Commandes de plus de
$5000LCMXO2-7000HC-4FG484C
High capacity FPGA
Marques: Lattice Semiconductor Corporation
Pièce Fabricant #: LCMXO2-7000HC-4FG484C
Fiche de données: LCMXO2-7000HC-4FG484C Fiche de données (PDF)
Colis/Caisse: 484-BBGA
type de produit: FPGAs (Field Programmable Gate Array)
Statut RoHS:
État des stocks: 9 754 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
LCMXO2-7000HC-4FG484C Description générale
Designed for high levels of integration and flexibility, the LCMXO2-7000HC-4FG484C from Lattice Semiconductor is a low-power, low-cost, and high-performance FPGA that embodies versatility. Offering 7000 LUTs and 128 Kbits of embedded memory, this FPGA is well-equipped to handle a wide range of applications. Its 208 user I/Os facilitate seamless interfacing with other system components, while its low voltage operation at 1.2V ensures energy efficiency, making it an excellent choice for battery-operated devices. With fast I/O performance of up to 300 MHz, the LCMXO2-7000HC-4FG484C also delivers high-speed data processing capabilities. And with its compact 484-pin FBGA package, this FPGA is not only powerful and efficient but also easy to integrate into various designs. Whether you're designing for communications, industrial, or consumer electronics, the LCMXO2-7000HC-4FG484C is the reliable and flexible FPGA solution you need
Caractéristiques
- Flexible Logic Architecture
- Six devices with 256 to 6864 LUT4s and 19 to 335 I/Os
- Ultra Low Power Devices
- Advanced 65 nm low power process
- As low as 19 µW standby power
- Programmable low swing differential I/Os
- Stand-by mode and other power saving options
- Embedded and Distributed Memory
- Up to 240 Kbits sysMEM™ Embedded Block RAM
- Up to 54 Kbits Distributed RAM
- Dedicated FIFO control logic On-Chip User Flash Memory
- Up to 256 Kbits of User Flash Memory
- 100,000 write cycles
- Accessible through WISHBONE, SPI, I2C and JTAG interfaces
- Can be used as soft processor PROM or as Flash memory
- Pre-Engineered Source Synchronous I/O
- DDR registers in I/O cells
- Dedicated gearing logic
- 7:1 Gearing for Display I/Os
- Generic DDR, DDRX2, DDRX4
- Dedicated DDR/DDR2/LPDDR memory with DQS support
- High Performance, Flexible I/O Buffer
- Programmable sysIO™ buffer supports wide range of interfaces:
- – LVCMOS 3.3/2.5/1.8/1.5/1.2
- – LVTTL
- –PCI
- – LVDS, Bus-LVDS, MLVDS, RSDS, LVPECL
- – SSTL 25/18
- – HSTL 18
- – Schmitt trigger inputs, up to 0.5V hysteresis
- I/Os support hot socketing
- On-chip differential termination
- Programmable pull-up or pull-down mode
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Series | MachXO2 | Package | Tray |
Product Status | Active | Programmabe | Not Verified |
Number of LABs/CLBs | 858 | Number of Logic Elements/Cells | 6864 |
Total RAM Bits | 245760 | Number of I/O | 334 |
Voltage - Supply | 2.375V ~ 3.465V | Mounting Type | Surface Mount |
Operating Temperature | 0°C ~ 85°C (TJ) | Package / Case | 484-BBGA |
Supplier Device Package | 484-FBGA (23x23) |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits