TI TL061IP
J-FET Amplifier 1 Circuit 8-PDIP
Marques: TI
Pièce Fabricant #: TL061IP
Fiche de données: TL061IP Fiche de données (PDF)
Colis/Caisse: DIP8
type de produit: Operational Amplifiers
Statut RoHS:
État des stocks: 189 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureTL061IP Description générale
The TL06x (TL061, TL062, and TL064) family of industry-standard operational amplifiers (op amps) mirror the TL07x and TL08x family of op amps with lower power consumption. These devices provide outstanding value for cost-sensitive applications, featuring high input impedance, wide bandwidth, high slew rate, and low input offset and input bias currents. High ESD (1.5 kV, HBM), integrated EMI and RF filters, and wide temperature operation enable the TL06x devices to be used in rugged and environmentally-demanding applications.
Caractéristiques
- Very low power consumption
- Typical supply current: 200 µA (per amplifier)
- Wide common-mode and differential voltage ranges
- Low input bias and offset currents
- Common-mode input voltage range includes V CC+
- Output short-circuit protection
- High input impedance: JFET-input stage
- Internal frequency compensation
- Latch-up-free operation
- High slew rate: 3.5 V/µs typical
- On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Number of channels | 1 | Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) | 30 |
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) | 7 | Rail-to-rail | In to V+ |
GBW (typ) (MHz) | 1 | Slew rate (typ) (V/µs) | 3.5 |
Vos (offset voltage at 25°C) (max) (mV) | 6 | Iq per channel (typ) (mA) | 0.2 |
Vn at 1 kHz (typ) (nV√Hz) | 42 | Rating | Catalog |
Operating temperature range (°C) | -40 to 85, 0 to 70 | Offset drift (typ) (µV/°C) | 10 |
Features | Standard Amps | Input bias current (max) (pA) | 200 |
CMRR (typ) (dB) | 86 | Iout (typ) (A) | 0.01 |
Architecture | FET | Input common mode headroom (to negative supply) (typ) (V) | 3 |
Input common mode headroom (to positive supply) (typ) (V) | 0 | Output swing headroom (to negative supply) (typ) (V) | 1.5 |
Output swing headroom (to positive supply) (typ) (V) | -1.5 |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The TL061IP is a low-power JFET-input operational amplifier chip with high input impedance and low input bias current. It is commonly used in audio applications, voltage follower circuits, and instrumentation amplifiers. The TL061IP operates on a single power supply voltage and is available in an 8-pin DIP package.
-
Equivalent
The equivalent products of TL061IP chip are TL061CP, TL061CD, and TL061ID. These chips are part of the TL061 series and offer similar performance characteristics and specifications, making them suitable replacements for the TL061IP in various electronic applications. -
Features
TL061IP is a general-purpose operational amplifier designed for low voltage applications. It features low input bias current, low offset voltage, and low noise. It has a wide supply voltage range of 4V to 18V and can operate in temperatures ranging from -55°C to 125°C. -
Pinout
The TL061IP is a single operational amplifier with an 8-pin DIP (Dual In-line Package) configuration. The pin functions are: 1. Offset null 2. Inverting input 3. Non-inverting input 4. V- (Negative voltage supply) 5. Offset null 6. Output 7. V+ (Positive voltage supply) 8. Not connected. -
Manufacturer
Texas Instruments is the manufacturer of the TL061IP. Texas Instruments is an American technology company that designs and manufactures semiconductors, which are essential components in a wide range of electronic devices. The company is known for developing integrated circuits and embedded processors for industries such as automotive, communications, and consumer electronics. -
Application Field
The TL061IP is commonly used in audio preamplifiers, active filters, and low-power amplifiers. It can also be found in instrumentation and control systems, as well as in test and measurement equipment. Its low noise and low offset voltage make it suitable for applications requiring high precision and accuracy. -
Package
The TL061IP chip is available in a PDIP-8 package, which is a plastic dual in-line package with 8 pins. The chip has a form factor of 0.3 inches in width and 0.4 inches in length. It is a standard size integrated circuit chip commonly used in electronic devices.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits