ST STM32F101T6U6A
ARM Microcontrollers - MCU 32BIT Cortex M3 L/D Access Line
Marques: STMicroelectronics, Inc
Pièce Fabricant #: STM32F101T6U6A
Fiche de données: STM32F101T6U6A Datasheet (PDF)
Colis/Caisse: QFN-36
type de produit: Processeurs et contrôleurs intégrés
Statut RoHS:
État des stocks: 2315 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureSTM32F101T6U6A Description générale
The STM32F101x4 and STM32F101x6 Low-density access line family incorporates the high-performance ARM Cortex®-M3 32-bit RISC core operating at a 36 MHz frequency, high-speed embedded memories (Flash memory of 16 to 32 Kbytes and SRAM of 4 to 6 Kbytes), and an extensive range of enhanced peripherals and I/Os connected to two APB buses. All devices offer standard communication interfaces (one I2C, one SPI, and two USARTs), one 12-bit ADC and up to two general-purpose 16-bit timers.The STM32F101xx Low-density access line family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F101xx Low-density access line family includes devices in three different packages ranging from 36 pins to 64 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.These features make the STM32F101xx Low-density access line microcontroller family suitable for a wide range of applications such as application control and user interface, medical and handheld equipment, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, Video intercoms, and HVACs.Evaluation board with STM32F103Zx MCU.ST-LINK/V2 in-circuit debugger/programmer for ST.
Caractéristiques
- Core: ARM®32-bit Cortex®-M3 CPU
- 36 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
- Single-cycle multiplication and hardware division
- Memories
- 16 to 32 Kbytes of Flash memory
- 4 to 6 Kbytes of SRAM
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC
- PLL for CPU clock
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- Debug mode
- Serial wire debug (SWD) and JTAG interfaces
- DMA
- 7-channel DMA controller
- Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
- 1 × 12-bit, 1 μs A/D converter (up to 16 channels)
- Conversion range: 0 to 3.6 V
- Temperature sensor
- Up to 51 fast I/O ports
- 26/37/51 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Up to 5 timers
- Up to two16-bit timers, each with up to 4 IC/OC/PWM or pulse counter
- 2 watchdog timers (Independent and Window)
- SysTick timer: 24-bit downcounter
- Up to 4 communication interfaces
- 1 x I2C interface (SMBus/PMBus)
- Up to 2 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
- 1 × SPI (18 Mbit/s)
- CRC calculation unit, 96-bit unique ID
- ECOPACK®packages
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Manufacturer: | STMicroelectronics | Product Category: | ARM Microcontrollers - MCU |
RoHS: | Details | Series: | STM32F101T6 |
Mounting Style: | SMD/SMT | Package / Case: | UFQFPN-36 |
Core: | ARM Cortex M3 | Program Memory Size: | 32 kB |
Data Bus Width: | 32 bit | ADC Resolution: | 12 bit |
Maximum Clock Frequency: | 36 MHz | Number of I/Os: | 26 I/O |
Data RAM Size: | 6 kB | Supply Voltage - Min: | 2 V |
Supply Voltage - Max: | 3.6 V | Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 85 C | Packaging: | Tray |
Brand: | STMicroelectronics | Data RAM Type: | SRAM |
Height: | 0.88 mm | Interface Type: | I2C, SPI, USART |
Length: | 6 mm | Moisture Sensitive: | Yes |
Number of ADC Channels: | 10 Channel | Number of Timers/Counters: | 2 Timer |
Processor Series: | ARM Cortex M | Product Type: | ARM Microcontrollers - MCU |
Program Memory Type: | Flash | Factory Pack Quantity: | 2940 |
Subcategory: | Microcontrollers - MCU | Tradename: | STM32 |
Width: | 6 mm |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The STM32F101T6U6A is a microcontroller chip developed by STMicroelectronics. It belongs to the STM32F1 series of 32-bit ARM Cortex-M3 processors and has a TSSOP20 package. It offers a wide range of features, including a high-performance CPU, various peripherals, ample Flash and RAM memories, and low power consumption. It is commonly used in various applications, such as industrial control systems, consumer electronics, and automotive applications.
-
Equivalent
Some equivalent products of STM32F101T6U6A chip include STM32F101T6U7AL, STM32F101T6U6TR, and STM32F101T6U6AQ microcontrollers. These chips are part of the STM32F1 series and offer similar features and capabilities. -
Features
The STM32F101T6U6A is a microcontroller, featuring a 32-bit ARM Cortex-M3 core, with a clock frequency of up to 72 MHz. It has 64KB flash memory, 16KB RAM, and a wide range of peripherals including timers, communication interfaces, ADCs, and GPIOs. It operates on low power consumption and supports real-time performance. -
Pinout
The STM32F101T6U6A microcontroller has 100 pins. It is a member of the STM32F1 series, based on the ARM Cortex-M3 core. It offers various peripherals and functions such as USART, SPI, I2C, PWM, ADC, and GPIO. -
Manufacturer
The STM32F101T6U6A is manufactured by STMicroelectronics, which is a multinational company that designs and manufactures semiconductor solutions. It is a leading manufacturer of microcontrollers like the STM32 series, offering a wide range of features and functionality for various applications. -
Application Field
The STM32F101T6U6A microcontroller can be used in a variety of application areas, including industrial automation, consumer electronics, medical devices, and automotive systems. It offers high performance, wide connectivity options, and advanced features, making it suitable for various embedded applications that require efficient processing, real-time control, and connectivity capabilities. -
Package
The STM32F101T6U6A chip has a LQFP package type, a 100-pin form, and a size of 14x14 mm.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits
As a long-time customer, I continue to be impressed by Ovaga's attention to detail and exceptional customer service.