Les images sont à titre de référence uniquement. Voir les spécifications du produit
ST STM32F103V8T6
ARM Microcontrollers - MCU 32BIT Cortex M3 64KB 20KB RAM 2X12 ADC
Marques: STMicroelectronics, Inc
Pièce Fabricant #: STM32F103V8T6
Fiche de données: STM32F103V8T6 Datasheet (PDF)
Colis/Caisse: LQFP-100
type de produit: Processeurs et contrôleurs intégrés
Statut RoHS:
État des stocks: 2478 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureSTM32F103V8T6 Description générale
The STM32F103xx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F103xx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.These features make the STM32F103xx medium-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.Evaluation board with STM32F103Zx MCU.ST-LINK/V2 in-circuit debugger/programmer for ST.STM32 Nucleo-64 development board with STM32F103.
Caractéristiques
- ARM®32-bit Cortex®-M3 CPU Core
- 72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
- Single-cycle multiplication and hardware division
- Memories
- 64 or 128 Kbytes of Flash memory
- 20 Kbytes of SRAM
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR, and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC
- PLL for CPU clock
- 32 kHz oscillator for RTC with calibration
- Low-power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- 2 x 12-bit, 1 μs A/D converters (up to 16 channels)
- Conversion range: 0 to 3.6 V
- Dual-sample and hold capability
- Temperature sensor
- DMA
- 7-channel DMA controller
- Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
- Up to 80 fast I/O ports
- 26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- 7 timers
- Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- 16-bit, motor control PWM timer with dead-time generation and emergency stop
- 2 watchdog timers (Independent and Window)
- SysTick timer 24-bit downcounter
- Up to 9 communication interfaces
- Up to 2 x I2C interfaces (SMBus/PMBus)
- Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
- Up to 2 SPIs (18 Mbit/s)
- CAN interface (2.0B Active)
- USB 2.0 full-speed interface
- CRC calculation unit, 96-bit unique ID
- Packages are ECOPA
Application
- Industrial control systems
- Home automation
- Internet of Things (IoT) devices
- Motor control
- Sensor data acquisition and processing
- Embedded systems
Caractéristiques
| Paramètre | Valeur | Paramètre | Valeur |
|---|---|---|---|
| Product Name | STM32F103V8T6 | Product Type | Microcontroller |
| Manufacturer | STMicroelectronics | Series | STM32F1 Series |
| Core Processor | ARM Cortex-M3 | Core Size | 32-Bit |
| Speed | 72MHz | Connectivity | CAN, I²C, SPI, USART, USB |
| Peripherals | ADC, DAC, DMA, RTC, TIM, PWM | Number of I/Os | 33 |
| Program Memory Size | 64KB (64K x 8) | Data RAM Size | 20KB |
| Voltage - Supply | 2.0 V ~ 3.6 V | Operating Temperature | -40°C ~ 85°C |
| Mounting Type | Surface Mount |
Expédition
| Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
| Modalités de paiement | Frais de main | |
|---|---|---|
 |
Virement bancaire | facturer des frais bancaires de 30,00 $ US. |
 |
Pay Pal | facturer des frais de service de 4,0 %. |
 |
Carte de crédit | facturez des frais de service de 3,5%. |
 |
Western union | charge US.00 banking fee. |
 |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
![Produit]( "Produit")
Étape1 :Produit
-
![Emballage sous vide]( "Emballage sous vide")
Étape2 :Emballage sous vide
-
![Sac antistatique]( "Sac antistatique")
Étape3 :Sac antistatique
-
![Emballage individuel]( "Emballage individuel")
Étape4 :Emballage individuel
-
![Boîtes d'emballage]( "Boîtes d'emballage")
Étape5 :Boîtes d'emballage
-
![étiquette d'expédition à code-barres]( "étiquette d'expédition à code-barres")
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Pièces équivalentes
Pour le STM32F103V8T6 composant, vous pouvez envisager ces pièces de rechange et alternatives:
Numéro d'article
Marques
Emballer
Description
Numéro d'article : STM32F103C8T6
Marques :
Emballer :
Description : STM32F103C8T6: Another variant of the STM32F1 series with similar specifications.
Numéro d'article : STM32F103VET6
Marques :
Emballer :
Description : STM32F103VET6: A higher-end variant with more flash memory and RAM.
Points de pièce
-
The STM32F103V8T6 chip is a microcontroller based on the arm cortex-m3 architecture. it features a high-performance 32-bit core running at up to 72mhz, with various integrated peripherals such as gpio, timers, uart, spi, i2c, and adc. it also has a generous amount of flash memory (up to 128kb) and ram (up to 20kb), making it suitable for a wide range of embedded applications.
-
Equivalent
Some equivalent products of the STM32F103V8T6 chip include the stm32f103c8t6, stm32f103vct6, and stm32f103rbt6. they are part of the same stm32f103 series and have similar features and specifications. -
Features
The STM32F103V8T6 microcontroller features arm cortex-m3 core, a clock speed of up to 72 mhz, 64 kb of flash memory, 20 kb of sram, 37 general-purpose i/o pins, and a wide range of peripherals including timers, uart, spi, i2c interfaces, and adc. -
Pinout
The STM32F103V8T6 microcontroller has 64 pins. the pins serve various functions including gpio (general purpose input output), timers, uart (universal asynchronous receiver transmitter), spi (serial peripheral interface), i2c (inter-integrated circuit) communication, adc (analog to digital converter), and more. -
Manufacturer
Stmicroelectronics is the manufacturer of the STM32F103V8T6. it is a global semiconductor company, specializing in developing and manufacturing a wide range of integrated circuit products for a variety of applications. -
Application Field
The STM32F103V8T6 is a microcontroller commonly used in applications such as industrial automation, consumer electronics, and home appliances. it is ideal for projects requiring process control, sensor interfacing, data logging, and communication protocols. its advanced features and compatibility with various software development tools make it a popular choice for embedded system design. -
Package
The STM32F103V8T6 chip comes in a lqfp (low-profile quad flat package) package type. it has 48 pins and a size of 7mm x 7mm.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
![Produit]( "Produit")
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
![quantity]( "quantity")
La quantité minimum de commande commence à partir de 1 pièce.
-
![shipping]( "shipping")
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
![garantie]( "garantie")
Garantie de qualité de 365 jours pour tous les produits
The product arrived promptly and was exactly as described.