Ce site web utilise des cookies. En utilisant ce site, vous consentez à l'utilisation de cookies. Pour plus d'informations, veuillez consulter notre politique de confidentialité.

Microchip PIC18F46K42-I/PT

PIC PIC® XLP™ 18K Microcontroller IC 8-Bit 64MHz 64KB (32K x 16) FLASH 44-TQFP (10x10)

ISO14001 ISO9001 DUNS

Marques: Microchip Technology, Inc

Pièce Fabricant #: PIC18F46K42-I/PT

Fiche de données: PIC18F46K42-I/PT Datasheet (PDF)

Colis/Caisse: TQFP-44

type de produit: Processeurs et contrôleurs intégrés

Statut RoHS:

État des stocks: 2134 pièces, nouveau original

Warranty: 1 Year Ovaga Warranty - Find Out More

Ajouter à la nomenclature

Citation courte

Veuillez soumettre une demande de prix pour PIC18F46K42-I/PT ou envoyez-nous un email: E-mail: [email protected], nous vous contacterons dans les 12 heures.

PIC18F46K42-I/PT Description générale

8-bit Microcontrollers - MCU 64KB Flash, 4KB RAM, 1KB EEPROM, 12-bit ADC2, Vector Interrupts, DMA, MAP, DIA, DAC, Comp, PWM, CWG, HLT, WWDT, SCAN/CRC, ZCD, PPS, UART, SPI/I2C, IDLE/DOZE/PMD

Caractéristiques

  • Interrupt Vector Table
  • Programmable single or dual priority
  • Two level hardware context saving
  • Eliminates need for CPU involvement in data transfers
  • Access to all memory spaces and peripherals
  • Flexible source and destination message sizes
  • Programmable DMA priority
  • Memory Access Partition (MAP) - Customize flash partitioning with bootloader write protection
  • Device Information Area (DIA) - Dedicated memory area for data storage of temp sensor factory calibration value, factory ID and FVR values for ADC and COMP
  • WDT: 500nA @ 1.8V typical
  • SLEEP mode: 50nA @ 1.8V typical
  • DOZE mode allows CPU to run at a lower clock speed than peripherals
  • IDLE and SLEEP modes selectively shut down peripherals and/or core for power reduction
  • Averaging, filter calculations, oversampling and threshold comparison (ADCC)
  • Automates touch sampling and reduces software size and CPU usage when touch or proximity sensing is required (ADCC)
  • 5-bit resolution, rail-to-rail (DAC)
  • Unbuffered I/O pin output
  • Comparator hysteresis enable
  • Invert output polarity
  • Fixed Voltage Reference (FVR) module - 1.024V, 2.048V and 4.096V output levels
  • Senses high voltage AC signal (ZCD)
  • Generates interrupts on zero cross (ZCD)
  • DMA compatible
  • Asynchronous UART, RS-232, RS-485 compatible
  • Programmable 1, 1.5, 2 stop bits
  • Configurable length bytes
  • Arbitrary length data packets
  • Separate transmit and receive buffers with 2-byte FIFO and DMA capabilities
  • SMBus, PMBUSTM compatible
  • In-Circuit Debug Integrated On-Chip
  • In-Circuit Serial Programing (ICSP) via Two Pins
Microchip Technology, Inc Inventory

Caractéristiques

Paramètre Valeur Paramètre Valeur
Source Content uid PIC18F46K42-I/PT Rohs Code Yes
Part Life Cycle Code Active Ihs Manufacturer MICROCHIP TECHNOLOGY INC
Package Description TQFP-44 Reach Compliance Code compliant
ECCN Code EAR99 HTS Code 8542.31.00.01
Factory Lead Time 47 Weeks Date Of Intro 2017-06-16
Samacsys Manufacturer Microchip Has ADC YES
Address Bus Width Bit Size 8
Boundary Scan NO CPU Family PIC18
Clock Frequency-Max 64 MHz DAC Channels YES
DMA Channels YES External Data Bus Width
Format FIXED POINT Integrated Cache NO
JESD-30 Code S-PQFP-G44 JESD-609 Code e3
Length 10 mm Low Power Mode YES
Number of DMA Channels 2 Number of External Interrupts 3
Number of I/O Lines 36 Number of Serial I/Os 2
Number of Terminals 44 Number of Timers 7
On Chip Data RAM Width 8 On Chip Program ROM Width 16
Operating Temperature-Max 85 °C Operating Temperature-Min -40 °C
PWM Channels YES Package Body Material PLASTIC/EPOXY
Package Code TQFP Package Equivalence Code TQFP44,.39SQ,31
Package Shape SQUARE Package Style FLATPACK, THIN PROFILE
RAM (bytes) 4096 RAM (words) 4096
ROM (words) 32768 ROM Programmability FLASH
Seated Height-Max 1.2 mm Speed 64 MHz
Supply Current-Max 18 mA Supply Voltage-Max 5.5 V
Supply Voltage-Min 2.7 V Supply Voltage-Nom 3 V
Surface Mount YES Technology CMOS
Temperature Grade INDUSTRIAL Terminal Finish MATTE TIN
Terminal Form GULL WING Terminal Pitch 0.8 mm
Terminal Position QUAD Width 10 mm
uPs/uCs/Peripheral ICs Type MICROCONTROLLER, RISC feature-tradename
feature-data-bus-width-bit 8 feature-interface-type I2C/SPI/UART
feature-minimum-operating-supply-voltage-v 2.3 feature-maximum-operating-supply-voltage-v 5.5
feature-packaging feature-rad-hard
feature-pin-count 44 feature-supplier-package TQFP
feature-standard-package-name1 QFP feature-cecc-qualified
feature-esd-protection feature-escc-qualified
feature-military No feature-aec-qualified No
feature-aec-qualified-number feature-auto-motive No
feature-p-pap No feature-eccn-code 3A991a.2.
feature-svhc No

