receiver with enhanced ESD protection, designed to meet the requirements of RS-422 and RS-485 systems. It features a wide common-mode input range, high differential input voltage thresholds, and is equipped with a failsafe circuit to ensure a known output state when inputs are idle. -
Pinout
The DS26C32ATMX is a 16-pin quad differential line driver. It is used for converting TTL/CMOS level signals into differential outputs for long-distance transmission. It provides complementary output pairs with control inputs for precise signal shaping. -
Manufacturer
The manufacturer of the DS26C32ATMX is Texas Instruments Incorporated. It is a globally recognized semiconductor manufacturing company that designs and manufactures integrated circuits, including specialized digital signal processing, analog, and mixed-signal chips. Texas Instruments produces a wide range of electronic components used in various industries, including automotive, consumer electronics, telecommunications, and industrial equipment. -
Application Field
The DS26C32ATMX is commonly used in applications where high-speed communication and noise immunity are crucial, such as data communication systems, industry-standard RS-422/RS-485 networks, and digital signal transmission in harsh environments. -
Package
The DS26C32ATMX chip is available in SOIC (Small Outline Integrated Circuit) package. The form is surface mount, and the size is typically 0.25" x 0.37" x 0.07" (6.35mm x 9.4mm x 1.75mm).
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits