Microchip MCP23017-E/SO
I/O Expander 16 I2C 1.7 MHz 28-SOIC
Marques: MICROCHIP
Pièce Fabricant #: MCP23017-E/SO
Fiche de données: MCP23017-E/SO Fiche de données (PDF)
Colis/Caisse: SOP28
type de produit: Interface - I/O Expanders
Statut RoHS:
État des stocks: 5406 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureMCP23017-E/SO Description générale
The MCP23017/MCP23S17 (MCP23X17) devicefamily provides 16-bit, general purpose parallel I/Oexpansion for I2C bus or SPI applications. The twodevices differ only in the serial interface:
• MCP23017 – I2C interface
• MCP23S17 – SPI interface
The MCP23X17 consists of multiple 8-bit configurationregisters for input, output and polarity selection. Thesystem master can enable the I/Os as either inputs oroutputs by writing the I/O configuration bits (IODIRA/B).The data for each input or output is kept in thecorresponding input or output register. The polarity ofthe Input Port register can be inverted with the PolarityInversion register. All registers can be read by thesystem master.
The 16-bit I/O port functionally consists of two 8-bitports (PORTA and PORTB). The MCP23X17 can beconfigured to operate in the 8-bit or 16-bit modes viaIOCON.BANK.There are two interrupt pins, INTA and INTB, that canbe associated with their respective ports, or can belogically OR’ed together so that both pins will activate ifeither port causes an interrupt.The interrupt output can be configured to activateunder two conditions (mutually exclusive):
1. When any input state differs from itscorresponding Input Port register state. This isused to indicate to the system master that aninput state has changed.
2. When an input state differs from a preconfigured register value (DEFVAL register).
The Interrupt Capture register captures port values atthe time of the interrupt, thereby saving the conditionthat caused the interrupt.The Power-on Reset (POR) sets the registers to theirdefault values and initializes the device state machine.The hardware address pins are used to determine thedevice address.
Caractéristiques
- 16-bit input/output port expander with interrupt output
- Cascadable for up to 8 devices on one bus
- 25mA sink/source capability per I/O
- Supports 100kHz, 400kHz and 1.7MHz I2C™Compatible compatible modes
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Product Category | Interface - I/O Expanders | RoHS | Details |
Series | MCP23017 | Mounting Style | SMD/SMT |
Package / Case | SOIC-28 | Interface Type | I2C, Serial |
Number of I/Os | 16 I/O | Interrupt Output | With Interrupt |
Supply Voltage - Min | 1.8 V | Supply Voltage - Max | 5.5 V |
Maximum Clock Frequency | 1.7 MHz | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 125 C | ESD Protection | 4 kV |
Brand | Microchip Technology | Input Voltage | 1.8 V to 5.5 V |
Logic Family | MCP23017 | Logic Type | I/O Expander |
Moisture Sensitive | Yes | Operating Supply Voltage | 1.8 V to 5.5 V |
Output Current | 25 mA | Output Voltage | 1.8 V to 4.5 V |
Pd - Power Dissipation | 700 mW | Product | I/O Expanders |
Product Type | I/O Expanders | Propagation Delay Time | 50 ns |
Factory Pack Quantity | 27 | Subcategory | Interface ICs |
Type | I/O Expander |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The MCP23017-E/SO is an I/O expander chip that allows for the expansion of input and output capabilities of a microcontroller. It provides an additional 16 digital I/O pins, which can be configured as inputs or outputs. The chip communicates with the microcontroller through I2C interface, making it easy to connect multiple chips using only two wires. It is commonly used in applications where the microcontroller has limited I/O pins.
-
Equivalent
Equivalent products of the MCP23017-E/SO chip include the MCP23017-I/SO and MCP23S17-I/SO from Microchip Technology. These chips have similar specifications and functionality, including 16-bit input/output (I/O) capabilities, internal pull-up resistors, and interrupt-on-change features. -
Features
The MCP23017-E/SO is a 16-bit I/O expander with serial interface designed to provide additional I/O ports for microcontrollers. It features two 8-bit ports that can be independently configured as inputs or outputs, providing a total of 16 I/O pins. Additionally, it supports interrupt-on-change and can be cascaded with other MCP23017 devices for even more I/O capabilities. -
Pinout
The MCP23017-E/SO is a 28-pin integrated circuit (IC) with 16 I/O pins. Its function is to provide additional I/O ports for microcontrollers or other devices. It can be configured as inputs or outputs, and can be controlled through the I2C bus interface. -
Manufacturer
The MCP23017-E/SO is manufactured by Microchip Technology Inc., which is an American company specializing in the production of microcontrollers and other semiconductor products. -
Application Field
The MCP23017-E/SO is a general-purpose I/O expander that can be used in various application areas including industrial automation, home automation, robotics, and electronic projects. With its 16 programmable I/O pins, it provides additional digital inputs and outputs, enabling increased functionality and flexibility in controlling and monitoring various devices and sensors. -
Package
The MCP23017-E/SO chip is in a small outline (SO) package type with a surface mount (SMT) form. It measures 5.30mm x 2.00mm x 1.75mm.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits