Microchip MCP2515-E/ST
1Mbps Data Rate
Marques: Microchip Technology, Inc
Pièce Fabricant #: MCP2515-E/ST
Fiche de données: MCP2515-E/ST Datasheet (PDF)
Colis/Caisse: TSSOP-20
Statut RoHS:
État des stocks: 2980 pièces, nouveau original
type de produit: CI d'interface
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Tous les prix sont en USD
Qté | Prix unitaire | Prix ext |
---|---|---|
1 | $1,925 | $1,925 |
10 | $1,684 | $16,840 |
30 | $1,534 | $46,020 |
100 | $1,341 | $134,100 |
500 | $1,271 | $635,500 |
1000 | $1,241 | $1241,000 |
In Stock:2980 PCS
MCP2515-E/ST Description générale
The MCP2515-E/ST is a standalone CAN controller with SPI interface, designed for use in automotive and industrial applications. It features an integrated CAN controller and CAN transceiver, allowing for easy interfacing with CAN networks.This device supports both standard (11-bit) and extended (29-bit) data and remote frames. It also includes 2 receive buffers with prioritized message storage, as well as 3 transmit buffers with prioritized transmission scheduling.The MCP2515-E/ST operates on a wide voltage range of 2.7V to 5.5V and has a standby current of only 5μA, making it suitable for low-power applications. It is also capable of baud rates up to 1 Mbps.Additionally, the MCP2515-E/ST has various error detection and fault handling features, such as cyclic redundancy check (CRC) support and error flags for error detection and reporting. It is available in a compact 20-pin SOIC package for easy integration into designs
Caractéristiques
Application
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Bitrate Max [MBits/s] | 1 | CAN Controllers | 1 |
Internal CAN Clock | No | LPM Current Max [uA] | 0 |
Message RAM [KB] | 0 | Operating Voltage Min. [V] | 2.7 |
Operating Voltage Max. [V] | 5.5 | Rx Buffers | 2 |
SPI Interface | Yes | Serial Bus Speed [MHz] | 10 |
Standby Current Max [uA] | 0 | Operating Temperature Min. [°C] | -40 |
Operating Temperature Max. [°C] | 125 | Time Stamp (Bits) | 0 |
TX Buffers | 3 | TX Event FIFO | 0 |
TX Queue | 0 |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The MCP2515-E/ST chip is a stand-alone CAN controller with a SPI interface that simplifies CAN network integration. It provides support for CAN V2.0B protocol specifications, offering features like baud rate configurations, mask and filter modes, error detection, and message transmission/reception. With its compact size and powerful capabilities, the MCP2515-E/ST chip is widely used in automotive and industrial applications for efficient communication and control within CAN networks.
-
Equivalent
Some equivalent products of the MCP2515-E/ST chip include the MCP2515-I/ST, MCP2515-E/SL, and MCP2515-I/SL. These are variations of the MCP2515 chip that offer similar features and functionality. -
Features
The MCP2515-E/ST is a standalone CAN controller that supports both CAN 2.0B and 1.2 protocols. It has an SPI interface, 16MHz clock speed, and operates at a wide temperature range. The device can be used in various automotive and industrial applications, providing efficient message filtering, transmit/receive buffers, and error detection capabilities. -
Pinout
The MCP2515-E/ST is an 18-pin integrated circuit that serves as a CAN (Controller Area Network) controller. It supports CAN V2.0B and CAN FD protocols. The pin count and function of the MCP2515-E/ST include power supply, crystal oscillator, CAN bus interface, digital I/O, and SPI (Serial Peripheral Interface) communication. -
Manufacturer
The MCP2515-E/ST is manufactured by Microchip Technology Inc. It is an American company that designs and produces microcontrollers, semiconductors, and various other electronic components for a wide range of applications. -
Application Field
The MCP2515-E/ST is commonly used in applications involving CAN communication, such as automotive systems, industrial automation, and medical devices. It is used to interface microcontrollers or other devices with a CAN bus, allowing for communication and control between different components in a system. -
Package
The MCP2515-E/ST chip is available in a SOIC (Small Outline Integrated Circuit) package type. The form is surface mount, and the size is 8.75 mm x 4.4 mm.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits
Our business has saved a significant amount of money thanks to Ovaga's competitive pricing and reliable services.