Ce site web utilise des cookies. En utilisant ce site, vous consentez à l'utilisation de cookies. Pour plus d'informations, veuillez consulter notre politique de confidentialité.

TI UCC27211DDAR

Half-Bridge Gate Driver IC Non-Inverting 8-SO PowerPad

ISO14001 ISO9001 DUNS

Marques: TI

Pièce Fabricant #: UCC27211DDAR

Fiche de données: UCC27211DDAR Fiche de données (PDF)

Colis/Caisse: SOP-8

type de produit: Power Driver ICs

Statut RoHS:

État des stocks: 90 pièces, nouveau original

Warranty: 1 Year Ovaga Warranty - Find Out More

Ajouter à la nomenclature

Citation courte

Veuillez soumettre une demande de prix pour UCC27211DDAR ou envoyez-nous un email: E-mail: [email protected], nous vous contacterons dans les 12 heures.

UCC27211DDAR Description générale

The UCC27210 and UCC27211 drivers are based on the popular UCC27200 and UCC27201 MOSFET drivers, but offer several significant performance improvements. Peak output pull-up and pull-down current has been increased to 4-A source and 4-A sink, and pull-up and pull-down resistance have been reduced to 0.9 Ω, thereby allowing for driving large power MOSFETs with minimized switching losses during the transition through the Miller Plateau of the MOSFET. The input structure is now able to directly handle –10 VDC, which increases robustness and also allows direct interface to gate-drive transformers without using rectification diodes. The inputs are also independent of supply voltage and have a maximum rating of 20-V.

The switching node (HS pin) of the UCC2721x can handle –18 V maximum which allows the high-side channel to be protected from inherent negative voltages caused parasitic inductance and stray capacitance. The UCC27210 (Pseudo-CMOS inputs) and UCC27211 (TTL inputs) have increased hysteresis allowing for interface to analog or digital PWM controllers with enhanced noise immunity.

The low-side and high-side gate drivers are independently controlled and matched to 2 ns between the turnon and turnoff of each other.

An on-chip 120-V rated bootstrap diode eliminates the external discrete diodes. Undervoltage lockout is provided for both the high-side and the low-side drivers providing symmetric turnon and turnoff behavior and forcing the outputs low if the drive voltage is below the specified threshold.

Both devices are offered in 8-pin SOIC (D), PowerPAD SOIC-8 (DDA), 4-mm × 4-mm SON-8 (DRM) and SON-10 (DPR) packages.

UCC27211DDAR

Caractéristiques

  • Drives Two N-Channel MOSFETs in High-Side
    and Low-Side Configuration With Independent
    Inputs
  • Maximum Boot Voltage 120-V DC
  • 4-A Sink, 4-A Source Output Currents
  • 0.9-Ω Pullup and Pulldown Resistance
  • Input Pins Can Tolerate –10 V to 20 V and Are
    Independent of Supply Voltage Range
  • TTL or Pseudo-CMOS Compatible Input Versions
  • 8-V to 17-V VDD Operating Range, (20-V Absolute
    Maximum)
  • 7.2-ns Rise and 5.5-ns Fall Time With 1000-pF
    Load
  • Fast Propagation Delay Times (18 ns Typical)
  • 2-ns Delay Matching
  • Symmetrical Undervoltage Lockout for High-Side
    and Low-Side Driver
  • All Industry Standard Packages Available (SOIC-8,
    PowerPAD™ SOIC-8, 4-mm × 4-mm SON-8
    and 4-mm × 4-mm SON-10)
  • Specified from –40 to 140 °C

Caractéristiques

Paramètre Valeur Paramètre Valeur
Bus voltage (max) (V) 110 Power switch MOSFET
Input VCC (min) (V) 8 Input VCC (max) (V) 17
Peak output current (A) 4 Operating temperature range (°C) -40 to 140
Undervoltage lockout (typ) (V) 8 Rating Catalog
Propagation delay time (µs) 0.02 Rise time (ns) 8
Fall time (ns) 7 Iq (mA) 0.001
Input threshold TTL Channel input logic TTL
Negative voltage handling at HS pin (V) -12

Expédition

Type d'expédition Frais d'expédition Délai de mise en œuvre
DHL DHL $20.00-$40.00 (0.50 KG) 2-5 jours
Fedex FedEx $20.00-$40.00 (0.50 KG) 2-5 jours
UPS UPS $20.00-$40.00 (0.50 KG) 2-5 jours
TNT TNT $20.00-$40.00 (0.50 KG) 2-5 jours
EMS EMS $20.00-$40.00 (0.50 KG) 2-5 jours
LA POSTE AÉRIENNE ENREGISTRÉE LA POSTE AÉRIENNE ENREGISTRÉE $20.00-$40.00 (0.50 KG) 2-5 jours

Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.

