ST STM32L010K8T6
ARM Microcontrollers - MCU Ultra-low-power value line Arm Cortex-M0+ MCU 64-Kbytes of Flash , 32 MHz CPU
Marques: ST
Pièce Fabricant #: STM32L010K8T6
Fiche de données: STM32L010K8T6 Datasheet (PDF)
Colis/Caisse: LQFP32
type de produit: Processeurs et contrôleurs intégrés
Statut RoHS:
État des stocks: 3967 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureSTM32L010K8T6 Description générale
The ultra-low-power STM32L010K8/R8 microcontrollers incorporate the high-performance Arm®Cortex®-M0+ 32-bit RISC core operating at 32 MHz, high-speed embedded memories (64 Kbytes of Flash program memory, 256 bytes of data EEPROM and 8 Kbytes of RAM) plus an extensive range of enhanced I/Os and peripherals.ST-LINK/V2 in-circuit debugger/programmer for ST.Evaluation board with STM32L073VZ MCU.STM32 Nucleo-64 development board with STM32L010.Discovery kit with STM32L053C8 MCU.
Caractéristiques
- Ultra-low-power platform
- 1.8 V to 3.6 V power supply
- –40 to 85 °C temperature range
- 0.27 µA Standby mode (2 wakeup pins)
- 0.4 µA Stop mode (16 wakeup lines)
- 0.8 µA Stop mode + RTC + 8-Kbyte RAM retention
- Down to 88 µA/MHz in Run mode
- 5 µs wakeup time (from Flash memory)
- 41 µA 12-bit ADC conversion at 10 ksps
- Core: Arm® 32-bit Cortex®-M0+
- From 32 kHz to 32 MHz
- 0.95 DMIPS/MHz
- Reset and supply management
- Ultra-low-power BOR (brownout reset) with 5 selectable thresholds
- Ultra-low-power POR/PDR
- Clock sources
- 0 to 32 MHz external clock
- 32 kHz oscillator for RTC with calibration
- High-speed internal 16 MHz factory-trimmed RC (±1%)
- Internal low-power 37 kHz RC
- Internal multispeed low-power 65 kHz to 4.2 MHz RC
- PLL for CPU clock
- Pre-programmed bootloader
- USART, SPI supported
- Development support
- Serial wire debug supported
- Up to 51 fast I/Os (45 I/Os 5-Volt tolerant)
- Memories
- 64-Kbyte Flash memory
- 8-Kbyte RAM
- 256 bytes of data EEPROM
- 20-byte backup register
- Sector protection against R/W operation
- Analog peripherals
- 12-bit ADC 1.14 Msps up to 16 channels (down to 1.8 V)
- 7-channel DMA controller, supporting ADC, SPI, I2C, USART and timers
- 4x peripherals communication interface
- 1x USART (ISO7816), 1x LPUART (low power)
- 1x SPI 16 Mbit/s
- 1x I2C (SMBus/PMBus)
- 7x timers: 1x 16-bit with up to 4 channels, 1x 16-bit with up to 2 channels, 1x 16-bit ultra-low-power timer, 1x SysTick, 1x RTC and 2x watchdogs (independent/window)
- CRC calculation unit, 96-bit unique ID
- All packages are ECOPACK2 compliant.
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Supply Voltage Min Volt | 1.8 | Supply Voltage Max Volt | 3.6 |
Operating Temp Min Celsius | -40.0 | Operating Temp Max Celsius | 85.0 |
Core | Arm Cortex-M0+ | ECCN US | 3A991.a.2 |
ECCN EU | NEC | Packing Type | Tray |
RoHs compliant | Ecopack2 | Grade | Industrial |
Package Name | LQFP 32 7x7x1.4 mm |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The STM32L010K8T6 chip is a low-power microcontroller unit (MCU) from STMicroelectronics. It is based on the ARM Cortex-M0+ core and is specifically designed for energy-efficient applications. With its low power consumption and a wide range of features, such as digital peripherals, multiple communication interfaces, and integrated flash memory, the STM32L010K8T6 chip is suitable for various battery-powered devices and Internet of Things (IoT) applications.
-
Equivalent
Some equivalent products of the STM32L010K8T6 chip include the STM32L072KZT6, STM32L051K8T6, and STM32L011K4T6. These chips offer similar features and capabilities to the STM32L010K8T6 while potentially having minor differences in specifications or performance. -
Features
The STM32L010K8T6 is a microcontroller with the following features: 8KB of Flash memory, 2KB of RAM, 16MHz operating frequency, low power consumption, multiple communication interfaces (SPI, I2C, USART), 6-channel 12-bit ADC, 2-channel DAC, up to 16 GPIO pins, and various timers and PWM outputs. -
Pinout
The STM32L010K8T6 is a microcontroller with 32 pins. It is part of the STM32L0 series and features a Cortex-M0+ core. It provides various functions such as digital I/O, timers, SPI, I2C, UART, ADC, and more. -
Manufacturer
The manufacturer of the STM32L010K8T6 is STMicroelectronics. It is a multinational semiconductor company involved in designing, manufacturing, and marketing a broad range of products, including microcontrollers, sensors, power management circuits, and more. STMicroelectronics is a prominent player in the electronics industry and serves various sectors such as automotive, industrial, healthcare, and consumer electronics. -
Application Field
The STM32L010K8T6 microcontroller is suitable for low-power applications and is widely used in various industries including consumer electronics, wearable devices, home automation, and industrial control systems. It can also be used in battery-powered devices, IoT applications, and sensor nodes where energy efficiency is critical. -
Package
The STM32L010K8T6 chip is available in a LQFP package type (low-profile quad flat package). It is a 32-bit microcontroller and has a small form factor, measuring 7 mm x 7 mm.
Fiche de données PDF
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits
We’ve seen significant improvements in our system after using Ovaga’s components.