ST STM32F100R8T6B
ARM Microcontrollers - MCU Low Medium Value Line Advanced ARM
Marques: ST
Pièce Fabricant #: STM32F100R8T6B
Fiche de données: STM32F100R8T6B Datasheet (PDF)
Colis/Caisse: LQFP-64
Statut RoHS:
État des stocks: 2502 pièces, nouveau original
type de produit: Processeurs et contrôleurs intégrés
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Tous les prix sont en USD
Qté | Prix unitaire | Prix ext |
---|---|---|
1 | $3,238 | $3,238 |
10 | $3,078 | $30,780 |
30 | $2,981 | $89,430 |
100 | $2,645 | $264,500 |
500 | $2,601 | $1300,500 |
1000 | $2,580 | $2580,000 |
In Stock:2502 PCS
STM32F100R8T6B Description générale
The STM32F100x4, STM32F100x6, STM32F100x8 and STM32F100xB microcontrollers incorporate the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 24 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 8 Kbytes), and an extensive range of enhanced peripherals and I/Os connected to two APB buses. All devices offer standard communication interfaces (up to two I2Cs, two SPIs, one HDMI CEC, and up to three USARTs), one 12-bit ADC, two 12-bit DACs, up to six general-purpose 16-bit timers and an advanced-control PWM timer.The STM32F100xx low- and medium-density devices operate in the – 40 to + 85 °C and – 40 to + 105 °C temperature ranges, from a 2.0 to 3.6 V power supply.A comprehensive set of power-saving mode allows the design of low-power applications.These microcontrollers include devices in three different packages ranging from 48 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included.These features make these microcontrollers suitable for a wide range of applications such as application control and user interfaces, medical and hand-held equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.Discovery kit with STM32F100RB MCU.ST-LINK/V2 in-circuit debugger/programmer for ST.Low power motor control board featuring the SLLI.
Caractéristiques
- Core: ARM®32-bit Cortex®-M3 CPU
- 24 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance
- Single-cycle multiplication and hardware division
- Memories
- 16 to 128 Kbytes of Flash memory
- 4 to 8 Kbytes of SRAM
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR and programmable voltage detector (PVD)
- 4-to-24 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC
- PLL for CPU clock
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBATsupply for RTC and backup registers
- Debug mode
- Serial wire debug (SWD) and JTAG interfaces
- DMA
- 7-channel DMA controller
- Peripherals supported: timers, ADC, SPIs, I2Cs, USARTs and DACs
- 1 × 12-bit, 1.2 μs A/D converter (up to 16 channels)
- Conversion range: 0 to 3.6 V
- Temperature sensor
- 2 × 12-bit D/A converters
- Up to 80 fast I/O ports
- 37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Up to 12 timers
- Up to three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter
- 16-bit, 6-channel advanced-control timer: up to 6 channels for PWM output, dead time generation and emergency stop
- One 16-bit timer, with 2 IC/OC, 1 OCN/PWM, dead-time generation and emergency stop
- Two 16-bit timers, each with IC/OC/OCN/PWM, dead-time generation and emergency stop
- 2 watchdog timers (Independent and Window)
- SysTick timer: 24-bit downcounter
- Two 16-bit basic timers to drive the DAC
- Up to 8 communications interfaces
- Up to two I2C interfaces (SMBus/PMBus)
- Up to 3 USARTs (ISO 7816 interface, LIN,
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Supply Voltage Min Volt | 2.0 | Supply Voltage Max Volt | 3.6 |
Operating Temp Min Celsius | -40.0 | Operating Temp Max Celsius | 85.0 |
Core | Arm Cortex-M3 | ECCN US | EAR99 |
ECCN EU | NEC | Packing Type | Tray |
RoHs compliant | Ecopack2 | Grade | Industrial |
Package Name | LQFP 64 10x10x1.4 mm |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The STM32F100R8T6B is a microcontroller chip from the STM32F1 series developed by STMicroelectronics. It features a 32-bit ARM Cortex-M3 processor core, with 64 KB of flash memory and 8 KB of RAM. It offers a range of peripherals, including GPIO, UART, SPI, I2C, ADC, and timers, making it suitable for various applications in embedded systems and IoT devices.
-
Equivalent
Some equivalent products of the STM32F100R8T6B chip are STM32F100R4T6B, STM32F100R6T6B, STM32F100R8T6, and STM32F100R8T6TR. These chips belong to the same STM32F100 series, have similar specifications, and provide similar functionalities. -
Features
The STM32F100R8T6B microcontroller features a 32-bit ARM Cortex-M3 core operating at a maximum frequency of 24 MHz. It has 64 KB of Flash memory and 8 KB of RAM, along with various communication interfaces such as UART, SPI, I2C, and USB. It also includes multiple timers, ADC channels, and GPIO pins for versatile applications. -
Pinout
The STM32F100R8T6B is a microcontroller with 64 pins. It is part of the STM32F1 series from STMicroelectronics. It offers 8KB of RAM, 64KB of Flash memory, and various communication interfaces such as I2C, UART, and SPI. Its pin count and functions make it suitable for various embedded applications. -
Manufacturer
STMicroelectronics is the manufacturer of the STM32F100R8T6B. It is a multinational electronics and semiconductor company based in Switzerland. STMicroelectronics specializes in developing and delivering a broad range of advanced semiconductor solutions, including microcontrollers like the STM32 series, to customers worldwide across various industries. -
Application Field
The STM32F100R8T6B microcontroller can be used in various application areas, including industrial control systems, consumer electronics, home automation, communication devices, and automotive systems. It offers a range of advanced features and interfaces, making it suitable for a wide range of applications requiring embedded control and processing capabilities. -
Package
The STM32F100R8T6B chip is in a LQFP package type, with 64 pins.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits
Ovaga's components are essential to the success of my business.