Commandes de plus de
$5000TI TL082ACP
J-FET Amplifier 2 Circuit 8-PDIP
Marques: ti
Pièce Fabricant #: TL082ACP
Fiche de données: TL082ACP Fiche de données (PDF)
Colis/Caisse: PDIP (P)-8
type de produit: Instrumentation, OP Amps, Buffer Amps
Statut RoHS:
État des stocks: 8 724 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
TL082ACP Description générale
From audio enthusiasts to electronics professionals, the TL082ACP has earned a reputation as the go-to choice for amplification and filtering needs. Its exceptional input characteristics and wide bandwidth make it a versatile solution for a range of applications, from basic amplification tasks to intricate signal processing designs. With precise performance, efficient design, and cost-effectiveness in mind, the TL082ACP continues to be a trusted companion for those seeking reliable and high-quality operational amplifiers
Caractéristiques
- Suitable for high-speed applications
- Low power consumption enables long battery life
- Fast response time and low latency
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Number of channels | 2 | Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) | 30 |
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) | 7 | Rail-to-rail | In to V+ |
GBW (typ) (MHz) | 3 | Slew rate (typ) (V/µs) | 13 |
Vos (offset voltage at 25°C) (max) (mV) | 6 | Iq per channel (typ) (mA) | 1.4 |
Vn at 1 kHz (typ) (nV√Hz) | 18 | Rating | Catalog |
Operating temperature range (°C) | 0 to 70 | Offset drift (typ) (µV/°C) | 18 |
Features | Standard Amps | Input bias current (max) (pA) | 200 |
CMRR (typ) (dB) | 86 | Iout (typ) (A) | 0.01 |
Architecture | FET | Input common mode headroom (to negative supply) (typ) (V) | 3 |
Input common mode headroom (to positive supply) (typ) (V) | 0 | Output swing headroom (to negative supply) (typ) (V) | 1.5 |
Output swing headroom (to positive supply) (typ) (V) | -1.5 |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The TL082ACP is a dual operational amplifier (op-amp) chip manufactured by Texas Instruments. It features high input impedance, low noise, and high slew rate, making it suitable for a wide range of audio and measurement applications. The chip comes in an 8-pin DIP package and operates on a wide single-supply voltage range.
-
Equivalent
Equivalent products of the TL082ACP chip include TL082, TL082ACN, TL082ACD, and TL082CD. These are all dual operational amplifiers with JFET inputs and low noise characteristics. -
Features
TL082ACP is a low noise JFET dual operational amplifier with high input impedance. It has low offset voltage, low input bias and offset currents, wide bandwidth, and high slew rate. It operates on a wide range of power supply voltages and is suitable for a variety of audio and precision signal processing applications. -
Pinout
The TL082ACP is an operational amplifier (op-amp) with 8 pins. Its functions include providing high input impedance, low offset voltage, and low noise for signal amplification and filtering applications. Pin 1 and 4 are the power supply pins, pin 2 is the inverting input, pin 3 is the non-inverting input, pin 5 is the offset null, and pins 6, 7, and 8 are the output, inverting input, and non-inverting input, respectively. -
Manufacturer
TL082ACP is manufactured by Texas Instruments. Texas Instruments is an American multinational semiconductor company that designs and manufactures various integrated circuits and chips for a wide range of applications including analog and digital electronics, power management, and microcontrollers. -
Application Field
Some application areas of TL082ACP include audio amplifiers, instrumentation amplifiers, active filters, voltage followers, and current-to-voltage converters. It is commonly used in audio equipment, medical devices, automotive systems, and industrial control systems due to its low noise, high input impedance, and high gain bandwidth. -
Package
The TL082ACP chip comes in a PDIP-8 package type, with a dual operational amplifier housed in an 8-pin plastic dual in-line package. It has a standard through-hole form factor and dimensions of 9.81mm x 6.35mm x 3.3mm.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits