TI UCC27424MDGNREP
Low-Side Gate Driver IC Non-Inverting 8-HVSSOP
Marques: TI
Pièce Fabricant #: UCC27424MDGNREP
Fiche de données: UCC27424MDGNREP Fiche de données (PDF)
Colis/Caisse: HVSSOP-8
type de produit: MOSFET & Power Driver ICs
Statut RoHS:
État des stocks: 2000 pièces, nouveau original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Ajouter à la nomenclatureUCC27424MDGNREP Description générale
The UCC27423 and UCC27424 high-speed MOSFET drivers can deliver large peak currents into capacitive loads. Two standard logic options are offered – dual inverting and dual noninverting drivers. The UCC27424 thermally-enhanced 8-pin PowerPAD™ MSOP package (DGN) drastically lowers the thermal resistance to improve long-term reliability. The UCC27423 is offered in a standard SOIC-8 (D) package.
Using a design that inherently minimizes shoot-through current, this driver delivers 4 A of current where it is needed most – at the Miller plateau region during the MOSFET switching transition. A unique bipolar and MOSFET hybrid output stage in parallel also allows efficient current sourcing and sinking at low supply voltages.
The UCC27423 and UCC27424 provide enable (ENB) functions to better control the operation of the driver applications. ENBA and ENBB are implemented on pins 1 and 8, which previously were left unused in the industry-standard pinout. ENBA and ENBB are pulled up internally to VDD for active-high logic and can be left open for standard operation.
Caractéristiques
- Industry-Standard Pinout
- Enable Functions for Each Driver
- High Current-Drive Capability of ±4 A
- Unique Bipolar and CMOS True-Drive Output
Stage Provides High Current at MOSFET Miller
Thresholds - TTL-/CMOS-Compatible Inputs Independent of
Supply Voltage - 20-ns Typical Rise and 15-ns Typical Fall Times
With 1.8-nF Load - Typical Propagation Delay Times of 25 ns
With Input Falling and 35 ns With Input Rising - 4.5-V to 15-V Supply Voltage
- Dual Outputs can be Paralleled for Higher Drive
Current - Available in Thermally-Enhanced MSOP
PowerPAD™ Package With 4.7°C/W RθJC - Supports Defense, Aerospace, and Medical
Applications- Controlled Baseline
- One Assembly/Test Site
- One Fabrication Site
- Extended Product Life Cycle
- Extended Product-Change Notification
- Product Traceability
- APPLICATIONS
- Switch-Mode Power Supplies
- DC/DC Converters
- Motor Controllers
- Line Drivers
- Class-D Switching Amplifiers
All other trademarks are the property of their respective owners
Caractéristiques
Paramètre | Valeur | Paramètre | Valeur |
---|---|---|---|
Number of channels | 2 | Power switch | IGBT, MOSFET |
Peak output current (A) | 4 | Input VCC (min) (V) | 4.5 |
Input VCC (max) (V) | 15 | Features | Enable pin |
Operating temperature range (°C) | -55 to 125 | Rise time (ns) | 20 |
Fall time (ns) | 15 | Propagation delay time (µs) | 0.025 |
Input negative voltage (V) | 0 | Rating | HiRel Enhanced Product |
Driver configuration | Dual inputs |
Expédition
Type d'expédition | Frais d'expédition | Délai de mise en œuvre | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 jours | |
LA POSTE AÉRIENNE ENREGISTRÉE | $20.00-$40.00 (0.50 KG) | 2-5 jours |
Délai de traitement : les frais d'expédition dépendent des différentes zones et pays.
Paiement
Modalités de paiement | Frais de main | |
---|---|---|
Virement bancaire | facturer des frais bancaires de 30,00 $ US. | |
Pay Pal | facturer des frais de service de 4,0 %. | |
Carte de crédit | facturez des frais de service de 3,5%. | |
Western union | charge US.00 banking fee. | |
Paiement de Petit Montant | facturer des frais bancaires de 0,00 $ US. |
Garanties
1. Les composants électroniques que vous achetez incluent une garantie de 365 jours, nous garantissons la qualité du produit.
2. Si certains des articles que vous avez reçus ne sont pas de qualité parfaite, nous organiserons de manière responsable votre remboursement ou votre remplacement. Mais les articles doivent rester dans leur état d’origine.
Emballage
-
Étape1 :Produit
-
Étape2 :Emballage sous vide
-
Étape3 :Sac antistatique
-
Étape4 :Emballage individuel
-
Étape5 :Boîtes d'emballage
-
Étape6 :étiquette d'expédition à code-barres
Tous les produits seront emballés dans un sac antistatique. Expédié avec une protection antistatique ESD.
L'étiquette de l'emballage extérieur ESD utilisera les informations de notre société : numéro de pièce, marque et quantité.
Nous inspecterons toutes les marchandises avant expédition, garantirons que tous les produits sont en bon état et que les pièces sont neuves et correspondent à la fiche technique originale.
Une fois que toutes les marchandises sont garanties sans problème après l'emballage, nous les emballerons en toute sécurité et les enverrons par Global Express. Il présente une excellente résistance à la perforation et à la déchirure ainsi qu’une bonne intégrité du joint.
Points de pièce
-
The UCC27424MDGNREP chip is a high-speed, dual-channel gate driver designed for driving power MOSFETs and IGBTs in applications like motor control and power supplies. It offers high peak output current and fast switching speeds, enhancing system efficiency and reliability. Additionally, its small form factor and robust design make it suitable for various industrial and automotive applications.
-
Equivalent
Equivalent products to the UCC27424MDGNREP chip include the UCC27423, UCC27425, and UCC27426 from Texas Instruments. These devices are high-speed, dual-channel MOSFET drivers with similar specifications and features. -
Features
UCC27424MDGNREP is a dual-channel, high-speed, low-side gate driver with 4-A source and sink current capabilities. It features TTL input thresholds, wide supply voltage range, matched propagation delays, and an active Miller clamp. It is suitable for use in high-frequency switching applications in power electronics. -
Pinout
The UCC27424MDGNREP is a dual-channel, high-speed, low-side gate driver IC. It has 8 pins and functions to efficiently drive power MOSFETs and IGBTs in high-frequency switching applications. The pins include input, output, and supply connections for each channel, along with ground and enable pins. -
Manufacturer
Texas Instruments is the manufacturer of the UCC27424MDGNREP. It is an American company that designs and manufactures semiconductors and integrated circuits for a variety of applications, including power management, analog, and digital signal processing. -
Application Field
The UCC27424MDGNREP is commonly used in applications requiring high-speed, high-current drive capabilities, such as power inverters, motor control, switch-mode power supplies, and DC-DC converters. Its features make it suitable for various power electronics applications where fast and efficient switching is crucial. -
Package
The UCC27424MDGNREP chip comes in a Surface Mount Package. It has a 14-Pin SOIC (Small Outline Integrated Circuit) form factor. The size of the chip is 5mm x 5mm.
Nous fournissons des produits de haute qualité, un service attentionné et une garantie après-vente
-
Nous avons des produits riches, pouvons répondre à vos différents besoins.
-
La quantité minimum de commande commence à partir de 1 pièce.
-
Les frais d'expédition internationaux les plus bas commencent à partir de 0,00 $
-
Garantie de qualité de 365 jours pour tous les produits