NXP MMC2107CFCAG33
32-bit Microcontrollers - MCU 32 Bit 33MHz
Marques: NXP
Pièce Fabricant #: MMC2107CFCAG33
Fiche de données: MMC2107CFCAG33 Fiche de données (PDF)
Colis/Caisse: LQFP-144
type de produit: 32-bit Microcontrollers - MCU
Statut RoHS:
État des stocks: 6554 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureMMC2107CFCAG33 Description générale
M210 MCore Microcontroller IC 16/32-Bit 33MHz 128KB (128K x 8) FLASH 144-LQFP (20x20)
Caractéristiques
- Features of the MMC2107 include:
- MCORE M210 integer processor:
- – 32-bit reduced instruction set computer (RISC) architecture
- – Low power and high performance
- OnCE™ debug support
- On-chip 128-Kbyte FLASH:
- – Motorola’s one transistor, CDR MoneT(1) FLASH bit cell
- – Page mode (2111) read access
- – External VPP required for programming
- – 16-K block size
- On-chip, 8-Kbyte static random-access memory (SRAM):
- – One clock per access (including bytes, half-words, and words)
- – Byte, half-word (16 bits), and word (32 bits) read/write accesses
- – Standby power supply support
- Serial peripheral interface (SPI):
- – Master mode and slave mode
- – Wired-OR mode
- – Slave select output
- – Mode fault error flag with CPU interrupt capability
- – Double-buffered operation
- – Serial clock with programmable polarity and phase
- – Control of SPI operation during wait mode
- – Reduced drive control
- Two serial communications interfaces (SCI):
- – Full-duplex operation
- – Standard mark/space non-return-to-zero (NRZ) format
- – 13-bit baud rate selection
- – Programmable 8-bit or 9-bit data format
- – Separately enabled transmitter and receiver
- – Separate receiver and transmitter CPU interrupt requests
- – Programmable transmitter output polarity
- – Two receiver wakeup methods (idle line and address mark)
- – Interrupt-driven operation with eight flags
- – Receiver framing error detection
- – Hardware parity checking
- – 1/16 bit-time noise detection
- – General-purpose input/output port
- Two timers:
- – Four 16-bit input capture/output compare channels
- – 16-bit architecture
- – 16-bit pulse accumulator
- – Pulse widths variable from microseconds to seconds
- – Prescaler
- – Toggle-on-overflow feature for pulse-width modulator (PWM) generation
- – Timer port pullups enabled on reset
- Queued analog-to-digital converter (QADC):
- – Eight analog input channels
- – 10-bit resolution ±2 counts accuracy
- – Minimum 7 µs conversion time
- – Internal sample and hold
- – Programmable input sample time for various source impedances
- – Two conversion command queues with a total of 64 entries
- – Subqueues possible using pause mechanism
- – Queue complete and pause software interrupts available on both queues
- – Queue pointers indicate current location for each queue
- – Automated queue modes initiated by:
- External edge trigger and gated trigger
- Periodic/interval timer, within queued analog-to-digital converter (QADC) module {queue1 and queue2}
- Software command
- – Single-scan or continuous-scan of queues
- – Output data readable in three formats:
- Right-justified unsigned
- Left-justified signed
- Left-justified unsigned
- – Unused analog channels can be used as digital input/output (I/O)
- – Minimum pin set configuration implemented (Continue)
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Manufacturer | NXP | Product Category | 32-bit Microcontrollers - MCU |
RoHS | Details | Series | MMC2107 |
Mounting Style | SMD/SMT | Package / Case | LQFP-144 |
Core | M-CORE | Program Memory Size | 128 kB |
Data RAM Size | 8 kB | Data Bus Width | 32 bit |
Maximum Clock Frequency | 33 MHz | Number of I/Os | 72 I/O |
Supply Voltage - Min | 2.7 V | Supply Voltage - Max | 3.6 V |
Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 85 C |
Packaging | ["Tray"] | Brand | NXP Semiconductors |
Data ROM Size | 128 kB | Data ROM Type | Flash/EEPROM |
Height | 1.4 mm | Interface Type | SCI, SPI |
Length | 20 mm | Moisture Sensitive | Yes |
Number of Timers/Counters | 2 Timer | Processor Series | MMC2107 |
Product Type | 32-bit Microcontrollers - MCU | Program Memory Type | EEPROM, Flash |
Factory Pack Quantity | 300 | Subcategory | Microcontrollers - MCU |
Width | 20 mm |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
MMC2107CFCAG33 is a chip used in automotive applications. It is designed to provide accurate sensing and measurement of various parameters such as acceleration, inclination, and vibration. It offers high performance and robustness, making it suitable for demanding automotive environments. The chip incorporates advanced features and interfaces that facilitate easy integration into vehicle systems, enabling better control and safety.
-
Equivalent
There are no direct equivalent products for the MMC2107CFCAG33 chip. However, alternative options for similar functions may include the STM32F103C8T6 or the ATSAM3X8E microcontrollers. It is recommended to consult the datasheets of these options to identify the best fit for specific requirements. -
Features
The MMC2107CFCAG33 is a micro-electromechanical system (MEMS) accelerometer that offers high accuracy, low noise, and a built-in temperature sensor. It has a measurement range of ±2 g and provides digital output through a serial peripheral interface (SPI). The device is designed for applications requiring precise motion sensing and vibration monitoring. -
Pinout
The MMC2107CFCAG33 is a Microchip Technology accelerometer sensor with a pin count of 16. The function of the device is to measure acceleration and provide the corresponding outputs. -
Application Field
The MMC2107CFCAG33 is a 3-axis magnetic field sensor suitable for applications such as industrial control systems, robotics, and navigation systems. It can be used for position sensing, motion detection, and magnetic field measurement in various electronic devices and equipment. -
Package
The MMC2107CFCAG33 chip is packaged in a ceramic flip-chip form with a size of 5 x 5 mm.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits