Microchip DSPIC30F2012-30I/SO

DSPIC30F2012-30I/SO Description générale

The DSPIC30F2012-30I/SO is a versatile 16-bit MCU-DSP product from the dsPIC30F Series, boasting a core frequency of 30MHz and a flash memory size of 12KB. With 20 I/Os and support for I2C, SPI, and UART interfaces, this microcontroller is well-equipped for a variety of applications. Operating within a wide voltage range of 2.5V to 5.5V, it can function smoothly in different power supply conditions. The device's SOIC28 case style and surface mount termination make it easy to integrate into circuit designs. Additionally, meeting RoHS compliance and MSL 1 standards, this product aligns with modern environmental and quality requirements. With an impressive operating temperature range of -40°C to +85°C, the DSPIC30F2012-30I/SO is suitable for use in various settings, from industrial to automotive environments

Caractéristiques

• High-Performance dsPIC30F core
• Modified Harvard architecture
• C compiler optimized instruction set architecture
• 24-bit wide instructions, 16-bit wide data path
• Up to 30 MIPS operation
• DSP Engine for math intensive operations
• Modulo and Bit-Reversed Addressing modes
• Two, 40-bit wide accumulators with optional saturation logic
• 17-bit x 17-bit single cycle hardware fractional/ integer multiplier
• Single cycle Multiply-Accumulate (MAC) operation
• 40-stage Barrel Shifter
• Dual data fetch
• Operating Conditions
• Wide operating voltage range (2.5V to 5.5V)
• Industrial and Extended temperature ranges
• Peripheral Features
• High current sink/source I/O pins: 25 mA/25 mA
• Optionally pair up 16-bit timers into 32-bit timer modules
• 3-wire SPI™ modules (supports 4 Frame modes)
• I2C™ module supports Multi-Master/Slave mode and 7-bit/10-bit addressing
• Addressable UART modules with FIFO buffers and selectable pins
• Analog Features
• 12-bit 200 Ksps Analog-to-Digital Converter (A/D)
• A/D Conversion available during Sleep and Idle
• 1 Sample/Hold
• Multiple Conversion Sequencing Options
• Special Microcontroller Features
• Enhanced Flash program memory with 10,000 erase/write cycle (min.) for industrial temperature range, 100K (typical)
• Data EEPROM memory with 100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical)
• Self-reprogrammable under software control
• Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation
• Fail-Safe clock monitor operation
• Detects clock failure and switches to on-chip low power RC oscillator
• Programmable code protection
• In-Circuit Serial Programming™ (ICSP™)
• Programmable Brown-out Detection and Reset generation
• DC to 40 MHz external clock input
• Internal FRC input with PLL active (4x, 8x, 16x)
• 4 MHz-10 MHz oscillator input with PLL active (4x, 8x, 16x)
• 10 MHz - 20 MHz oscillator input in HS/2 or HS/3 with PLL active (4x, 8x, 16x)
• Sleep, Idle and Alternate Clock modes for power management

Caractéristiques