Les images sont à titre de référence uniquement. Voir les spécifications du produit
ST STM32F205RBT7
ARM Microcontrollers - MCU 32-Bit ARM Cortex 128kb Connectivity
Marques: ST
Pièce Fabricant #: STM32F205RBT7
Fiche de données: STM32F205RBT7 Datasheet (PDF)
Colis/Caisse: LQFP-64
type de produit: Processeurs et contrôleurs intégrés
Statut RoHS:
État des stocks: 3780 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureSTM32F205RBT7 Description générale
The STM32F20x family is based on the high-performance Arm®Cortex®-M3 32-bit RISC core operating at a frequency of up to 120 MHz. The family incorporates high-speed embedded memories (Flash memory up to 1 Mbyte, up to 128 Kbytes of system SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.The devices also feature an adaptive real-time memory accelerator (ART Accelerator™) that allows to achieve a performance equivalent to 0 wait state program execution from Flash memory at a CPU frequency up to 120 MHz. This performance has been validated using the CoreMark®benchmark.All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers. a true number random generator (RNG). They also feature standard and advanced communication interfaces. New advanced peripherals include an SDIO, an enhanced flexible static memory control (FSMC) interface (for devices offered in packages of 100 pins and more), and a camera interface for CMOS sensors. The devices also feature standard peripherals.ST-LINK/V2 in-circuit debugger/programmer for ST.
Caractéristiques
- Core: Arm® 32-bit Cortex®-M3 CPU (120 MHz max) with Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution performance from Flash memory, MPU, 150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)
- Memories
- Up to 1 Mbyte of Flash memory
- 512 bytes of OTP memory
- Up to 128 + 4 Kbytes of SRAM
- Flexible static memory controller that supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
- LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management
- From 1.8 to 3.6 V application supply + I/Os
- POR, PDR, PVD and BOR
- 4 to 26 MHz crystal oscillator
- Internal 16 MHz factory-trimmed RC
- 32 kHz oscillator for RTC with calibration
- Internal 32 kHz RC with calibration
- Low-power modes
- Sleep, Stop and Standby modes
- VBAT supply for RTC, 20 × 32 bit backup registers, and optional 4 Kbytes backup SRAM
- 3 × 12-bit, 0.5 µs ADCs with up to 24 channels and up to 6 MSPS in triple interleaved mode
- 2 × 12-bit D/A converters
- General-purpose DMA: 16-stream controller with centralized FIFOs and burst support
- Up to 17 timers
- Up to twelve 16-bit and two 32-bit timers, up to 120 MHz, each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- Debug mode: Serial wire debug (SWD), JTAG, and Cortex®-M3 Embedded Trace Macrocell™
- Up to 140 I/O ports with interrupt capability:
- Up to 136 fast I/Os up to 60 MHz
- Up to 138 5 V-tolerant I/Os
- Up to 15 communication interfaces
- Up to three I2C interfaces (SMBus/PMBus)
- Up to four USARTs and two UARTs (7.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control)
- Up to three SPIs (30 Mbit/s), two with muxed I2S to achieve audio class accuracy v
Caractéristiques
| Paramètre | Valeur | Paramètre | Valeur |
|---|---|---|---|
| Supply Voltage Min Volt | 1.8 | Supply Voltage Max Volt | 3.6 |
| Operating Temp Min Celsius | -40.0 | Operating Temp Max Celsius | 105.0 |
| Core | Arm Cortex-M3 | ECCN US | 3A991.a.2 |
| ECCN EU | NEC | Packing Type | Tray |
| RoHs compliant | Ecopack2 | Grade | Industrial |
| Package Name | LQFP 64 10x10x1.4 mm |
Expédition
| Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours |
 |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
| Modalités de paiement | Frais de main | |
|---|---|---|
 |
Virement bancaire | facturer des frais bancaires de 30,00 $ US. |
 |
Pay Pal | facturer des frais de service de 4,0 %. |
 |
Carte de crédit | facturez des frais de service de 3,5%. |
 |
Western union | charge US.00 banking fee. |
 |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
![Produit]( "Produit")
Étape1 :Produit
-
![Emballage sous vide]( "Emballage sous vide")
Étape2 :Emballage sous vide
-
![Sac antistatique]( "Sac antistatique")
Étape3 :Sac antistatique
-
![Emballage individuel]( "Emballage individuel")
Étape4 :Emballage individuel
-
![Boîtes d'emballage]( "Boîtes d'emballage")
Étape5 :Boîtes d'emballage
-
![étiquette d'expédition à code-barres]( "étiquette d'expédition à code-barres")
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The STM32F205RBT7 chip is part of the STM32 microcontroller family by STMicroelectronics. It is based on the ARM Cortex-M3 core and offers a range of hardware and software features suitable for various embedded applications. This chip provides faster processing speed, low power consumption, extensive connectivity options, and a large memory capacity, making it suitable for a wide range of applications in industries such as industrial automation, consumer electronics, and healthcare.
-
Equivalent
Some equivalent products to the STM32F205RBT7 chip include STM32F215RBT6, STM32F207RBT6, and STM32F207VGT6. These chips are part of STMicroelectronics' STM32F2 series and feature similar specifications and capabilities. -
Features
The STM32F205RBT7 is a microcontroller from the STM32F2 series, featuring a 120 MHz ARM Cortex-M3 core, 256 KB of flash memory, 128 KB of RAM, and a range of peripherals including USB, UART, SPI, I2C, and GPIO. It offers advanced control and connectivity capabilities for various embedded applications. -
Pinout
The STM32F205RBT7 is a microcontroller with 64 pins. Its main functions include controlling and processing data, running embedded applications, and communicating with external devices through various interfaces such as UART, SPI, I2C, and USB. -
Manufacturer
The STM32F205RBT7 is manufactured by STMicroelectronics. It is a multinational semiconductor and electronics company headquartered in Switzerland. STMicroelectronics is involved in the design, development, and manufacturing of a wide range of semiconductor solutions for various industries including automotive, industrial, consumer electronics, and communications. -
Application Field
The STM32F205RBT7 microcontroller is commonly used in various application areas such as industrial control systems, automation, motor control, consumer electronics, medical devices, and communication devices. It is suitable for applications that require high processing power, connectivity options, and rich peripheral features. -
Package
The STM32F205RBT7 chip has a 64-pin LQFP (Low-Profile Quad Flat Package) package type. The form factor is rectangular with a lead pitch of 0.5mm. The size of the chip is approximately 10mm x 10mm x 1.4mm.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
![Produit]( "Produit")
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
![quantity]( "quantity")
La quantité minimum de commande commence à partir de 1 pièce.
-
![shipping]( "shipping")
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
![garantie]( "garantie")
Garantie de qualité de 365 jours pour tous les produits
Ovaga's online store is easy to navigate, making my search for the right component a breeze!