ST STM32F103ZFT6
ARM Microcontrollers - MCU XL-Density Access Line 32-Bit 768 Kb
Marques: STMicroelectronics, Inc
Pièce Fabricant #: STM32F103ZFT6
Fiche de données: STM32F103ZFT6 Datasheet (PDF)
Colis/Caisse: LQFP-144
type de produit: Processeurs et contrôleurs intégrés
Statut RoHS:
État des stocks: 2226 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureSTM32F103ZFT6 Description générale
The STM32F103xF and STM32F103xG performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 1 Mbyte and SRAM up to 96 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, ten general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.The STM32F103xF/G XL-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.These features make the STM32F103xF/G high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems and video intercom.
Caractéristiques
- Core: ARM® 32-bit Cortex®-M3 CPU with MPU
- 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
- Single-cycle multiplication and hardware division
- Memories
- 768 Kbytes to 1 Mbyte of Flash memory
- 96 Kbytes of SRAM
- Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
- LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR, and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC with calibration
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBATsupply for RTC and backup registers
- 3 × 12-bit, 1 μs A/D converters (up to 21 channels)
- Conversion range: 0 to 3.6 V
- Triple-sample and hold capability
- Temperature sensor
- 2 × 12-bit D/A converters
- DMA: 12-channel DMA controller
- Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- Cortex®-M3 Embedded Trace Macrocell™
- Up to 112 fast I/O ports
- 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Up to 17 timers
- Up to ten 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- 2 × 16-bit motor control PWM timers with dead-time generation and emergency stop
- 2 × watchdog timers (Independent and Window)
- SysTick timer: a 24-bit downcounter
- 2 × 16-bit basic timers to drive the DAC
- U
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Pin Count | 144 | Package Category | Quad Flat Packages |
Released Date | Jul 22, 2015 |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The STM32F103ZFT6 chip is a 32-bit microcontroller based on the ARM Cortex-M3 architecture. It offers a wide range of features and peripherals, making it suitable for various applications. With its high computing power, low power consumption, and extensive connectivity options, the STM32F103ZFT6 is widely used in industrial control systems, consumer electronics, and other embedded applications.
-
Equivalent
Some equivalent products of the STM32F103ZFT6 chip include STM32F103ZET6, STM32F103ZEY6, and STM32F103VET6. These chips belong to the same STM32F1 series and have similar features and specifications. -
Features
The STM32F103ZFT6 is a microcontroller with the ARM Cortex-M3 core, operating at a frequency of up to 72 MHz. It has a 512 KB Flash memory, 64 KB SRAM, and various digital and analog peripherals. It supports multiple communication interfaces like UART, SPI, and I2C, and has a 12-bit ADC for analog data conversion. -
Pinout
The STM32F103ZFT6 microcontroller has 144 pins. It is part of the STM32F1 series and is based on the ARM Cortex-M3 core. It features various peripherals such as GPIO, SPI, I2C, UART, and more. It is commonly used in applications that require high performance and connectivity. -
Manufacturer
STMicroelectronics is the manufacturer of the STM32F103ZFT6 microcontroller. It is a leading multinational semiconductor company that designs, develops, and manufactures a wide range of electronic components and systems. STMicroelectronics specializes in providing solutions for various industries including automotive, industrial, personal electronics, and telecommunications, among others. -
Application Field
The STM32F103ZFT6 microcontroller has a wide range of applications, including industrial automation, consumer electronics, medical devices, and automotive systems. It provides a powerful ARM Cortex-M3 processor, ample memory, and various peripherals, making it suitable for diverse and demanding embedded system designs. -
Package
The STM32F103ZFT6 chip is available in a LQFP (Low-profile Quad Flat Package) package type. Its form is QFP (Quad Flat Package), and it has a size of 10mm x 10mm.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits
Ovaga's customer service is top-notch. They were able to answer all of my questions with ease.