Paiement

Modalités de paiement Frais de main
Virement bancaire Virement bancaire facturer des frais bancaires de 30,00 $ US.
Pay Pal Pay Pal facturer des frais de service de 4,0 %.
Carte de crédit Carte de crédit facturez des frais de service de 3,5%.
Western union Western union charge US.00 banking fee.
Paiement de Petit Montant Paiement de Petit Montant facturer des frais bancaires de 0,00 $ US.

Garanties

1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.

2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.

Emballage

  • Produit

    Étape1 :Produit

  • Emballage sous vide

    Étape2 :Emballage sous vide

  • Sac antistatique

    Étape3 :Sac antistatique

  • Emballage individuel

    Étape4 :Emballage individuel

  • Boîtes d'emballage

    Étape5 :Boîtes d'emballage

  • étiquette d'expédition à code-barres

    Étape6 :étiquette d'expédition à code-barres

Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.

L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.

Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.

Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.

  • ESD
  • ESD

Points de pièce

  • The UCC27211DDAR chip is a dual-channel, high-speed gate driver designed for driving power MOSFETs in applications such as motor control, power supplies, and lighting. It offers robust protection features and excellent performance, making it ideal for high-power applications requiring fast switching speeds and precise control.
  • Equivalent

    The equivalent products of UCC27211DDAR chip are UCC27211, UCC27212, UCC27213, and UCC27214. These chips are part of the UCC27211 family of high-speed, gate drivers with 4 A source and 4 A sink current capability. They are designed for driving power MOSFETs and IGBTs in half-bridge and full-bridge configurations.
  • Features

    1. Dual 4-A/8-A peak source/sink output current 2. Supports up to 60-V input voltage 3. Integrated bootstrap diode 4. Programmable dead time control 5. Adaptive shoot-through protection 6. Integrated undervoltage lockout and thermal shutdown 7. 5-V regulator with 10-mA output 8. Adjustable soft-start 9. Supports up to 2.2-MHz switching frequency
  • Pinout

    The UCC27211DDAR has 8 pins and functions as a high-speed, dual MOSFET driver with 4-A peak source and sink current capabilities. It is commonly used in high-side and low-side driver applications, such as synchronous buck converters and half-bridge inverters.
  • Manufacturer

    The UCC27211DDAR is manufactured by Texas Instruments, a leading semiconductor company that produces a wide range of integrated circuits and embedded processors for various industries including automotive, industrial, and consumer electronics. Texas Instruments is known for its high-quality products and innovative solutions in the field of analog and digital technologies.
  • Application Field

    The UCC27211DDAR is commonly used in high-side or low-side gate driver applications for power MOSFETs and IGBTs. It finds applications in power supplies, motor drives, and inverter systems for industrial and automotive sectors. Its features like high output current, low propagation delay, and high common-mode rejection ratio make it suitable for fast switching and high efficiency systems.
  • Package

    The UCC27211DDAR chip comes in a standard surface mount package type known as SOIC-8. It is a dual-channel low side gate driver with a form factor of an integrated circuit (IC) and a standardized size of 8 pins.

Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente

  • Produit

    Nous avons des produits riches, pouvons répondre à vos différents besoins.

  • quantity

    La quantité minimum de commande commence à partir de 1 pièce.

  • shipping

    Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $

  • garantie

    Garantie de qualité de 365 jours pour tous les produits

Notes et avis

Notes
Veuillez évaluer le produit !
Merci de saisir un commentaire

Veuillez soumettre vos commentaires après vous être connecté à votre compte.

Soumettre

Recommander

  • TPS61201DRCR

    TPS61201DRCR

    Texas Instruments

    3A Switches for Efficient Power Conversion

  • BQ24172RGYR

    BQ24172RGYR

    Texas Instruments

    Fast charger for 1-3 cell batteries

  • LM1117MPX-ADJ/NOPB

    LM1117MPX-ADJ/NOPB

    TI

    Linear Voltage Regulator IC Positive Adjustable 1 ...

  • LM5112SD

    LM5112SD

    TI

    Low-Side Gate Driver IC Inverting, Non-Inverting 6...

  • UCC28700DBVR

    UCC28700DBVR

    TI

    Converter Offline Flyback Topology 1kHz ~ 130kHz S...

  • LM78L05ACMX/NOPB

    LM78L05ACMX/NOPB

    Texas Instruments

    With its compact SOIC-8 package and RoHS complianc...