Les images sont à titre de référence uniquement. Voir les spécifications du produit
ST STM32F100RCT6B
ARM Microcontrollers - MCU ARM 32Bit Value Line 64-Pin 32kB Flash
Marques: ST
Pièce Fabricant #: STM32F100RCT6B
Fiche de données: STM32F100RCT6B Datasheet (PDF)
Colis/Caisse: LQFP64
type de produit: Processeurs et contrôleurs intégrés
Statut RoHS:
État des stocks: 2844 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureSTM32F100RCT6B Description générale
The STM32F100xx value line family incorporates the high-performance Arm® Cortex®-M3 32-bit RISC core operating at a 24 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 32 Kbytes), a flexible static memory control (FSMC) interface (for devices offered in packages of 100 pins and more) and an extensive range of enhanced peripherals and I/Os connected to two APB buses. All devices offer standard communication interfaces (up to two I2Cs, three SPIs, one HDMI CEC, up to three USARTs and 2 UARTS), one 12-bit ADC, two 12-bit DACs, up to 9 general-purpose 16-bit timers and an advanced-control PWM timer.The STM32F100xx high-density value line family operates in the –40 to +85 °C and –40 to +105 °C temperature ranges, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F100xx value line family includes devices in three different packages ranging from 64 pins to 144 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.These features make the STM32F100xx value line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.ST-LINK/V2 in-circuit debugger/programmer for ST.Low power motor control board featuring the SLLI.Discovery kit with STM32F100RB MCU.
Caractéristiques
- Core: Arm® 32-bit Cortex®-M3 CPU
- 24 MHz maximum frequency, 1.25 DMIPS /MHz (Dhrystone 2.1) performance
- Single-cycle multiplication and hardware division
- Memories
- 256 to 512 Kbytes of Flash memory
- 24 to 32 Kbytes of SRAM
- Flexible static memory controller with 4 Chip Selects. Supports SRAM, PSRAM and NOR memories
- LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR and programmable voltage detector (PVD)
- 4-to-24 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC
- PLL for CPU clock
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- Serial wire debug (SWD) and JTAG I/F
- DMA
- 12-channel DMA controller
- Peripherals supported: timers, ADC, SPIs, I2Cs, USARTs and DACs
- 1 × 12-bit, 1.2 μs A/D converter (up to 16 ch.)
- Conversion range: 0 to 3.6 V
- Temperature sensor
- 2 × 12-bit D/A converters
- Up to 112 fast I/O ports
- 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Up to 16 timers
- Up to seven 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter
- One 16-bit, 6-channel advanced-control timer: up to 6 channels for PWM output, dead time generation and emergency stop
- One 16-bit timer, with 2 IC/OC, 1 OCN/PWM, dead-time generation and emergency stop
- Two 16-bit timers, each with IC/OC/OCN/PWM, dead-time generation and emergency stop
- Two watchdog timers
- SysTick timer: 24-bit downcounter
- Two 16-bit basic timers to drive the DAC
- Up to 11 communications interfaces
- Up to tw
Caractéristiques
| Paramètre | Valeur | Paramètre | Valeur |
|---|---|---|---|
| Supply Voltage Min Volt | 2.0 | Supply Voltage Max Volt | 3.6 |
| Operating Temp Min Celsius | -40.0 | Operating Temp Max Celsius | 85.0 |
| Core | Arm Cortex-M3 | ECCN US | EAR99 |
| ECCN EU | NEC | Packing Type | Tray |
| RoHs compliant | Ecopack2 | Grade | Industrial |
| Package Name | LQFP 64 10x10x1.4 mm |
Expédition
| Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
| Modalités de paiement | Frais de main | |
|---|---|---|
 |
Virement bancaire | facturer des frais bancaires de 30,00 $ US. |
 |
Pay Pal | facturer des frais de service de 4,0 %. |
 |
Carte de crédit | facturez des frais de service de 3,5%. |
 |
Western union | charge US.00 banking fee. |
 |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
![Produit]( "Produit")
Étape1 :Produit
-
![Emballage sous vide]( "Emballage sous vide")
Étape2 :Emballage sous vide
-
![Sac antistatique]( "Sac antistatique")
Étape3 :Sac antistatique
-
![Emballage individuel]( "Emballage individuel")
Étape4 :Emballage individuel
-
![Boîtes d'emballage]( "Boîtes d'emballage")
Étape5 :Boîtes d'emballage
-
![étiquette d'expédition à code-barres]( "étiquette d'expédition à code-barres")
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The STM32F100RCT6B chip is a microcontroller based on the ARM Cortex-M3 processor. It is part of STMicroelectronics' STM32F1 series and offers a balance between performance, power efficiency, and cost-effectiveness. The chip includes various peripherals, such as ADC, UART, SPI, I2C, and timers, making it suitable for a wide range of applications, including industrial control, home automation, and consumer electronics.
-
Equivalent
The equivalent products of the STM32F100RCT6B chip include STM32F100C4T6B, STM32F100C8T6B, STM32F100CBT6B, and STM32F100REY6B. -
Features
Some features of STM32F100RCT6B include a 32-bit ARM Cortex-M3 processor running at up to 24 MHz, 128 KB Flash memory, 16 KB RAM, and various communication interfaces such as USART, SPI, and I2C. It also has multiple timers, ADC channels, and GPIO pins for versatile applications. -
Pinout
The STM32F100RCT6B is a microcontroller with a 64-pin count. It belongs to the STM32F1 series and offers various functions, including a 32-bit ARM Cortex-M3 core, flash memory, SRAM, multiple communication interfaces, analog-to-digital converters, timers, and various other peripherals. -
Manufacturer
STMicroelectronics is the manufacturer of the STM32F100RCT6B. It is a global semiconductor company that designs, develops, manufactures, and markets a wide range of products, including microcontrollers like the STM32 series. STMicroelectronics primarily focuses on providing semiconductor solutions for various applications, including automotive, industrial, consumer electronics, and communications. -
Application Field
The STM32F100RCT6B microcontroller is commonly used in a variety of applications, including industrial automation, consumer electronics, medical devices, and automotive systems. Its high-performance capabilities, low power consumption, and rich set of peripherals make it suitable for a wide range of embedded applications. -
Package
The STM32F100RCT6B chip is in a 64-pin LQFP package type. It is in the form of a square with a size of 10mm x 10mm.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
![Produit]( "Produit")
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
![quantity]( "quantity")
La quantité minimum de commande commence à partir de 1 pièce.
-
![shipping]( "shipping")
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
![garantie]( "garantie")
Garantie de qualité de 365 jours pour tous les produits
These electronic components were adequate, but left me wanting more in terms of performance.