ST STM32F101T8U6
ARM Microcontrollers - MCU 32BIT Cortex M3 FL ACCESS LINE ADV
Marques: STMicroelectronics, Inc
Pièce Fabricant #: STM32F101T8U6
Fiche de données: STM32F101T8U6 Datasheet (PDF)
Colis/Caisse: VFQFPN36
type de produit: Processeurs et contrôleurs intégrés
Statut RoHS:
État des stocks: 2302 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureSTM32F101T8U6 Description générale
The STM32F101xB and STM32F101x8 medium-density access line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 36 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 16 Kbytes), and an extensive range of enhanced peripherals and I/Os connected to two APB buses. All devices offer standard communication interfaces (two I2Cs, two SPIs, and up to three USARTs), one 12-bit ADC and three general-purpose 16-bit timers.The STM32F101xx medium-density access line family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F101xx medium-density access line family includes devices in four different packages ranging from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.These features make the STM32F101xx medium-density access line microcontroller family suitable for a wide range of applications such as application control and user interface, medical and handheld equipment, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, Video intercoms, and HVACs.
Caractéristiques
- Core: ARM®32-bit Cortex®-M3 CPU
- 36 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
- Single-cycle multiplication and hardware division
- Memories
- 64 to 128 Kbytes of Flash memory
- 10 to 16 Kbytes of SRAM
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC
- PLL for CPU clock
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- Debug mode
- Serial wire debug (SWD) and JTAG interfaces
- DMA
- 7-channel DMA controller
- Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
- 1 × 12-bit, 1 μs A/D converter (up to 16 channels)
- Conversion range: 0 to 3.6 V
- Temperature sensor
- Up to 80 fast I/O ports
- 26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Six timers
- Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter
- 2 watchdog timers (Independent and Window)
- SysTick timer: 24-bit downcounter
- Up to 7 communication interfaces
- Up to 2 x I2C interfaces (SMBus/PMBus)
- Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
- Up to 2 SPIs (18 Mbit/s)
- CRC calculation unit, 96-bit unique ID
- ECOPACK®packages
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Manufacturer: | STMicroelectronics | Product Category: | ARM Microcontrollers - MCU |
RoHS: | Details | Series: | STM32F101T8 |
Mounting Style: | SMD/SMT | Package / Case: | UFQFPN-36 |
Core: | ARM Cortex M3 | Program Memory Size: | 64 kB |
Data Bus Width: | 32 bit | ADC Resolution: | 12 bit |
Maximum Clock Frequency: | 36 MHz | Number of I/Os: | 26 I/O |
Data RAM Size: | 10 kB | Supply Voltage - Min: | 2 V |
Supply Voltage - Max: | 3.6 V | Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 85 C | Packaging: | Tray |
Brand: | STMicroelectronics | Data RAM Type: | SRAM |
Height: | 0.88 mm | Interface Type: | I2C, SPI, USART |
Length: | 6 mm | Moisture Sensitive: | Yes |
Number of ADC Channels: | 10 Channel | Number of Timers/Counters: | 3 Timer |
Processor Series: | ARM Cortex M | Product: | MCUs |
Product Type: | ARM Microcontrollers - MCU | Program Memory Type: | Flash |
Factory Pack Quantity: | 2940 | Subcategory: | Microcontrollers - MCU |
Tradename: | STM32 | Width: | 6 mm |
Unit Weight: | 0.028219 oz |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The STM32F101T8U6 is a microcontroller chip developed by STMicroelectronics. It belongs to the STM32F1 series and has 64KB flash memory, 8KB RAM, and operates at a speed of up to 72 MHz. It offers various advanced features like GPIO, UART, SPI, I2C, and ADC interfaces, making it suitable for a wide range of applications in industries such as consumer electronics, industrial automation, and medical devices.
-
Equivalent
Some equivalent products of the STM32F101T8U6 chip include STM32F101T8U7, STM32F101T8U8, and STM32F101T8UZ chips. -
Features
The STM32F101T8U6 is a microcontroller with the following features: 32-bit ARM Cortex-M3 core, 8KB flash memory, 10KB RAM, 37 GPIO pins, 7 timers, 2 SPI, 2 I2C, 3 USART, 12-bit ADC, 12-bit DAC, and a USB 2.0 full-speed interface. -
Pinout
The STM32F101T8U6 is a microcontroller with 48 pins. It is part of the STM32F1 series and is based on the ARM Cortex-M3 core. The pin count refers to the number of physical pins on the package of the microcontroller, and their specific functions can vary depending on how they are configured in the application. -
Manufacturer
The manufacturer of the STM32F101T8U6 is STMicroelectronics. It is a multinational semiconductor and electronics company. -
Application Field
The STM32F101T8U6 is a microcontroller that can be used in a variety of applications. Some potential areas of application include industrial automation, consumer electronics, power management, and telecommunications. It is a versatile microcontroller that provides fast and efficient processing for these and other applications. -
Package
The STM32F101T8U6 chip comes in a LQFP package type with a 100 pins form. The size of the package is 14x14 mm.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits
I was pleasantly surprised by how quickly our order was processed and shipped.