Les images sont à titre de référence uniquement. Voir les spécifications du produit
ST STM32F101VDT6
ARM Microcontrollers - MCU 32BIT Cortex M3 H/D ACCESS USB MCU
Marques: STMicroelectronics, Inc
Pièce Fabricant #: STM32F101VDT6
Fiche de données: STM32F101VDT6 Datasheet (PDF)
Colis/Caisse: LQFP-100
type de produit: Processeurs et contrôleurs intégrés
Statut RoHS:
État des stocks: 2236 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureSTM32F101VDT6 Description générale
The STM32F101xC, STM32F101xD and STM32F101xE access line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 36 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 48 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer one 12-bit ADC, four general-purpose 16-bit timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs and five USARTs.The STM32F101xx high-density access line family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.These features make the STM32F101xx high-density access line microcontroller family suitable for a wide range of applications such as medical and handheld equipment, PC peripherals and gaming, GPS platforms, industrial applications, PLC, printers, scanners alarm systems and video intercom.
Caractéristiques
- Core: ARM®32-bit Cortex®-M3 CPU
- 36 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance
- Single-cycle multiplication and hardware division
- Memories
- 256 to 512 Kbytes of Flash memory
- up to 48 Kbytes of SRAM
- Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
- LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR, and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC with calibration capability
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBATsupply for RTC and backup registers
- 1 x 12-bit, 1 μs A/D converters (up to 16 channels)
- Conversion range: 0 to 3.6 V
- Temperature sensor
- 2 × 12-bit D/A converters
- DMA
- 12-channel DMA controller
- Peripherals supported: timers, ADC, DAC, SPIs, I2Cs and USARTs
- Up to 112 fast I/O ports
- 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- Cortex-M3 Embedded Trace Macrocell™
- Up to 9 timers
- Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counters
- 2 × watchdog timers (Independent and Window)
- SysTick timer: a 24-bit downcounter
- 2 × 16-bit basic timers to drive the DAC
- Up to 10 communication interfaces
- Up to 2 x I2C interfaces (SMSTM32F101xC, STM32F101xD, STM32F101xE7816 interface, LIN, IrDA capability, modem control)
- Up to 3 SPIs (18 Mbit/s)
Caractéristiques
| Paramètre | Valeur | Paramètre | Valeur |
|---|---|---|---|
| Manufacturer: | STMicroelectronics | Product Category: | ARM Microcontrollers - MCU |
| RoHS: | Details | Series: | STM32F101VD |
| Mounting Style: | SMD/SMT | Package / Case: | LQFP-100 |
| Core: | ARM Cortex M3 | Program Memory Size: | 384 kB |
| Data Bus Width: | 32 bit | ADC Resolution: | 12 bit |
| Maximum Clock Frequency: | 36 MHz | Number of I/Os: | 80 I/O |
| Data RAM Size: | 48 kB | Supply Voltage - Min: | 2 V |
| Supply Voltage - Max: | 3.6 V | Minimum Operating Temperature: | - 40 C |
| Maximum Operating Temperature: | + 85 C | Packaging: | Tray |
| Brand: | STMicroelectronics | Data RAM Type: | SRAM |
| Height: | 1.4 mm | Interface Type: | I2C, SPI, USART |
| Length: | 14 mm | Moisture Sensitive: | Yes |
| Number of ADC Channels: | 16 Channel | Number of Timers/Counters: | 6 Timer |
| Processor Series: | ARM Cortex M | Product Type: | ARM Microcontrollers - MCU |
| Program Memory Type: | Flash | Factory Pack Quantity: | 540 |
| Subcategory: | Microcontrollers - MCU | Tradename: | STM32 |
| Width: | 14 mm |
Expédition
| Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
| Modalités de paiement | Frais de main | |
|---|---|---|
 |
Virement bancaire | facturer des frais bancaires de 30,00 $ US. |
 |
Pay Pal | facturer des frais de service de 4,0 %. |
 |
Carte de crédit | facturez des frais de service de 3,5%. |
 |
Western union | charge US.00 banking fee. |
 |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
![Produit]( "Produit")
Étape1 :Produit
-
![Emballage sous vide]( "Emballage sous vide")
Étape2 :Emballage sous vide
-
![Sac antistatique]( "Sac antistatique")
Étape3 :Sac antistatique
-
![Emballage individuel]( "Emballage individuel")
Étape4 :Emballage individuel
-
![Boîtes d'emballage]( "Boîtes d'emballage")
Étape5 :Boîtes d'emballage
-
![étiquette d'expédition à code-barres]( "étiquette d'expédition à code-barres")
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The STM32F101VDT6 is a microcontroller chip in the STM32F1 series by STMicroelectronics. It is based on the ARM Cortex-M3 core and offers a range of features for application development. The chip includes 256KB of Flash memory, 64KB of RAM, and various peripherals such as timers, ADCs, UARTs, and GPIOs. It is commonly used in embedded systems, IoT devices, and other applications requiring moderate processing power and low power consumption.
-
Equivalent
Some equivalent products to the STM32F101VDT6 chip include the STM32F101VCT6, STM32F101RCT6, STM32F101C6T6, STM32F101CBT6, and STM32F101RBT6. These chips are part of the STM32F101 series and offer similar features and functionality. -
Features
The STM32F101VDT6 is a microcontroller with the following features: 32-bit ARM Cortex-M3 core, 256KB flash memory, 64KB SRAM, 5 UARTs, 3 I2C interfaces, 2 SPI interfaces, 37 GPIO pins, 12-channel ADC, 12-bit DAC, multiple timers, and a wide range of communication and peripheral options. -
Pinout
The STM32F101VDT6 is a microcontroller with a 100-pin package count. It is part of the STM32F1 series from STMicroelectronics. The specific pin functions are detailed in the datasheet provided by the manufacturer. -
Manufacturer
The STM32F101VDT6 is manufactured by STMicroelectronics. It is a multinational semiconductor manufacturer that designs and produces a wide range of integrated circuits and solutions for various industries including automotive, consumer electronics, and industrial applications. -
Application Field
The STM32F101VDT6 is a microcontroller with a 32-bit ARM Cortex-M3 core. It is commonly used in various applications such as industrial control systems, motor control, consumer electronics, and communication devices. It provides features like high performance, low power consumption, and a wide range of peripherals, making it suitable for a diverse range of applications. -
Package
The STM32F101VDT6 is a microcontroller chip that comes in a LQFP (Low-Profile Quad Flat Package) package type. It has a 100-pin form with a size of 14mm x 14mm.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
![Produit]( "Produit")
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
![quantity]( "quantity")
La quantité minimum de commande commence à partir de 1 pièce.
-
![shipping]( "shipping")
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
![garantie]( "garantie")
Garantie de qualité de 365 jours pour tous les produits
The components were of average quality, but the delivery arrived sooner than expected.