Expédition

Type d'expédition Frais d'expédition Délai de mise en œuvre
DHL DHL $20.00-$40.00 (0.50 KG) 2-5 jours
Fedex FedEx $20.00-$40.00 (0.50 KG) 2-5 jours
UPS UPS $20.00-$40.00 (0.50 KG) 2-5 jours
TNT TNT $20.00-$40.00 (0.50 KG) 2-5 jours
EMS EMS $20.00-$40.00 (0.50 KG) 2-5 jours
LA POSTE AÉRIENNE ENREGISTRÉE LA POSTE AÉRIENNE ENREGISTRÉE $20.00-$40.00 (0.50 KG) 2-5 jours

Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.

Paiement

Modalités de paiement Frais de main
Virement bancaire Virement bancaire facturer des frais bancaires de 30,00 $ US.
Pay Pal Pay Pal facturer des frais de service de 4,0 %.
Carte de crédit Carte de crédit facturez des frais de service de 3,5%.
Western union Western union charge US.00 banking fee.
Paiement de Petit Montant Paiement de Petit Montant facturer des frais bancaires de 0,00 $ US.

Garanties

1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.

2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.

Emballage

  • Produit

    Étape1 :Produit

  • Emballage sous vide

    Étape2 :Emballage sous vide

  • Sac antistatique

    Étape3 :Sac antistatique

  • Emballage individuel

    Étape4 :Emballage individuel

  • Boîtes d'emballage

    Étape5 :Boîtes d'emballage

  • étiquette d'expédition à code-barres

    Étape6 :étiquette d'expédition à code-barres

Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.

L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.

Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.

Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.

  • ESD
  • ESD

Points de pièce

  • The PIC18F46K42-I/PT chip is a high-performance 8-bit microcontroller from Microchip Technology that features enhanced flash memory, rich peripherals, and improved analog features for various embedded applications. It has a versatile array of communication interfaces, advanced PWM modules, and low-power consumption capabilities, making it suitable for a range of industrial, automotive, and consumer electronics applications.
  • Equivalent

    Some equivalent products to the PIC18F46K42-I/PT chip include PIC18F46K42-E/PT, PIC18F46K42-E/PTG, PIC18F46K42-E/PT, and PIC18F46K42-I/PTG. These chips have similar specifications and functionalities, making them suitable alternatives for a variety of applications.
  • Features

    The PIC18F46K42-I/PT is a high-performance, 8-bit microcontroller from Microchip Technology. It features a 64 KB flash memory, 4 KB SRAM, up to 64 MHz operating frequency, and advanced peripherals such as ADC, PWM, and USART. It also offers low power consumption, EUSART, and USB connectivity for enhanced communication capabilities.
  • Pinout

    The PIC18F46K42-I/PT is a 40-pin microcontroller with 33 I/O pins, 3 input-only pins, and 4 output-only pins. It also features communication peripherals such as SPI, I2C, and UART, as well as analog-to-digital converters. This microcontroller is commonly used in various industrial and consumer applications.
  • Manufacturer

    The manufacturer of the PIC18F46K42-I/PT is Microchip Technology Inc. Microchip Technology is a leading provider of microcontroller, mixed-signal, analog and Flash-IP solutions. The company designs and manufactures a wide range of semiconductor products used in various applications such as automotive, industrial, consumer, and communication devices.
  • Application Field

    The PIC18F46K42-I/PT microcontroller is commonly used in various applications such as industrial control systems, automotive electronics, home automation systems, medical devices, and consumer electronics. Its high performance, low power consumption, and rich set of peripherals make it suitable for a wide range of embedded applications.
  • Package

    The PIC18F46K42-I/PT chip is a 44-pin TQFP package with a form factor of 10mm x 10mm and a size of 7mm x 7mm.

Fiche de données PDF

Spécification préliminaire PIC18F46K42-I/PT PDF Télécharger

Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente

  • Produit

    Nous avons des produits riches, pouvons répondre à vos différents besoins.

  • quantity

    La quantité minimum de commande commence à partir de 1 pièce.

  • shipping

    Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $

  • garantie

    Garantie de qualité de 365 jours pour tous les produits

Notes et avis

Notes
Veuillez évaluer le produit !
Merci de saisir un commentaire

Veuillez soumettre vos commentaires après vous être connecté à votre compte.

Soumettre

Recommander